• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.93-99
• /
• 2020

A majority of car crash is affected by careless driving that causes extensive economic and social costs, as well as injuries and fatalities. Thus, the research of precise crash detection systems is very significant issues in automotive safety. A lot of crash detection algorithms have been developed, but the coverage of these algorithms has been limited to few scenarios. Road scenes and situations need to be considered in order to expand the scope of a collision detection system to include a variety of collision modes. The proposed algorithm effectively handles the x, y, and z axes of the sensor, while considering time and suggests a method suitable for various real worlds. To reduce nuisance and false crash detection events, the algorithm discriminated between driving mode and parking mode. The performance of the suggested algorithm was evaluated under various scenarios, and it successfully discriminated between driving and parking modes, and it adjusted crash detection events depending on the real scenario. The proposed algorithm is expected to efficiently manage the space and lifespan of the storage device by allowing the vehicle's black box system to store only necessary crash event's videos.

• 한국통신학회논문지
• /
• 제29권5C호
• /
• pp.716-725
• /
• 2004

본 논문에서는 VHLS 광학판 기반의 새로운 다시점 3D 디스플레이 시스템을 제시하였다. 즉, VHLS 광학판을 체적 홀로그램의 각 다중화 기록 특성을 이용하여 다시점 영상의 방향벡터를 회절격자 형태로 기록한 일종의 광방향 변조기로 제작한 다음, 제작된 VHLS을 LCD 공간광변조기에 부착되어 패널에 입력되는 다시점의 스테레오 영상을 각 시점에 해당하는 특정방향으로 분리해 줌으로써 다시점 3D 디스플레이 시스템을 실현하였다. 또한, 본 논문에서는 VHLS 광학판의 원리와 특성을 분석한 다음 상용 포토폴리머를 이용하여 최적화된 4시점의 VHLS 광학판을 설계 제작하고 이를 이용하여 4시점의 스테레오스코픽 3D 디스플레이 시스템을 구현하였다. 그리고 적응적 변위 추정 알고리즘으로 합성된 4시점의 테스트 영상을 이용한 광학실험을 통해 VHLS 기반의 다시점 3D 디스플레이 시스템의 구현 가능성을 제시하였다.

• 한국음향학회지
• /
• 제38권1호
• /
• pp.128-138
• /
• 2019

본 논문은 서로 다른 두 개의 LOFAR (LOw Frequency Analysis and Recording)그램을 융합하는 방법을 다룬다. 기존의 방법은 주파수 스펙트럼을 이용하여 LOFAR 그램을 융합하기 때문에, 시간-주파수의 2차원 정보인 토널 신호를 융합하는데 제한적인 성능을 갖는다. 제안하는 방법은 전처리 과정에서 2차원 방향성 양방향 필터링을 이용하며, 전처리된 LOFAR 그램의 국부 비등방성 비교를 기반으로 두 LOFAR 그램을 융합한다. 전처리 과정에서 잡음을 억제하고 토널을 부각시키고 나면 국부 비등방성은 토널과 잡음을 구분하기 위한 척도로 사용될 수 있다. 모의 데이터와 해상 데이터를 이용해 LOFAR 그램 융합 실험을 수행한 결과, 제안한 방법은 기존 기법에 비해 융합된 LOFAR 그램의 잡음레벨을 대등하게 하거나 감소시키는 결과를 낳으며, 융합시 토널 누락 현상을 감소시키는 것을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제24권8호
• /
• pp.9-17
• /
• 2019

In this paper, we propose a block mapping technique applicable to NAND flash memory. In order to use the NAND flash memory with the operating system and the file system developed on the basis of the hard disk which is mainly used in the general PC field, it is necessary to use the system software known as the FTL (Flash Translation Layer). FTL overcomes the disadvantage of not being able to overwrite data by using the address mapping table and solves the additional features caused by the physical structure of NAND flash memory. In this paper, we propose a new mapping method based on the block mapping method for efficient use of the NAND flash memory. In the case of the proposed technique, the data modification operation is processed by using a blank page in the existing block without using an additional block for the data modification operation, thereby minimizing the block unit deletion operation in the merging operation. Also, the frequency of occurrence of the sequential write request and random write request Accordingly, by optimally adjusting the ratio of pages for recording data in a block and pages for recording data requested for modification, it is possible to optimize sequential writing and random writing by maximizing the utilization of pages in a block.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.71-80
• /
• 2002

This paper suggests the Cardioid beamforming algorithm of the doublet sensors employing DIFAR (directional frequency analysis and recording) sensor signals in the frequency domain. The algorithm enables target bearing estimation using the signals from directional sensors. The algorithm verifies its applicability by successfully estimating bearings of a target projecting ten narrow-band signals in shallow water. The estimated bearings agree very well with those from GPS (global positioning system) data. Assuming the bearings from GPS data to be real values, the estimation errors are analyzed statistically. The histogram of estimation errors in each frequency have Gaussian shape, the mean and standard deviation dropping in the ranges -1.1°∼ 6.7°and 13.3∼43.6°, respectively. Estimation errors are caused by SNR (signal to noise ratio) degradation due to propagation loss between the source and receiver, daily fluctuating geo-magnetic fields, and non-stationary background noises. If multiple DIFAR systems are employed, in addition to bearing, range information could be estimated and finally localization or tracking of a target is possible.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.361-368
• /
• 2015

