• 설비공학논문집
• /
• 제12권1호
• /
• pp.12-19
• /
• 2000

The multi type heat pump system may provide more energy savings and better environmental conditions than the single type heat pump system may do. In order to design a multi type heat pump system, it may be recommended to develop the system simulation program, which can predict the characteristics of the system such as unit capacities, power consumptions, and system COP's. In this study, the steady state simulation program of the multi type heat pump system was developed. The results from the simulation program were compared with those from the experimental tests which were performed in the environmental chamber, Cooling tests show 3.11% and 0.94% of error in capacity and COP, and heating tests show 3.30% and 1.90% of error in capacity and COP, respectively. Therefore, the steady state simulation program developed for this study can effectively be used for the design and the performance prediction of the multi type heat pump system.

• 전자공학회논문지C
• /
• 제35C권5호
• /
• pp.17-24
• /
• 1998

In this paper, we suggested and verified the effective traffic information transfer methods using the GPS (Global positioning system) and voice broadcasting. We suggested four traffic information selection methods with their testing algorithms. A traffic information transfer simulation system is developed for testing the recommended methods. In the result, we compared and analyzed efficiency of suggested methods.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권4호
• /
• pp.63-85
• /
• 2017

Purpose Recently, much attention in building smart factory has dramatically increased with an emergence of the Industry 4.0. As we noted a connectivity gap between main concerns of MIS and the automated manufacturing systems such as POP and MES, it is recommended that CPS (Cyber-Physical System) can be an important building block for the smart factory and enrich the depth of MIS knowledge. Therefore, first, this study attempted to identify the connectivity gap between the traditional field of MIS (ERP, SCM, CRM, etc.) and the automated manufacturing systems, and then recommended CPS as a technical bridge to fill the gap. Secondly, we studied concepts and research trend of CPS that is believed to be a virtual mechanism to manage manufacturing systems in an integrated manner. Finally, we suggested research and educational opportunities in MIS based on the CPS perspectives. Design/methodology/approach Since this paper introduced relatively new idea of CPS originally discussed in the field of engineering, traditional MIS research method such as survey and experiment may not fit well. Therefore this research collected technical cases through literature survey in engineering fields, video clips from Youtube, and field references from various ICT Exhibitions and Conventions. Then we analyzed and reorganized them to highlight the necessity of CPS and draw some insight to share with MIS academia. Findings This paper introduced CPS to bridge the connectivity gap between the traditional MIS and automated manufacturing system (smart factory), a concern far away from the MIS academia. Further, this paper suggested future research subjects of MIS such as developing software to share big production data and systems to support manufacturing decisions, and innovating MIS curricula including smart and intelligent manufacturing technology within the context of traditional enterprise systems.

• 한국농공학회지
• /
• 제42권4호
• /
• pp.96-105
• /
• 2000

Field experiment was performed from August 1996 to December 1999 to examine the performance of constructed wetland system for wastewater treatment in rural area. The constructed wetland system was installed in Konkuk University and the effluent from septic tank of school building was used as an influent to the treatment basin. The treatment basin was composed of sand bed with planted reed. From August 1996 to June 1998 the hydraulic loading rate was fixed with about 15.63cm/day and theoretical detention time was 1.38 days, and from July 1998 to December 1999 the hydraulic loading rate was about 6.25cm/day and theoretical detention time was 3.5days. It worked continuously even during winter time, and the sewage flowed without freezing even when average daily air temperature was below -1$0^{\circ}C$. Average removal rate of BOD , COD, and SS was about 70%, T-P removal rate was about 50.8% , and T-N removal rate was 23.9%. The reason for poor T-N removal might be due to high influent concentration and short retention times. At the later years BOD and COD removal rates were increased , and SS and T-P removal rates did not change significantly , but T-N removal rates were decreased. The effluent of the wetland system often effluent water quality standards for sewage treatment plant, therefore, further treatment would be required if the effluent need to be discharged to the public water. Wetland system involves relatively large land area and could be suitable for rural area. Therefore, utilization of reclaimed sewage for agricultural purpose or subsequent land treatment is recommended as a ultimate disposal of sewage for agricultural purpose or subsequent land treatment is recommended as a ultimate disposal of sewage in rural area.

