• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.270-273
• /
• 1994

The capacitive current breaking capability as well as the short circuit current breaking capability is a very important factor in the performance of a circuit breaker. The dielectric recovery capability between poles should be considered in the desist of a circuit breaker because approximately two times of the maximum power system voltage might be applied between poles after the capacitive current be interrupted. The electric field and flow field analyses were utilized in the calculation of dielectric recovery characteristics between poles of 800kV model interrupter. The results show that the separation between moving main contact and moving arcing contact will affect to decrease significantly the electric field strength of a moving arcing contact and an insulation cover, to increase slightly the electric field strength of a fixed arcing contact and to decrease consequently the dielectric recovery capability between poles of the interrupter.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.384-391
• /
• 2001

The insulation strength between contacts after current interruption to the transient recovery voltage i.e., the dielectric recovery strength should be estimated for the evaluation of the small capacitive current interruption capability. Many authors have used theoretical and semi-experimental approaches to evaluate the transient breakdown voltage after the current interruption. Moreover, an empirical equation, which is obtained from a series of tests, has been used to estimated the dielectric recovery strength. Un this paper, the theoretical method which is generated from the streamer theory has been applied to real circuit breakers in order to evaluated the interruption capability. The results of analysis have been compared with the test results and the reliability has been investigated.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.725-731
• /
• 2004

In this study, the three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', 'parallel/exchanged type', and 'parallel/separated type' respectively in this work) were designed and manufactured. This paper presents the tested results of the thermal recovery characteristics on the interrupters using a simplified synthetic test facility. The 'serial type' hybrid interrupter which is to obtain more easily the pressure rise for the thermal recovery compared with the others has the best capability in the thermal recovery characteristics. In order to investigate the stress on the operating mechanism, the distortion of the stroke wave in on-load test was examined to the stroke curve in no-load test. The biggest distortion was occurred in the 'parallel/exchanged type' hybrid interrupter. Finally, the small interruption capability on the three type interrupters was estimated by a theoretical form and the 'parallel/separated type' hybrid interrupter has the advantage of the others in the view of structure.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.3
• /
• pp.73-76
• /
• 2003

In modern EHV (Extra High Voltage) class GCBs (Gas Circuit Breakers), the interruption capability for SLF (Short Line Fault) is one of the most important aspects of performance required for GCBs. Up to now, the SLF interruption capability of EHV class GCBs was partially assisted by the adoption of capacitors able to decrease the dV/dt of the TRV (Transient Recovery Voltage), particularly the TRV on the line side. This paper describes the technique to increase the SLF interruption capability of EHV class GCBs as well as the procedure to develop capacitorless l70kV 50kA GCB.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.349-352
• /
• 1988

In this study, a structured supervisory control for automatic assembly system is developed. And also diagnosis and fault-recovery capability of this supervisory control are discussed. This structured supervisory control is actually applied to Die Bonding Machine and is proved to be useful and to work well.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.538-544
• /
• 2004

This paper presents the interruption capability of serial-hybrid type GCB (gas circuit breaker) compared with that of puffer type. First a puffer type model interrupter which has the stroke length of 80 mm has been designed and manufactured. And also, a serial-hybrid type interrupter which has the same design parameters as the puffer type interrupter except the serially arranged thermal-expansion chamber and puffer cylinder has been fabricated. Using a simplified synthetic test facility, the critical interruption capabilities of the two GCBs have been estimated. The critical di/dt, the critical dV/dt of ITRV (initial transient recovery voltage) and the minimum arcing time of the puffer type model GCB were 10.7 A/${\mu}\textrm{s}$, 5.5 kV/${\mu}\textrm{s}$, and 15.0 ms respectively. In the case of serial-hybrid type model GCB, each of the values was 16.6A/${\mu}\textrm{s}$, 11.5 kV/${\mu}\textrm{s}$ and 13.0 ms. As a conclusion of this work, it has been quantitatively confirmed that the hybrid type interrupter can obtain the sufficient interruption capability at the operating force which is so low that puffer type interrupter has not the interruption capability.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.229-231
• /
• 2001

IPSec is a security protocol suite that provides encryption and authentication services for IP messages at the network layer of the Internet. Key recovery has been the subject of a lot of discussion, of much controversy and of extensive research. Key recovery, however, might be needed at a corporate level, as a from of key management. The basic observation of the present paper is that cryptographic solutions that have been proposed so far completely ignore the communication context. Static systems are put forward fur key recovery at network layer and solutions that require connections with a server are proposed at application layer. We propose example to provide key recovery capability by adding key recovery information to an IP datagram. It is possible to take advantage of the communication environment in order to design key recovery protocols that are better suited and more efficient.

• The Journal of the Korea Contents Association
• /
• v.6 no.6
• /
• pp.56-63
• /
• 2006

Key recovery has been the subject of a lot of discussion, of much controversy and of extensive research. Key recovery, however, might be needed at a corporate level, as a form of key management. The basic observation of the present paper is that cryptographic solutions that have been proposed so far completely ignore the communication context. IPSec is a security protocol suite that provides encryption and authentication services for IP messages at the network layer of the Internet. We propose example to provide key recovery capability by adding key recovery information to an IP datagram. It is possible to take advantage of the communication environment in order to design key recovery protocols that are better suited and more efficient.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.29-39
• /
• 2007

We present an implementation of particle filter algorithm for global localization and kidnap recovery of mobile robot. Firstly, we propose an algorithm for efficient particle initialization using sonar line features. And then, the average likelihood and entropy of normalized weights are used as a quality measure of pose estimation. Finally, we propose an active kidnap recovery by adding new particle set. New and independent particle set can be initialized by monitoring two quality measures. Added particle set can re-estimate the pose of kidnapped robot. Experimental results demonstrate the capability of our global localization and kidnap recovery algorithm.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.76-80
• /
• 2004

This paper describes a load simulator with power-recovery capability, which is based on the voltage source converter-inverter set. The load simulator described in this paper can save the electric energy that should be consumed to test the operation and performance of the distributed generation system and the power quality compensator. The load simulator consists of a converter-inverter set with a DSP controller for system control and PWM pulse generation. The converter operates as a universal load to model the linear load and the non-linear load, while the inverter feed the energy back to the power source with harmonic compensation. The load simulator can be widely used in the lab to test the performance of the distributed generation system and the power quality compensator.