• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.415-424
• /
• 2016

This paper describes a high data rate proximity transmitter design for high resolution smartphone-mirrored display applications. A 2 Gb/s transmitter is designed with a low transmission power of -70 dBm/MHz and a wide bandwidth of nearly 3 GHz. A digital pre-correction method is employed in the transmitter to mitigate the inter-symbol interference problem. A carrier-based digital pulse shaping and a reconfigurable digital envelope generation methods are employed for robust operation by utilizing 20 phases from a 2 GHz phase-locked loop. A 6.5-9.5 GHz transmitter implemented in 65 nm CMOS achieves the maximum data rate of 2 Gb/s, consuming only 7.6 mW from a 1 V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.291-298
• /
• 2017

In this paper, we derive the achievable degrees of freedom (DoF) for multiple-input multiple-output (MIMO) Z-interference channels (Z-IC) with reconfigurable antennas at the receivers, assuming that channel state information is not available at the transmitters. We propose a new linear scheme to align interfering signals and to decode desired signals through the designed preset mode switching pattern of reconfigurable antennas at the receivers. The key idea of our scheme is to use interfering signals as a side information at the interfered receiver by being silent at the corresponding transmitter during some time slots. Consequently, it is shown that the reconfigurable antennas at the receivers can bring a DoF gain if the number of preset modes is greater than the number of RF chains at the receivers.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.89-94
• /
• 2007

For successful implementation of multi-standard transmitter, reconfigurable architecture and component design are essential. This paper presents a reconfigurable CMOS power amplifier designed CMOS 0.25 um process. Designed power amplifier can be operated at 0.9, 1.2, 1.75, and 1.85 GHz. Also, it can be used at 2.4 GHz by using bonding wire inductor. The interstage matching network is composed of two inductors and four switches, and operation frequency can be varied by controlling switches. Proposed power amplifier can be used as a power amplifier in low power applications such as ZigBee or Bluetooth application and used as a driver amplifier in high power application such as CDMA application. Designed power amplifier has 18.2 dB gain and 10.3 dBm output power at 0.9 GHz. Also, it represented 10.3 (18.1) dB gain and 5.2 (10) dBm output power at 1.75 (2.4) GHz.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.33-48
• /
• 2018

In this paper, we characterise the joint interference alignment and power allocation strategies for a K-user multicell multiple-input multiple-output (MIMO) Gaussian interference channel. We consider a MIMO interference channel with a blind interference alignment through staggered antenna switching on the receiver. We explore the power allocation and the feasibility condition for cooperative cell-edge (CE) mobile users (MUs) by assuming that the channel state information is unknown. The new insight behind the transmission strategy of the proposed scheme is premeditated (randomly generated transmission strategy) and partial cooperative CE MUs, where the transmitter is equipped with a conventional antenna, the receiver is equipped with a reconfigurable multimode antenna (staggered antenna switching pattern), and the receiver switches between preset T modes. Our proposed scheme assists and aligns the desired and interference signals to cancel the common interference signals, since the received signal must have a corresponding independent signal subspace. The sum capacity for a K-user multicell MIMO Gaussian interference channel with reconfigurable multimode antennas is completely characterised.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.329-331
• /
• 2014

A simple realization of an alignment-free wireless power transmission (WPT) system is presented in this letter. The WPT system consists of a transmitter with three reconfigurable modes corresponding to various controllable magnetic field directions in the azimuthal plane and an algorithm for the optimum mode selection carried by sensing the reflected voltage of the system. Twelve light emitting diodes (LEDs) are used to confirm the on- and off-state of LEDs powered wirelessly by the transmitter at every $15^{\circ}$ of the azimuthal plane. A criterion voltage from the reflected power of the system is found by using the correlation between the reflected voltage and the on- and off-state of the LEDs. Simply by continuous; monitoring of the voltage from the system, the system maintains power to the LEDs. The system is realized by MATLAB/Simulink and a National Instrument data acquisition device (DAQ) board. Measurements using the system show on-state LEDs in the azimuthal plane except at the angles of $60^{\circ}$, $75^{\circ}$, $180^{\circ}$, and $300^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.475-483
• /
• 2012