This paper deals with a robust fine seek controller design problem with multiple constraints using a genetic algorithm. A robust $H\infty$ constraint is introduced to attenuate effectively velocity disturbance caused by the eccentric rotation of the disk. A weighting function is optimally selected based on the estimation of velocity disturbance and the estimated minimum velocity loop gain. A robust velocity loop constraint is considered to minimize the variances of the velocity loop gain and bandwidth against the uncertainties of fine actuator. Finally, a robust fine seek controller is obtained by solving a genetic algorithm with an LMI condition and an appropriate objective function. The proposed controller design method is applied to the fine seek control system of a DVD recording device and is evaluated through the experimental results.

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.793-798
• /
• 2009

In this paper, the simulation and optimization of SRH (Surface Relief Hologram) masks for printing LCD gate patterns using TIR (Total Internal Reflection) holographic lithography was investigated. A simulation and optimization algorithm based on SDTA (Scalar Diffraction Theory Analysis) method was developed. The accuracy of the algorithm was compared to that of the RCWA (Rigorous Coupled Wave Analysis) method for estimating the Fresnel diffraction pattern of Cr amplitude masks for the given system geometry. In addition, the results from the optimization algorithm were validated experimentally. It was found that one to the most important conditions for the fabrication of SRH masks is to avoid nonlinear shape distortions of the resulting grating. These distortions can be avoided by designing SRH masks with recorded gratings having small aspect ratios of width versus depth. The optimum gap size between the Cr and SRH masks was found using the optimization algorithm. A printed LCD gate pattern with a minimum line width of $1.5{\mu}m$ exposed using the optimized SRH mask was experimentally demonstrated.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.169-184
• /
• 2002

In order to extract bearing information from the directional sensors of DIFAR(directional frequency analysis and recording) that is a kind of passive sonobuoy, the cardioid beamforming algorithm applicable to DIFAR system was studied in the frequency domain. the algorithm uses narrow-band signals propagated though the media from the acoustic sources such as ship machineries. The proposed algorithm is expected to give signal to noise ratio of 6dB when it uses the maximum response axis(MRA) among the Cardioid beams. The estimated bearings agree very well with those from GPS data. Assuming the bearings from GPS data to be real values, the estimation errors are analyzed statistically. The histogram of estimation errors in each frequency have Gaussian shape, the mean and standard deviation dropping in the ranges -1.1~$6.7^{\circ}$ and 13.3~$43.6^{\circ}$, respectively. Estimation errors are caused by SMR degradation due to propagation loss between the source and receiver, daily fluctuating geo-magnetic fields, and non-stationary background noises. If multiple DIFAR systems are employed, in addition to bearing, range information could be estimated and finally localization or tracking of a target is possible.

• 한국음향학회지
• /
• 제39권1호
• /
• pp.38-46
• /
• 2020

로파/데몬 그램은 수동소나의 특성을 확인하기 위해 수중 음향 신호에 대한 방위, 시간, 주파수를 시각적으로 표현한 결과이다. 이러한 그램들은 기존의 압축 기법들을 적용하기 힘든 토널 성분과 같은 특징들을 포함하고 있다. 본 논문에서는 이진맵과 예측 기법으로 구성된 새로운 로파 및 데몬 그램 압축 기법을 제안한다. 먼저 각 주파수 빈에 대한 예측을 결정하는 이진맵을 생성하고, 프레임을 몇 개의 매크로 블록으로 구분한다. 각 매크로 블록에 대해 인트라 예측과 인터 예측을 적용하여 나머지를 계산한다. 그리고 이진맵에서 유효한 빈들에 대해 예측을 수행하고 엔트로피 부호화를 위해 나머지를 양자화 한다. 이진맵과 예측모드를 전송함으로써 복호기는 동일한 절차로 그램을 복원한다. 시뮬레이션을 통해 제안하는 알고리즘의 로파와 데몬 그램 압축 결과가 기존의 데이터 압축 기법에 비해 우수함을 확인한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.289-292
• /
• 2002

This paper provides a frame-layer method for controlling bit rate of compressed video data in real time. Our approach is easy to operate and can store encoded video data in real time without deteriorating the quality of an image. To provide ameliorated and consistent visual quality, a new concept named SOP (Set Of Pictures) and a new quantization parameter variation control algorithm based on a second-order rate-distortion model 〔2〕 are introduced. The total bit-budget is allocated efficiently to cope with unpredictable recording time by using the proposed algorithm and it is distributed to each frame. In the end, we show improved and consistent video quality with experimental results obtained from C-model of a MPEG-4 (simple-profile) encoder.