• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.88-99
• /
• 1978

In this study, rice harvesting systems suitable to Korean situations and the optimum timing of these systems were determined, respectively, based on experimentally determined factors such as filed yield and the milling quantity and quality measured at various levels of the grain moisture content at harvest. Rice varieties used for the experiment were the AKIBARE (Japonica-type) and the SUWEON 251 (high yielding TONGIL sister-line variety), The harvesting systems studied by the experimental work of this study were traditional system with both the wet material and dry-material threshing system by use of binder with both the dry-material and wet-material threshings, and system by use of combine. Grain samples were taken from final products of the paddy rice harvested from the experiment a fields for each system to measure the recovery rates of the milled rice. The results may be summarized as follows; 1. The milling recovery rate of the AKIBARE variety had highest value within the range of the grain moisture at harvest, showing from 21 to 26 percent. The head-rice recovery for the same variety was a little greater in the wet-material threshing than in the dry-material threshing , higher values of which , were 20 to 25 percent , seen within the range of grain moisture at harvest regardless of the harvesting systems tested. 2. The milling recovery of the SUWEON 251 , when tested for different harvesting systems and harvesting grain moisture, did not show a statistically significant different. In contrast , head-rice recovery for the systems operated by the wet-material threshing was much greater than that by the -material threshing. The difference of the recoveries between these systems range from 2.6 to 4.7 percent. 3. An assessment of the optimum period of -harvest timing for each of the harve\ulcornersting systems tested were made bJ.sed on (a) the maximum total milled-rise yield and (b) the percentage reduction in the total milled-rice yield due to untimely harvest operations. The optimum period determined are: 23-19% for the ATD, AC, STD, SBW, STW systems, 25-21% for the ATW ani ABW systems, and 27-18% for the ABD, SBD, and SC systems, respectively.

• Journal of Ginseng Research
• /
• v.1 no.1
• /
• pp.79-88
• /
• 1976

A determinatien of the saponins in ginseng tea and extract was carried out by using the quantitative TLC autodetector equipped with a hydrogen flame ionization detector. In order to apply to the Quality central of the ginseng tea and extract. the optimum condition and recovery percentage for the quantitative determination of saponins in these products duo studied. The results obtained were as follows: The method was adequate to estimate whether the ginseng extract used for the Products and She raw ginseng extract were the same quality or net. Most of the individual peak area was increased with the concentration of the total saponin. But some of the peak areas were net increased quantitatively in the ease of the sample containing high concentration ginseng extract. To deternine the saponins in ginseng tea correctly high volume low concentration was better than the low volume high concentration. Optimum concentration of ginseng extract in sample to determine the individual saponins was in the range of 0.5∼1.5g. The recovery percentage of the total saponin was 99.5% on the average.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.32-38
• /
• 2004

Recently, Orimulsion (a bitumen-in emulsion) has received increasing attention as an alternative fuel. Orimulsion combusion produces an ash rich in V, Ni and Mg which are processed to recover metals. As a basic study to recover V from Orimulsion ash, physico-chemcial properties and leaching behaviours were investigated. Orimulsion ash was fine size grains ($d_{50}$ 5.9 $\mu\textrm{m}$) with 16% V, 4 % Ni and 9% S. Vanadium was easily leached in water because Orimulsion ash was mainly constituted of metal sulfates. However, the increase of leaching temperature decreased the extraction percentage of vanadium because of hydrolysis of V(V) to vanadium pentoxide. The addition of sulfuric acid could increase the leaching percentage vanadium. In case of alkaline leaching for selective recovery of vanadium, the oxidzing agent such as $H_2$$O_2$ is required to improve the leaching per-centage

• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.154-162
• /
• 2010

This study was carried out to compare the efficacy and selectivity of TOS and BS media for enumeration of bifidobacteria in commercial fermented milk products. First, bifidobacteria was isolated from 20 fermented milk products, and all isolated bifidobacteria were identified by genomic technology as Bifidobacterium lactis. The two media significantly differed from each other with regard to the recovery of B. lactis, that is, the recovery of this organism was as much as 6 logs lower on BS medium than on TOS. When the concentration of BS solution (mixture of paromomycin sulfate, neomycin, sodium propionate, and lithium chloride) used in BS medium was reduced to 50% (BS50), a relatively high percentage recovery of bifidobacteria from pure cultures was achieved. Susceptibility tests to antibiotics and tests for selective agents for the isolated bifidobacteria and lactic acid bacteria were conducted. The BS solution inhibited some lactic acid bacteria and Bifidobacterium species, while mupirocin (MU) suppressed the growth of all tested lactic acid bacteria but not Bifidobacterium. As compared with BS50 medium, TOS with or without MU showed good bifidobacteria recovery and readily distinguishable colonies; in particular, TOS supplemented with MU had a high selectivity for bifidobacteria. In conclusion, all results suggested that TOS medium with or without MU was found to be suitable for selective enumeration of bifidobacteria from mixed cultures in fermented milk, and better in that capacity than BS medium.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.6
• /
• pp.717-726
• /
• 2005

