• Journal of Advanced Marine Engineering and Technology
• /
• 제21권2호
• /
• pp.178-185
• /
• 1997

According to the wide - spread use of rectifier in electronic equipments, such problems as electronic components failures or equipment disorders have been occurred due to current harmonics. To overcome these problems, power factor correction circuits employing boost converter have been used. The high switching stress of boost converter can be reduced by snubber circuit. Recently, research activities in snubber circuits have been directed to energy recovery snubber for improving the efficiency of power converter. In this study, a new passive snubber circuit which can recover trapped snubber energy without added control is proposed for boost converter. The control of boost converter with proposed snubber is the same as the conventional one. In addition, the energy recovery circuit can be implemented with a few passive components. The circuit operation is confirmed through simulation.

• 한국기계가공학회지
• /
• 제16권1호
• /
• pp.58-62
• /
• 2017

In this paper, we studied the structural design for safety improvement of the winch mount of the armored recovery vehicle. From the finite element analysis using the safety factor of the original winch mount, the results determined that the safety factor was very low, namely 1.14 at $-15^{\circ}$ when towing the maximum force. For considering the usage and safety, the safety factor needs to increase to between 1.4 and 1.6. To improve the safety factor, a re-design, such as shape modification and strengthening the welded zone, was performed. After the improvement of the structural design, the safety factor of the improved mount was calculated at 1.78, an increase of about 56.1% from that of the original mount.

• 대한한의학회지
• /
• 제30권3호
• /
• pp.39-50
• /
• 2009

Objective : The aim of this study was to evaluate the effects of Aconiti ciliare tuber on the descending pain and the recovery of locomotor function that results from sciatic crushed nerve injury in rats. Method : In order to assess the effects of the aqueous extract of Aconiti ciliare tuber on the recovery rate of locomotor function, we investigated the walking track analysis, and for the effects on the pain control we investigated brain-derived neurotrophic factor (BDNF) and inducible nitric oxide synthase (iNOS) expression in the sciatic nerve and on the expressions of c-Fos in the ventrolateral periaqueductal gray (vlPAG) region resulting from the sciatic crushed nerve injury in rats. Result : Treatment with Aconiti ciliare tuber significantly enhanced the SFIvalue, enhanced BDNF expression, decreased iNOS expression, and suppressed c-Fos expression. The present results showed that Aconiti ciliare tuber facilitated functional recovery following sciatic crushed nerve injury in rats. The recovery mechanisms of SFI by Aconiti ciliare tuber might be ascribed to the increase of BDNF expression for nerve regeneration and reinnervation and to the suppression of iNOS expression for inhibiting nerve inflammation. Conclusion : In this process it has been shown that Aconiti ciliare tuber can be used for pain control and functional recovery from peripheral nerve injury.

• 여성건강간호학회지
• /
• 제13권2호
• /
• pp.98-104
• /
• 2007

Purpose: The purpose of this study was to explore the barriers and the enhancing factors and predictors to postpartum care performance. Methods: The Research design in this study was a cross-sectional correlational survey. Subjects were 145 women at 6 to 10 weeks post delivery at an OB & GY clinic. Data was gathered with postpartum care performance, and other related variables including emotional status during pregnancy, fatigue, health recovery status, maternal role and identity. Data was analyzed using the SPSS WIN(version 11.0) program. Results: The mean score of postpartum care performance was 3.08 of 5, it had significant differences in emotional status during pregnancy, coincidence of expected sex, health recovery status, postpartum fatigue and postpartum depression. The maternal role and health recovery status were enhancing factors of postpartum care performance. Also, the barrier factors were fatigue, depression and coincidence of expected sex. Among these factors, the present health recovery status had an predictability of 11.7%, postpartum fatigue 3.2%, and coincidence of expected sex 2.5%, for a total predictability factor of 17.4% on postpartum care performance. Conclusion: Among these related factors to postpartum care performance, present health recovery status was the most predictable factor and then postpartum fatigue, and coincidence of expected sex. We need to establish a strategy to reduce postpartum fatigue and implement nursing interventions for health related consequences in postpartum women.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권10호
• /
• pp.501-507
• /
• 2001

In this paper, new high-efficiency zero voltage switching (ZVS) AC-DC boost converter is proposed to achieve power factor correction by simplifing energy recovery circuit. A lot of high power factor correction circuits have been proposed and applied to increase input power factor and efficiency. Most of these circuits may obtain unity power factor and achieve sinusoidal current waveform with zero voltage or/and zero current switching. However, it is difficult for them to obtain low cost, small size, low weight, and low noise. The topology proposed to improve these problems can compact the devices in circuit and can achieve high efficiency ZVS AC-DC boost converter. Simulation and experimental results show that this topology is capable of obtaining high power factor and increasing the efficiency of the system.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.47-58
• /
• 2015