This paper presents new type of the hybrid supply modulator for the next reconfigurable transmitters. The efficiency of the hybrid supply modulator is one of the most important performance. For enhancement the efficiency, multi-switching structure in the hybrid supply modulator is employed. Additionally, input envelope signal sensing stage is employed for implementation multi-mode operation. To compare the performance of the proposed hybrid supply modulator, the conventional hybrid supply modulator is also designed. The measured efficiency of the proposed hybrid supply modulator is 85 %/84 %/79 % for EDGE/WCDMA/LTE signals which have 384 kHz/3.84 MHz/5 MHz bandwidth, respectively. The efficiency of the proposed hybrid supply modulator is higher than the conventional hybrid supply modulator. Therefore, this structure shows good candidate for the reconfigurable transmitters.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.43-48
• /
• 2019

We design a reconfigurable optical node for metropolitan WDM networks, and numerically study the capability of the node in the optical signal level. Unlike a long-haul WDM system, major limitations of metropolitan WDM systems are power loss, fiber dispersion and optical signal-to-noise ratio(OSNR) degradation due to EDFAs. Therefore, we include the behaviors of transmitter and receiver, and fiber, EDFAs, and optical filters(MUX/DeMux) in numerical simulations with varying parameters over wide range. From simulation results, we can identify the maximum span numbers for OC-48 and OC-192 to achieve $BER<10^{-12}$ using the node structure at various received powers and residual dispersions.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.220-226
• /
• 2008

This paper proposes the Reconfigurable Doherty Amplifier(RDA) with asymmetric structure which has ${\lambda}/4$ impedance transformer for modulating the load impedance in peaking amplifier path. This structure is possible to implement a compact size for N-stage multi Doherty amplifier and to get almost same characteristics that is compared to conventional Doherty amplifier. To realize the high efficiency amplifier, we were implemented 45 Watts power amplifier at transmitter band of Wideband Code Division Multiple Access(WCDMA) base-station. As a result, in case of WCDMA 1 Frequency Allocation(FA) input signals, this amplifier has obtained a 26.3% Power Added Efficiency(PAE) at 8 dB back-off point from P1dB and an Adjacent Channel Leakage Power(ACLR) is -40.4 dBc at center frequency ${\pm}5MHz$ deviation.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.667-670
• /
• 2004

In this paper, we have presented the improved IF transceiver architecture and the implementation and experimental results on re-configurable transceiver based on digital IF for multiple wideband OFDM/TDD base stations for high-speed portable internet-service in which is issued Korea. The implemented IF transceiver has been designed to support multiple frequency allocations and multiple standards by only modifying the programmable software not its hardware like as the software-defined-radio concept. Also, the digital complex quadrature modulation technique has been used for the digital IF transmitter, which is able to combine multiple frequency bands in digital processing block not RF block and to reject the image frequency signals. And the bandpass sampling technique has been used for the digital IF receiver to reduce the sampling rate of ADC. This paper has shown the experiment results on the frequency response and constellation on the base-station implemented using the modified IEEE 802.16a/e physical layer channel structure based on OFDM/TDD.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.199-205
• /
• 2016

We present a novel schematic using a 3-dB coupler to transmit radiofrequency (RF) power to two receivers selectively. Whereas previous multiple receiver supporting schemes used hardware-switched methods, our scheme uses a soft power-allocating method, which has the advantage of variable power allocation in real time to each receiver. Using our scheme, we can split the charging area and focus the RF power on the targeted areas. We present our soft power-allocating method in three main points. First, we propose a new power distribution hardware structure using a FPGA (field-programmable gate array) and a 3-dB coupler. It can reconfigure the transmitting power to two receivers selectively using accurate FPGA-controlled signals with the aid of software. Second, we propose a power control method in our platform. We can variably control the total power of transmitter using the DC bias of the drain input of the amplifier. Third, we provide the possibility of expansion in multiple systems by extending these two wireless power transfer systems. We believe that this method is a new approach to controlling power amplifier output softly to support multiple receivers.