Statement of problem. One of the common problems of provisional crown and fixed partial denture materials is that when they are subjected to constant loads for a long period of time, they exhibit a dimensional change (creep). Purpose. The aim of this study was to investigate the viscoelastic behaviour of polymer-based provisional crown and fixed partial denture materials with time at constant compressive load. Material and methods. Three dimethacrylate-based materials (Protemp 3 Garant, Temphase, Luxatemp) and one monomethacrylate-based material (Trim) were selected. Dimensional changes of the specimens were recorded by a LVDT to evaluate their viscoelastic behavior and creep strain. For all specimens, two loading procedures were used. At first, static compressive stress of 4 MPa was applied for 30 minutes and followed by 1 hour of strain recovery. Then, after 24 hours of water storage, the specimens were loaded again. The creep values between materials were statistically analyzed using one-way ANOVA and multiple comparison $Scheff\acute{e}$ test. Independent samples t-test was also used to identify the difference of creep strain between first and secondary loading conditions at the significance level of 0.05. Results. Following application of the first loading, Trim showed the highest maximum creep strain (32.7%) followed by Luxatemp, Protemp 3 Garant and Temphase, with values of 3.78%, 2.86% and 1.77%, respectively. Trim was significantly different from other materials (P<0.05), while there were no significant differences among Luxatemp, Protemp 3 Garant and Temphase (P>0.05). The highest recovery and permanent set of Trim, were significantly different from those of others (P<0.05). At the secondary loading of the dimethacrylate-based materials, creep deformation, recovery and permanent set decreased and the percentage of recovery increased, while in Trim, all values of the measurements increased. This result showed that the secondary loading at 24 hours produced a significant creep magnitude. Conclusion. The dimethacrylate-based provisional crown and fixed partial denture materials showed significantly higher creep resistance and lower deformation than the monomethacrylate-based material. Thus, monomethacrylate-based materials should not be used in long-term stress-bearing situations.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.309-316
• /
• 1996

The aim of this study is to elucidate sperm chemotaxis and to set up the optirnal condition for selection of motile and capacitated sperm from hovine frozen-semen. Thus, the effects of semen-washing after thawing, concentrations of progesterone (P4) and bovine serum albumin (BSA), and sperm-washing frequency on sperm selection were examined. For evaluating their effects, number, viability and acrosome reaction of sperm swim-up seperated from semen, which were incubated for 30 minutes at 36$^{\circ}C$ in the M2 solution containing P4 and BSA, were investigated. For frozen-semen just after thawing, sperm recovery and viability were not significantly different between P4-treated and -untreated semen. However, washing frozen-semen decreased the number of sperm and increased the viability of sperm that were recovered from semen treated with P4. Progesterone affected the recovery rate, the viability and the acrosome-reaction rate of sperm recovered from washed frozen-semen. Especially, number of motile and capacitated sperm were highest in semen treated with 50$\mu$g /ml among 0, 20, 50 and 100$\mu$g /ml of P4 concentrations. BSA affected the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4. Especially, the percentage of viable sperm were highest in semen treated with 4mg /ml among 0, 2, 4, and 6mg /ml of BSA concentrations. Repeatedly sperm-washing did not affect the recovery rate and the viability of sperm recovered from washed frozen-semen that were treated with 50$\mu$g /ml of P4 and 4mg /ml of BSA In conclusion, using progesterone and BSA could efficiently make the selection of motile and capacitated sperm from washed frozen-semen.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.1
• /
• pp.86-100
• /
• 2002

