• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.76-84
• /
• 1986

Analyses of lead and zinc were made by means of standard addition method using atomic absorption spectrophotometer(Baird Ltd., Model A5100) with flameless method for lead and flame method for zinc. The blood samples used were merely diluted with triton x-100, because it was simple, rapid and minimal risk of contamination. Mean recovery rate for lead added to the blood ranged from 97.7 to 101.3% with coefficient of variation ranging from 1.9 to 10.7%, and that for the added zinc ranged from 99.0 to 102.2% with coefficient of variation ranging from 2.1 to 9.1%. In repeated measurements of zinc in the blood, good reproducibility and interindividual variation were proved(p<0.01). In comparison of the lead and zinc concentrations in the blood determined by the standard addition method and standard method, there were good correlations between 2 sets of data (r=0.9731 for lead and r=0.9785 for zinc), although lead levels were estimated higher by the former method(p<0.01) and zinc levels by the latter method(p<0.01). It can be concluded that lead and zinc levels in blood standard addition method is reliable for determination of lead and zinc in the blood with good accuracy and reproducibility.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.515-518
• /
• 2002

The method of foam fractionation can be applied to enrich proteins from a dilute protein solution if the proteins are hydrophobic and foam. If a protein, such as invertase, is hydrophilic, a dilute solution containing this protein may not foam. In that case, a batch foam fractionation process may not be appropriate for recovering a concentrated solution of that protein. In this paper, various concentrations of invertase were added to a dilute solution containing bromelain (a hydrophobic protein), in order to determine how the presence of a hydrophilic protein can affect the recovery of the desired hydrophobic protein. The effect of invertase on bromelain recovery was studied here at an initial bulk solution pH of 5 and an air superficial velocity of 4.6 cm/s.

• Transactions of Materials Processing
• /
• v.33 no.1
• /
• pp.43-49
• /
• 2024

A high strength steel sheet (HSSS) has widely used to improve the specific rigidity of parts and the safety of the passenger in automotive industries. However, the HSSS is difficult to manufacture precise parts through a forming process due to the reduced elongation and the increased elastic recovery. The goal of the paper is to investigate the improved design of bending dies for DP590 HSSS. The over forming type bending dies with cam systems added to the side of the formed part is proposed to improve the quality of the part. The effects of the die design and the forming parameter on formability and elastic recovery characteristics is examined using finite element analyses (FEAs). From the results of FEAs, proper die design and forming parameters are predicted.

• Korean Journal of Animal Reproduction
• /
• v.14 no.4
• /
• pp.263-271
• /
• 1990

This study was carried out to investigate the factors affecting maturation in vitro of follicular oocytes in Korean Native Cattle. The bovine ovaries were obtained at a slaughter house and the follicular oocytes were recovered by aspirating the follicular fluid from the visible follicles of 3~6mm. The bovine oocytes were matured in vitro in TCM-199 containing FCS and hormones. The effects of TCM-199 salt type, number of oocytes per drop, incubation time and co-culture with granulosa cells on maturation of oocytes, were investigated. The results obtained are summarized as follows. 1. The maturation rates of follicular oocytes cultured for 22, 25 and 28 hours in Hank's TCM-199 or Earle's TCM-199 were 59.3, 59.6, 80% and 80.0, 90.0, 93.7%, respectively. The maturation rate of follicular oocytes in Earle's TCM-199 was faster and higher than in Hank's TCM-199(P<0.05). 2. The maturation rates of oocytes were 54.5, 62.5 and 62.0% when cultured the oocytes number 10, 20 and 40 per 200${mu}ell$ drop for 18 hours. 3. The maturation of follicular oocytes in the Korean Native Cattle was induced at 14 hours culture, by giving the maturation rate of 90.0% after 20 hours. 4. The maturation rates were 63.3% and 66.7%, respectigely when the oocytes were co-cultured with granulosa cells from medium-size follicles used immediately after recovery in the presence or absence of hormones added(0.02AU/ml FSH, 10$\mu\textrm{g}$/ml LH and 1$\mu\textrm{g}$/ml estradiol 17-$\beta$). When the oocytes were co-cultured with granulosa cells from medium-size follicles cultured for 3 days, the maturation rates were 20.8% and 76.2%, respectively(P<0.05). 5. The maturation rate were 88.0% and 70.0%, respectively when the oocytes were co-cultured with granulosa cells from large-size follicles used immediately after recovery in the presence or absence of hormones added(0.02AU/ml FSH, 10$\mu\textrm{g}$/ml LH and 1$\mu\textrm{g}$/ml estradiol 17-$\beta$)(P<0.05). When the hormones added(0.02AU/ml FSH, 10$\mu\textrm{g}$/ml LH and 1$\mu\textrm{g}$/ml estradiol 17-$\beta$)(P<0.05). When the oocytes were co-cultred with granulosa cells from large-size follicles cultured for 3 days, the maturation rates were 41.2% and 73.3%, respectively(P<0.05).

