• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.1
• /
• pp.177-186
• /
• 2014

Failure mode and effect analysis (FMEA) is a systematic approach for identifying potential failures before they occur, with the intent to minimize the risk associated with them. It has been widely used in the various manufacturing industries as a solution to reliability problems. As the importance of the service sector is increasing, however, it has been recently extended to some applications in services. Despite these attempts, FMEA cannot be directly applied to the reliability problems in a service industry. Due to the heterogeneity and customer participation in service process, we cannot perfectly prevent service failures. For this reason, we suggest a new risk priority number with three input parameters that consist of severity, probability of occurrence, and recoverability. In this paper, we propose an approach for assessing service risk and service reliability using the service-oriented risk priority number (S-RPN). An example regarding a hypermarket service process is used to demonstrate the proposed approach.

• Steel and Composite Structures
• /
• v.37 no.3
• /
• pp.323-339
• /
• 2020

In steel framed-tube structures (SFTSs), the plastic hinges at beam-ends cannot be adequately improved because of the large cross sections of spandrel beams, which results in the lower ductility and energy dissipation capacities of traditional SFTSs. To address this drawback, high-strength steel fabricated SFTSs with bolted web-connected replaceable shear links (HSFTS-SLs) have been proposed. In this system, shear links use conventional steel and are placed in the middle of the deep spandrel beams to act as energy dissipative components. In this study, 2/3-scaled HSFTS-SL specimens were fabricated, and cyclic loading tests were carried out to study the seismic performance of both specimens. The finite element models (FEMs) of the two specimens were established and the numerical results were compared with the test results. The results showed that the specimens had good ductility and energy dissipation capacities due to the reliable deformation capacities. The specimens presented the expected failure modes. Using a shorter shear link can provide a higher load-carrying capacity and initial elastic lateral stiffness but induces lower ductility and energy dissipation capacity in HSFTS-SLs. The performance of the specimens was comparable to that of the original sub-structure specimens after replacing shear links. Additionally, the expected post-earthquake recoverability and resilience of the structures could be achieved by replacing shear links. The acceptable residual interstory drift that allows for easy replacement of the bolted web-connected shear link was 0.23%. The bolted web-connected shear links had reliable hysteretic responses and deformation capacities. The connection rotation had a notable contribution to total link rotation. The results of the numerical analysis run for the proposed FEMs were consistent with the test results. It showed that the proposed FEMs could be used to investigate the seismic performance of the HSFTS-SL.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.759-767
• /
• 2017

This study investigates the improvement of domestic compression stockings by comparing and analyzing the characteristics of materials and fabrics of medical compression stockings developed in Korea and domestic imported compression stockings. Among imported compression stockings currently available in Korea, three brands with high sales rates are selected by countries (USA, Italy, and Germany) to measure the physical and mechanical properties of the material. Medical compression stockings to be analyzed were selected as M size pantyhose included in 20-30mmHg. As a result, the tensile elongation of medical compression stockings selected in this study was the highest in Korean products in the ankle, while the highest in the US was in the thigh, and the elasticity of Italian products was low. The recovery rate of the kidneys was similar for all four ankles. The ankle weight was the highest except for Korean products that showed the highest weight of the thigh and difference from products of other countries. US product also showed high shape stability due to high recovery of tensile strength from high value RT. Italian products showed low banding and shear values; however, shape stability was poor with good drapeability. In Germany, LT and RT values were low, but clothing comfort was considered excellent. In Korea, LT and RT values, banding and shear characteristics were high, and drapeability was poor. Stiffness was good, but recoverability was excellent.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.359-364
• /
• 2003

The loss of potential opportunity profit which is consisting in the partial markups of the corporation would taking placed in related with the time-delay deeply, has customarily disregarded in contract adjustment under the principles of denial of cost accounting method, declined conjecture in the point of benefits and protection of the law in scope of compensation and the restricted conditions of constant contract. It is being resulted from that the policies of the general principles of accounting standards which is subjected to ask an objective data and evidence, and the denial system as a debt derived from imperfect legal theory applied by current law. Therefore, it is necessitated to find if any irrationality in the positive system is and further to draw an improved reasonable measures to adopt by review of constant system preparing tile reasonableness with the method of suitable quantification devices provided that any time-delay is induced by the party.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.15
• /
• pp.7-31
• /
• 2001

All legal systems set out the principle of full compensation of damages, which aims to fulfil the plaintiff's expectations by putting him into as good a position as he would have been in if the contract had been performed. On the other hand, they place some limitations on the full recoverability of damages for breach of contract. In Civil Law systems, 'fault' is a necessary requirement for liability for damages, and the extent of recoverable damages is directly related to the degree of the dependent's fault. This principle, however, is not adopted by Common Law systems, in which the dependent would be liable in damages for breach of contract even though the breach was not due to his fault. The CISG is in a similar position to the latter systems. In Common Law systems as well as CISG, the extent of liability of the party in breach for damages depends on whether he foresaw or could have foreseen the damages at the time of contracting. Unlike the position in Civil Law systems, foreseeability seems to be the most effective principle to decide the extent. The tests for remoteness centre on reasonable foreseeability or contemplation of the loss. The party in breach is liable even for loss indirectly caused to the other party provided that this loss was foreseeable or contemplated by the party in breach. However, this manner to decide remoteness may lead to unreasonable results in some cases. If the party in breach were the inveterate pessimist who foresaw all sorts of possible damages, he could foresee damages too remote from the breach of duty. If this fact were revealed in the course of trial, he should be liable for such indirect damages. This is really undesirable result. Therefore, as to the remoteness test, the criterion of whether the loss is foreseen or contemplated must not be adopted. Foreseeability by reasonable person must be the only available criterion.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.1
• /
• pp.9-21
• /
• 2018