Purpose: The purpose of the study was done to identify the nursing care needs of patients in the recovery room. Method: The subjects in this study were 127 patients in a recovery room between 6/9/2001 and 24/9/2001. The instrument used for this study was the descriptive questionnaire developed by Shin Hyun-Jin (1999). The data was analysed by frequency, percentage, mean, standard deviation, t-test, ANOVA, and factor analysis using the SPSS program. Result: 1) Kaiser - Meyer -O1kin sample appropriateness was 799 and Bartlett's test of sphericity significant probability was .000. 2) The mean score for nursing care need of patients in the recovery room was $4.17{\pm}.51$ of a total possible score of 5. The score of nursing need for different parameters was as follows : Educational need ($4.31{\pm}.49$), physical need ($4.27{\pm}.47$), emotional need ($4.11{\pm}.52$), environmental need ($3.99{\pm}.56$). 3) Differences in the needs for nursing care according to the demographics were significant for gender, marital status, operation experience, and departments consulted. General characteristic variables significantly related to nursing need were as follows: Physical need significantly related to the departments consulted (F=2.23, p=.036). Educational need significantly related to the marital status (F=2.55. p=.012), departments consulted (F=2.30, p= 031). Emotional need significantly related to the marital status (F=2.22, p=.028). Environmental need significantly related to the gender (t=-2.44, p= .016), marital status (F=2.01, p= .046). operation experience (t=-1.99. p= .048). Conclusion: Nursing care needs of patients in the recovery room are significantly related to educational need, physical need, emotional need and environmental need. Intervention plans and program need to be developed to improve strategies to meet nursing needs of patients in the recovery room.

• Journal of Life Science
• /
• v.15 no.1 s.68
• /
• pp.9-14
• /
• 2005

Batch enzymatic hydrolysis of egg yolk protein by protease was carried out at laboratory scale coupled to an ultrafiltration module. Effect of ethanol concentrations on the performance of enzymatic hydrolysis was studied to determine the optimum condition of recovery of hydrolysate. The enzymatic hydrolysis was conducted stepwise with following conditions, $50^{\circ}C$, pH 10.0 and pH 6.5. Ethanol concentration was changed from 10 to $40\%$ (w/w). As ethanol concentration was increased, the recovery yield of total solid and protein in enzymatic hydrolysate was also increased. The content of sialic acid and protein in hydrolysate was independent of ethanol concentration. We also investigated the effect of ethanol concentration on the performance of ultrafiltration. As the concentration of ethanol in yolk protein was increased, the recovery yield of product was increased. Ultra­filtration of egg yolk protein hydrolysate was conducted to increase the content of sialic acid. Four ultrafiltation modules were used in this study, and we evaluated the performance of the UF modules. When Amicon module was used, the recovery percentage of total solid in retentate was $6.0\%$, which is the highest among the modules used. In spite of the difference in the recovery yield of total solid, the purity of sialic acid in retentate was about $2.0\%$, which was 5 times higher than that in feed. It was concluded that the recovery yield and the purity of sialic acid did not correlate with the types of modules and the size of MWCO.

• Preventive Nutrition and Food Science
• /
• v.19 no.3
• /
• pp.156-163
• /
• 2014

We investigated the effects of a high-protein diet and resveratrol supplementation on immune cells changes induced by abdominal irradiation in rats. Female Wistar rats were divided into 5 groups: 1) control diet, 2) control diet with irradiation 3) 30% high-protein diet with irradiation, 4) normal diet with resveratrol supplementation and irradiation, and 5) 30% high-protein diet with resveratrol supplementation and irradiation. We measured blood protein and albumin concentrations, lipid profiles, white blood cell (WBC) counts, proinflammatory cytokine production, and splenocyte proliferation in rats that had been treated with a 17.5 Gy dose of radiation 30 days prior. A high-protein diet affected plasma total cholesterol and very low density lipoprotein-cholesterol levels, which were increased by the radiation treatment. In addition, the lymphocyte percentage and immunoglobulin M (IgM) concentration were increased, and the neutrophil percentage was decreased in rats fed a high-protein diet. Resveratrol supplementation decreased the triglyceride (TG) level, but increased the IgM concentration and splenocyte proliferation. Proinflammatory cytokine production was lower in rats fed a high-protein diet supplemented with resveratrol than in rats fed a control diet. The results of the present study indicate that high-protein diets, with or without resveratrol supplementation, might assist with recovery from radiation-induced inflammation by modulating immune cell percentages and cytokine production.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.79-87
• /
• 2020

The extraction and stripping of HCl from aqueous solutions by commercial extractants like LIX 63 and its mixture with TEHA/ Cyanex 923/ Aliquat 336 and ionic liquids like ALi-SCN, ALi-PC in kerosene was investigated. Among these extractants, ALi-PC showed the best extraction effectivity (above 80%), but it was difficult to strip HCl from the loaded phase. Although the extraction percentage of HCl by LIX 63 was not high, the stripping performance was above 81%. The addition of octanol to the organic phase led to negative effect on the extraction performance of HCl. The addition of C2H5OH into aqueous solutions significantly increased the extraction and stripping percentage of HCl by LIX 63, ALi-PC and ALi-SCN.