• Journal of Pharmaceutical Investigation
• /
• v.41 no.1
• /
• pp.25-30
• /
• 2011

Recently, Korean Food and Drug Administration (KFDA) has focused on developing quality control guidelines for all commercial products in Korea to enforce regulations, improve the quality control, and protect consumers by developing prevalently used and efficient analytical tools to determine and quantify target compounds. Because the Korean Pharmacopeia (KP) presents microbiological assays for biotin, which is laborious and time-consuming, this study is focused on applying HPLC-UV to detect and quantify biotin in complex drugs and dietary supplements like multi-vitamin. Biotin in complex drugs was extracted from methanol and analyzed using mobile phase with 10 mM potassium phosphate (monobasic, pH=3.0) in distilled water and acetonitrile. Gradient condition was used to successfully detect and quantify biotin within 20 minutes. Validation result for linearity was significant that average $r^2$ was 0.999 (n=3) and its relative standard deviation (RSD) was 0.0578% which was less than 2%. Using this method, quantification of biotin in complex drugs was completed successfully and recovery tests were finished that recovery percentage greater than 95% with relative standard deviation less than 2%.

• Clean Technology
• /
• v.2 no.1
• /
• pp.47-52
• /
• 1996

The solvent extraction method was applied on a spent solution containing copper, which was produced in a printed circuit board process, to recover copper and to reuse the etching solution. Lix 64 N ($\alpha$-Hydroxyoxime + $\beta$-Hydroxybenzophenone Oxime) was used as a solvent. The acidic spent copper solution was mixed with and alkaline copper solution to pH=2. The solvent including 30 volume% of Lix 64 N extracted 17.1gr/l of copper from the mixed spent copper solution. In the continuous bench scale experiment, 4 stages for extraction, 2 stages for stripping and 4 stages for washing were used. Recovered copper was recycled as copper sulfate and the raffinate was reused as copper etchant. The percentage of copper recovery and the purity of copper sulfate were higher than 99.9%, respectively.

• Child Health Nursing Research
• /
• v.12 no.3
• /
• pp.359-367
• /
• 2006

Purpose: This study was to verify the effects of infant massage on weight recovery from physiologic weight loss, physical development of infants, and identity of their mothers. Method: A study with quasi-experimental design with time delay method was conducted from October 20, 2004 through February 20, 2005 with mothers and infants recruited from postpartum care center. 20 infants in the experimental group (once a day massage group) and 22 control group remained for the final analysis. Data were analyzed using SPSS win 11.0 program by frequency, percentage, mean, standard deviation, t-test and $X^2-test$. Results: There was no significant group difference in weight recovery from physiologic weight loss. However, experiment group showed significant increase in weight and chest circumference in 4 weeks after birth compare to the control group. For changes in behavior, experimental group showed more positive behavioral changes. The mothers who conducted massage for their infants showed higher score of identity as mothers. Conclusion: Since massage applied once a day can be still effective on physical growth of the infants, massage training program for mothers should be developed to apply easily for their infants at home. Further study is suggested to identify influencing factors on performed by mothers and identity as mothers.

• Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.38-44
• /
• 2005

Electro-thermal production of white phosphorus(WP, P4) generates substantial amount of highly toxic phossy water and sludges. Because of their high phosphorus contents and lack of reliable processing technology, large tonnages of these hazardous wastes have accumulated from current and past operations in the United States. In this study, two different methods for treatment of phosphorus sludge were investigated. These were bulk removal of WP by physical separation(froth flotation) and transformation of WP to oxyphosphorus compounds by air oxidation in the sludge medium. Kerosene, among other collectors, resulted in selective flotation of WP from the associated mineral gangue. Solvent action of kerosene occurring on the WP surface(by rendering WP particles hydrophobic) might produce the high selectivity of WP. The WP recovery in the froth was 79.3% from a sludge assaying 34.2% of WP. In the oxidation study, air gas was dispersed in the sludge medium by the rapid rotation of the impeller blades. The high level of sludge agitation intensity caused a fast completion of the oxidation reactions and it resulted in the high percentage conversion of WP to PO4-3 with PO3-3 making up almost all portion of oxyphosphorus compounds. The WP analysis on the treated sludge showed that supernatant solution and solid residue contained an average of 4.2 μg/L and 143 ppm respectively from the sludge containing about 26 g of WP. Further investigation will be required on operational factors to better understand the processes and achieve an optimum condition.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.462-473
• /
• 2019

The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.2
• /
• pp.110-116
• /
• 2001

This experiment was carried out to investigate the effects of amount of nitrogen application with the barley straw application on the changes in soil physical and chemical properties. nutrient uptake and percentage recovery of chemical fertilizer N in the rice plant from 1997 to 1998. The soil physical properties, such as bulk density, hardness, porosity and gaseous phase were improved by barley straw application. There was also improvement or increment in the soil chemical properties, such as pH, organic matter, T-C. T-N, available $SiO_2$, exchangeable K and cation exchange capacity, but decrease in available $P_2O_5$. The $Fe^{+{+}}$ content in soil after barley straw application was high from tillering stage to panicle forming stage, but becoming lowered toward the heading stage, while $Mn^{+{+}}$ content was increased. N uptake with barley straw application was increased in the N $126kg\;ha^{-1}$ plot, but decreased in the N $141kg\;ha^{-1}$ plot. The uptake of fertilized N was continued longer in barley straw application than none-application plot. Percentage recovery of chemical fertilizer N in rice straw was around 1% at tillering stage, but was highly increasing till maximum tillering stage, while the recovery was generally low in barley straw application. Meanwhile, fertilizer P uptake in barley straw application was high, but potassium uptake was low at all different levels of N application.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.15-21
• /
• 2007