• Archives of Plastic Surgery
• /
• 제42권3호
• /
• pp.365-367
• /
• 2015

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.211-217
• /
• 2016

Most nuclear power plants now utilize solid grounded low voltage systems. For safety and reliability reasons, the low voltage (LV) high resistance grounding (HRG) system is also increasingly used in the pulp and paper, petroleum and chemical, and semiconductor industries. Fault detection is easiest and fastest with a solidly grounded system. However, a solidly grounded system has many limitations such as severe fault damage, poor reliability on essential circuits, and electrical noise caused by the high magnitude of ground fault currents. This paper will briefly address the strengths and weaknesses of LV grounding systems. An example of a low voltage HRG system in the LV system of a nuclear power plant will be presented. The HRG system is highly recommended for LV systems of nuclear power plants if sufficient considerations are provided to prevent nuisance tripping of ground fault relays and to avoid the deterioration of system reliability.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권4호
• /
• pp.47-54
• /
• 2001

The simulation program which can predict major performances of the multi-type heat pump system was developed. In order to verify the simulation program, several experimental tests were performed under various recommended conditions. The experimental results show in good agreement with simulation results. The verified simulation program was used to analyze the system performance. The capacities and the COP＇s under the various indoor and outdoor conditions were predicted. Therefore, it may be concluded that the system simulation program developed in this study may be effectively used for the system design and the performance prediction of the multi-type heat pump system.

• 대한산업공학회지
• /
• 제20권3호
• /
• pp.125-137
• /
• 1994

Manufacturing environs constantly change, and any efficient software system to be used in manufacturing must be able to adapt to the varying situations. In a CAPP (Computer-Aided Process Planning) system, a learning capability is necessary for the CAPP system to do change along with the manufacturing system. Unfortunately only a few CAPP systems currently possess learning capabilities. This research aims at the development of a learning system which can increase the knowledge in a CAPP system. A part in the system is represented by frames and described interactively. The process information and process planning logic is represented using a decision tree. The knowledge expansion is carried out through an interactive expansion of the decision tree according to human advice. Algorithms for decision tree modification are developed. A path can be recommended for an unknown part of limited scope. The processes are selected according to the criterion such as minimum time or minimum cost. The decision tree, and the process planning and learning procedures are formally defined.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.372-378
• /
• 2005

To enhance educational effect for exhaust ventilation system, more instructive educational engineering such as experimental system should be needed. This study was performed to 1) manufacture the basic experimental system for local exhaust ventilation, 2) experiment with this system and 3) develop methodology of exhaust ventilation education. With this system, three pressures (static pressure(SP), velocity pressure(VP) and total pressure(TP)) were measured and illustrated and the graphic shapes agreed to theoretical ones relatively. Entry loss factor ($F_h$) of each hood was found to be different with hood shape, duct velocity and flow rate. This result implies that precise $F_h$ should be determined case by case and a industrial hygienist should not be dependent on the existing values. Pressure loss using velocity pressure method and characteristics of air movement near hoods using fume were grasped with this system. But larger system should be recommended to produce more precise experimental results.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.22-33
• /
• 2014

This study is to diagnose the present superintendent election and education standing committee system for improvement based upon Constitutional values of local education system. The findings are the followings. To improve the election system of superintendent it is recommended to maintain present election system rather than change it drastically since the present system ensure relatively more autonomy, expertise, and political neutrality of local education system. However, the qualification such as years of educational experiences of superintendent candidates need to be restored. Regarding education standing committee it suggest that all or at least 2/3 members need to be educational representatives rather than general representatives. For superintendent as well as education standing committee election, it needs to elaborate the vote ballet such as change of candidates name order by voting place to reduce its effects to election results. It also needs to strengthen public management of election such as expenses and TV forums among candidates.