• Journal of Embryo Transfer
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1991

The objective of this experiment was to study some possibilities to simplify freezing, thawing and transfer procedure of one-step straw method comparing with the conventional methods using bovine embryos. The previous work are also designed to investigate the thawing effect by development stage and its quality using the embryos. Results obtained were summarized as follows: 1. A total of 87 embryos from 14 donor cows were frozen-thawed and an average of frozen embryo/donor was 6.2. 2. The survival rates of morula stage(65.4%) were higher than those of blastocyst stage(57.l%) and vice versa in rate of morphological recovery (80% vs 95.4%). However. no significant difference was denoted between them. 3. In difference between the groups of good quality and poor quality. good quality was resulted in a significantly higher embryo survival rate(75%) and recovery rates(95%) than poor quality(P<0.0l). 4. In effects of non-permeable sugar dilution in added to l.0M glycerol. higher survival rates were orderd in sucrose. lactose, raffinose and xylose. But lactose-raffinose, sucrose-trehalose and xylose in added to 2.OM glycerol. 5. The highest survival rates were obtained by direct plunge into the liquid nitrogen with 3.OM concentration both of glycerol and trehalose. 6. The survival rates in vitro condition of one-step and direct plunge methods(75%-87.5%) were significantly higher than those of multiple steps (21.4-52.6%) in in vitro (P<0.0l). However, the results of single-step were critical in comparing to other steps of final pregnant conformation.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.313-318
• /
• 2006

A two-stage process of nanofiltration and water-splitting electrodialysis was investigated for lactic acid recovery from fermentation broth. In this process, sodium lactate is isolated from fermentation broth in the first stage of nanofiltration by using an NTR-729HF membrane, and then is converted to lactic acid in the second stage by water-splitting electrodialysis. To determine the optimal operating conditions for nanofiltration, the effects of pressure, lactate concentration, pH, and known added impurities were studied. Lactate rejection was less than 5%, magnesium rejection approximated 45%, and calcium rejection was at 40%. In subsequent water-splitting electrodialysis, both the sodium lactate conversion to lactic acid and sodium hydroxide recovery, were about 95%, with a power requirement of $0.9{\sim}1.0\; kWh$ per kg of lactate.

• Advances in environmental research
• /
• v.5 no.2
• /
• pp.141-151
• /
• 2016

Large amounts of aluminum hydroxide ($Al(OH)_3$) exist in water purification sludge (WPS) because of the added aluminum coagulant in water treatment process. Notably, $Al(OH)_3$ is an amphoteric compound, can be dissolved in its basic condition using sodium hydroxide to form aluminate ions ($Al(OH)_4{^-}$). However, in a process in which pH is increasing, the humid acid can be dissolved easily from WPS and will inhibit the recovery and reuse of the dissolved aluminate ions. This study attempts to fix this problem by a novel approach to separate $Al(OH)_4{^-}$ ions using nanofiltration (NF) technology. Sludge impurity in a alkaline solution is retained by the NF membrane, such that the process recovers $Al(OH)_4{^-}$ ions, and significantly decreases the organic matter or heavy metal impurities in the permeate solution. The $Al(OH)_4{^-}$ ion is an alkaline substance. Experimental results confirm that a recovered coagulant of $Al(OH)_4{^-}$ ion can effectively remove kaolin particles from slightly acidic synthetic raw water.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2001

For the production and purification of a single chain human insulin precursor, four types of fusion peptides $\beta$-galactosidase (LacZ), maltose binding protein (MBP), glutathione-S-transferase (GST), and (His)(sub)6-tagged sequence (HTS) were investigated. Recombinant E. coli harboring hybrid genes was cultivated at 37$\^{C}$ for 1h, and gene induction occurred when 0.2mM of isopropyl-D-thiogalactoside (IPTG) was added to the culture broth, except for E. coli BL21 (DE3) pLysS harboring a pET-BA cultivation with 1.0mM IPTG, followed by a longer than 4h batch fermentation respectively. DEAE-Sphacel and Sephadex G-200 gel filtration chromatography, amylose affinity chromatography, glutathione-sepharose 4B affinity chromatography, and a nickel chelating affinity chromatography system as a kind of immobilized metal ion affinity chromatography (IMAC) were all employed for the purification of a single chain human insulin precursor. The recovery yields of the HTS-fused, GST-fused, MBP-fused, and LacZ-fused single chain human insulin precursors resulted in 47%, 20%, 20%, and 18% as the total protein amounts respectively. These results show that a higher recovery yield of the finally purified recombinant peptides was achieved when affinity column chromatography was employed and when the fused peptide had a smaller molecular weight. In addition the pET expression system gave the highest productivity of a fused insulin precursor due to a two-step regulation of the gene expression, and the HTS-fused system provided the highest recovery of a fused insulin precursor based on a simple and specific separation using the IMAC technique.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.99-107
• /
• 1997

This study Provides the treatment methods of liquid wastes from the dissolution/purification process of nuclear fuel raw material and the fabrication process of nuclear fuel powder. One of the treatment methods is to process liquid waste from uranium raw material dissolution/purification process. This waste, of the strong acid, can be reused to dissolve the fine ADU particles in filtrate which is ADU waste of pH 8.0 converted from AUC waste after recovery of uranium. To dissolve the fine ADU particles, ADU filtrate was pretreated to pH 4.0 with the dissolution/purification waste, and then mixed with the lime to pH 9.2 and aged for 30 minutes. From this processing, uranium content of the filtrate was decreased to below 3ppm. The waste from fuel powder fabrication is emulsified solution dispersed with fine oil droplets. This emulsion was destroyed effectively by adding and mixing the nitric acid with rapid heating at the same time. After this processing, $Na_2U_2O_7$ compound is produced by addition of NaOH. Optimum condition of this processing was shown at pH 11.5, and uranium content of the filtrate was analyzed to 5ppm. To remove the trace of uranium in the filtrate, lime should be added. Otherwise, 4N nitric acid was used to destroy the emulsion directly, and then lime was added to this waste. Uranium content of the treated filtrate was below 1 ppm. In addition to these wastes, the trace of uranium in filtrate after recovery of uranium from the AUC waste which is produced during PWR power preparation, is treated with NaOH to takeup fluorine(F) in the waste because fluorine is valuable and toxic material. In the finally treated waste, uranium was not detected.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.