Three newly authorized bivoltine silkworm hybrids namely, $CSR2{\times}CSR4$ (productive single hybrid), $(CSR6{\times}CSR26){\times}(CSR2{\times}CSR27)$ (productive double hybrid) and $CSR18{\times}CSR19$ (robust single hybrid) were chosen for the present study. These hybrids were subjected to different temperature and humidity treatments i.e., $25{\pm}$1^{\circ}C and RH $65{\pm}5%$ (control), $30{\pm}1^{\circ}C$, with combinations of low relative humidity (RH $65{\pm}5%$) and high RH ($85{\pm}5%$) at different stages during rearing and spinning of silkworm larvae. The larvae of after 3rd moult were subjected to different thermal and humidity stress till the assessment of cocoon traits. The comparative rearing and reeling performance clearly indicated that the deleterious effect of high temperature and high RH was more pronounced for the majority of traits such as cocoon uniformity, cocoon weight, shell weight, shell percentage, reelability, filament length, raw silk percentage raw silk recovery denier and waste percentage on silk weight than other temperature and RH treatments and this effect was almost similar for all three silkworm hybrids studied. The present investigation clearly indicate that the deleterious effect of high temperature and high RH was more pronounced on rearing and spinning of silkworm larvae than other temperature and RH treatments and similar effect was noticed for all the three silkworm hybrids studied. The cocoon characters can be improved by providing ideal environmental conditions even during spinning stage of larvae affected with high temperature and RH. The study also suggest that high temperature and low humidity has greater effect during rearing stage than spinning stage.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.233-240
• /
• 1996

This study was carried out to determine the effect of cumulus cell attachment and various factors on in vitro maturation of pig foflicular oocytes. Oocytes with various configuration of cumulus cell mass were collected ftom ovaries of mature gilts by asperating with syringe equipped with needles of different gauges, follicle size and with or without cumulus cells. They were cultured in TCM-199 mediun containing FGS(fetal calf serum) for 30~48 hours in incubator with air containing 5% $CO_2$ at 38.5$^{\circ}C$. Mter orcein staining at in vitro maturation condition, GV, GVBD, anaphase, telophase and M II were observed. Results are surumarized as follows: 1. Recovery rates were 55.8, 55.5 and 34.4% when the cumulus-compacted oocytes were collected with 18, 21, 26 gauge needles of syringes, respectively. 2. 79% of oocytes with compacted cumulus cells were at GV stage and most of the oocytes with partially denuded and denuded cumulus cells were from GVBD to M- II stages. 3. Percentage of mature oocytes among those which are follicular diameter of 1~2, 3~6 and over 6 mm was 42.6, 53.2 and 60.8%, respectively. 4. Percentage of mature oocytes among those which are compacted, partially denuded and denuded was 60.5, 46.2 and 35.4% respectively. 5. Percentage of mature oocytes in co-cultured with monolayers of cumulus cells was higher (57.1%) than that found with oocytes cultured alone (53.4%).

• Korean Journal of Animal Reproduction
• /
• v.21 no.4
• /
• pp.373-379
• /
• 1997

This study was carried out to determine the hormone treatment scheme for an efficient superovulation and optimal recovery time for obtaining pronuclear embryos suitable for DNA injection in Korean native goats. For a superovulation, FSH(5.6mg) was given over four days in twice daily injections with (FSH/hCG group) or without(FSH group) hCG(100 IU) co-injection at the time of 7th FSH injection. Estrus cycle was synchronized by norgestomet ear-implantation for 11 days and its removal at the time of 6th FSH injection. Among the treated goats, the percentage of ovulated goats, which were examined at 70 to 76 h following implant removal, was greater in FSH/hCG group than in FSH group (100% vs 36.4%) but there was no significant difference in the mean numbers of ovulation points and fertilization rates between the two groups. To optimize hCG treatment scheme and recovery time, we injected hCG at the time of 7th (FSH/hCGa) or 8th(FSH/hCGb) FSH injection and then examined the developmental stage of the embryos recovered at different times after implant removal. In FSH/hCGa group, significant portions(31 to 44%) were beyond 1-cell stage, which was non-injectable, irrespective of their recovery time. However, in FSH/hCGb group recovered at 70 to 76 h after implant removal, great portions(69%) were fertilized and most of them(96.6%) were injectable 1-cell stage. Considering together the fertilization rate and developmental stage of recovered embryos, it is recommendable to administrate hCG at the time of final 8th FSH injection and collect the embryos at 70 to 76 h after implant removal to obtain injectable embryos as many as possible in Korean native goats.

• Journal of Acupuncture Research
• /
• v.19 no.5
• /
• pp.112-123
• /
• 2002

Background and Objective : The evaluation of facial nerve function is a complex procedure. The House-Brackmann facial nerve grading system(H-B grade)and the Yanagihara grading system(Y-system) have been recommended as universal standards for assessing the degree of facial nerve palsy. The purpose of this study is to compare the effectiveness of Y-system and H-B system and to know the advantages of each system for each stage of incomplete recovery or sequelae of facial paralysis. Materials and Methods : A comparison between H-B grade and Y-system was studied with 137 evaluations of 61 cases of incomplete recovery or sequelae of peripheral facial paralysis. Each case was graded by using H-B system as a gross system and Y-system as a regional system before treatment, after 12 weeks and 6 months Results and Conclusions : The range of score in the Y-system 0-6, 8-16, 14-22, 24-34, 32-38, 38-40 were matched with grade VI, V, IV, III, II and I in the H-B system. The percentage of H-B grade III was the greatest among 137 evaluations and y-system showed the greatest score range. H-B system is easy to use but Y-system is more objective, quantitative and convenient to use in the incomplete recovery or sequelae state.