Survivability of naval vessels is defined as the ability to perform functions and missions in a combat environment. Survivability has close relationship with the spatial layout of naval vessels. In order to maximize survivability, it must be considered from the early stage of design. However the existing concept of survivability was intended to be applied to unit vessels. So it was not suitable for assessment of spatial layout results at the early stage of design. In this paper, a simplified assessment method which can evaluate the spatial layout considering the survivability in the early stage of design has been proposed. For this, assessment layers were defined on survivability components such as susceptibility, vulnerability, and recoverability. Assessment layers of each component were overlapped to deduce a survivability layer of spatial layout alternatives. In addition, the proposed method and optimization algorithm were used to derive optimal spatial layout alternatives considering survivability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.77-83
• /
• 2018

Thermoplastic elastomers are being used increasingly throughout industry owing to their superior properties, such as superior elasticity, formability, and recoverability. Currently, research related to thermoplastic elastomers is focused on the development of composite elastomers by combining with various materials and the development of equipment. On the other hand, in the field of small and medium sized companies, it is necessary to study not only the application of these new materials, but also the process conditions that enable the extrusion of thermoplastic elastomers in inexpensive uniaxial screwing equipment. If extrusion is performed in a single screw extruder, it is important to maintain a uniform thickness through process control of the extruder. This study examined the effects of the processing temperature, which is an extrusion process variable, on the formability of a tube in the thermoplastic elastomer TPE-800L uniaxial extrusion process. The nozzle zone temperature is the most important factor in the extrusion of thermoplastic elastomer TPE-800L; the most excellent moldability was confirmed at $165-170^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.664-665
• /
• 2016

This paper proposes an identification system based on QR (Quick Response) code for production and disposal information of Internet of Things (IoT) devices. Three thousands and five hundreds of electronic devices have replaced and discarded in South Korea in a year, and twenty millions to fifty millions tons of e-wastes have happened throughout the world every year. According to Gartner, market research institution, the number of IoT devices will increase from 2.3 billions in 2013 to 30 billions in 2020, however, the regulations and systems which take into account environment were not prepared. The identification systems for reflecting information of devices, which are produced or discarded, are required to resolve the problem. The proposed identification system based on QR code can store much more massive data such as the producer, product's model, serial number, recycling rate, recovering rate, recyclability rate, recoverability rate than RFID (Radio-Frequency Identification). Also, users can immediately recognize production and disposal information by a QR code application in a smartphone.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.18-23
• /
• 2013

Nylon 12 elastomer was slightly crosslinked in molten state by the addition of small amount of dicumyl peroxide (DCP) as a crosslink agent and triallycyanuate (TAC) as a co-agent during melt compounding at $160^{\circ}C$ in an internal mixer. The effect of the peroxide crosslinking on mechanical, dynamic mechanical and rheological properties of the nylon 12 elastomer was investigated by means of tensile testing, dynamic mechanical analysis (DMA) and small amplitude oscillating rheometer, respectively. With modification, there is an improvement in tensile modulus and Young's modulus with decease in elongation at break. DMA results for peroxide modified nylon 12 elastomers demonstrated that the glass transiaiton temperature of PTMG segment shifted to higher temperature and the storage modulus remained constant above the melting temperature of nylon 12 segments. Melt rheological studies revealed that the peroxide modified nylon 12 elastomer exhibited a more solid like behavior and stronger shear thinning behavior compared to neat nylon 12 elastomer, which was more prominent at higher TAC content in the polymer matrix. The peroxide modified nylon 12 elastomer exhibited good elastic recoverability and improved mechanical properties without sacrificing melt processibilty, and especially the service temperature range increased as compared to neat nylon 12 elastomer.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.441-447
• /
• 2020

In a situation in which around 50 million metric tons of electrical and electronic products is generated globally per year, the total installed base of Internet of Things (IoT) devices is projected to amount to around 75 billion worldwide by 2025. However, there is very little research on identification schemes for end-of-life treatment (EoLT) of IoT devices. To address this issue, this paper proposes new identifiers including EoLT information such as recyclability rate (Rcyc) and recoverability rate (Rcov) of an IoT device, recycling rate (RCR) and recovery rate (RVR) of each part in the IoT device, etc. and implements them by using object identifier (OID), mobile radio frequency identification (RFID) and quick response (QR) code. The implemented OID and mobile RFID can be used with cooperation of a remote server via communication networks and the implemented QR code can be used simply with a smartphone app.