Four recycling scenarios involving pyroprocessing of spent fuel (SF) have been investigated for a 600-MWe transmutation sodium-cooled fast reactor (SFR), KALIMER. Performance evaluation was done with code system REBUS connected with TRANSX and TWODANT. Scenario Number 1 is the pyroprocessing of Canada deuterium uranium (CANDU) SF. Because the recycling of CANDU SF does not have any safety problems, the CANDU-Pyro-SFR system will be possible if the pyroprocessing capacity is large enough. Scenario Number 2 is a feasibility test of feed SF from a pressurized water reactor PWR. Thefsensitivity of cooling time before prior to pyro-processing was studied. As the cooling time sensitivity of cooling time before prior to pyro-processing was studied. As the cooling time increases, excess reactivity at the beginning of the equilibrium cycle (BOEC) decreases, thereby creating advantageous reactivity control and improving the transmutation performance of minor actinides. Scenario Number 3 is a case study for various levels of recovery factors of transuranic isotopes (TRUs). If long-lived fission products can be separated during pyroprocessing, the waste that is not recovered is classified as low- and intermediate-level waste, and it is sufficient to be disposed of in an underground site due to very low-heat-generation rate when the waste cooling time becomes >300 years at a TRU recovery factor of 99.9%. Scenario Number 4 is a case study for the recovery factor of rare earth (RE) isotopes. The RE isotope recovery factor should be lowered to ${\leq}20%$ in order to make sodium void reactivity less than <7$, which is the design limit of a metal fuel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.942-943
• /
• 2008

The boost converter is usually used in power factor correction. The dynamic losses of its output diode are produced during the reverse recovery time. The power efficiency is decreased due to the losses and also it generates the noise. These disadvantages have been remarkably improved by ZCS and ZVS techniques of power factor improvement circuit. Some benefits lead to the achievement of higher power density and the development cost can be decreased. In this paper work, the reverse recovery suppression(RS) PFC method is used. A inductor and a diode are added into the conventional circuit. The switching device, MOSFET is turned off after the reverse recovery current has come to the zero level. The Zero Current Switching(ZCS) is implemented at that time. This power conversion technique improves the efficiency to about 1% and reduces the noise obviously. And the additional inductor can be designed using an original filter core in the circuit. The converter size is reduced effectively.

• 한국전문물리치료학회지
• /
• 제2권2호
• /
• pp.98-107
• /
• 1995

Physical therapists use assumptions about motor control in every aspect of their work in treating stroke patients. An understanding of the recovery process after stroke, some neural mechanism of recovery and therapeutic model is critical factor for physical therapist to evaluate and obtain a higher final stage of recovery. The purpose of this article was to review the recovery process after stroke, some neural mechanism of recovery, the role of rehabilitation in the process of recovery, therapeutic model and its limitation. This article will help understanding of recovery process. evaluation, and treatment of the stroke patients. Each therapeutic method consists of a different set of assumptions and they are not completely independent of one another. Therefore specializing in any techniques of physical therapy will not be enough to treat stroke, so we are in need of integrated approach and objective measurement instrument to adequately evaluate and treat stroke patients.

• 조명전기설비학회논문지
• /
• 제21권7호
• /
• pp.117-123
• /
• 2007

제조업에서 생산설비에 사용되는 중요한 에너지원 중 하나는 전력에너지이며, 에너지 다소비 업종의 생산설비 즉, 플랜트에서는 사용하는 에너지의 절감과 효율 운전은 매우 중요한 관심사항이다. 본 논문에서는 생산 플랜트의 한 공정에서 가장 빈번히 사용되는 유도전동기를 모델로 하여 실제 진단, 계측을 통하여 측정값을 얻고, 기존의 운전 중인 설비들을 고효율 기기로 교체하였을 경우의 경제성을 분석하였다. 이를 위해서 현재 운전 중인 설비와 고효율설비로 교체하였을 경우에 대하여 각각 설비들의 연간 운전비용과 자본회수계수에 의한 연간 투자비용을 계산하였고, 이를 합산한 연간 총 운용비용을 비교하여 고효율설비의 경제적 타당성을 입증하였다.

• 한국직업건강간호학회지
• /
• 제21권2호
• /
• pp.87-97
• /
• 2012

Purpose: This study was to examine the relationship between recovery experience and the burnout among hospital nurses. Methods: A cross-sectional survey design was used. The participants were 281 nurses working at three general hospitals located in Seoul and Gyeonggi Province. The data were collected by convenience sampling using self-reported questionnaires that consisted of general characteristics, burnout, recovery experiences, self-efficacy, social support, job demand and organizational system. The data were analyzed with descriptive statistics, t-test, ANOVA, correlation, and stepwise multiple regression. Results: Stepwise multiple regression showed that organizational system had the greatest impact on hospital nurses' burnout, followed by job demand, self efficacy, position and recovery experience. Conclusion: Recovery experience is found to be a new factor that influences the burnout among hospital nurses. Therefore, further research is needed for confirming that recovery experience influences the burnout of hospital nurses. Also there is a need to develop a program to increase recovery experience from job stress at the organizational level to reduce hospital nurses' burnout.