• 오토저널
• /
• 제15권3호
• /
• pp.111-119
• /
• 1993

In this study, the transient impact structural stress analysis of tracked vehicle structures under recoil impact load is investigated. ANSYS, ABAQUS Code are used for modelling and analytical procedures. The highest maximum Tresca stress occurs on race ring portion and its stress level is (.sigma.$_{T}$)$_{max}$ =20-40kgf/m $m^{2}$. The second highest stress occurs on upper plate of chassis and down plate of turret. The maximum stress level increases with loading direction and elevation angle. The results from liner static load analysis are very much different with impact analysis. Therefore, the practical solutions of structures under impact load can be obtained by only nonlinear transient impact analysis. The impact stress analysis of the steel vehicle structures is conducted. The maximum stress level is less than (.sigma.$_T/)$_{max}$m $m^{2}$. So, the design concept of steel structures can be adapted for new alternatives.s.s.s..s.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.359-365
• /
• 2012

In the soft recoil system, the recoiling parts are initially accelerated to the forward direction. These parts are returned to original position by the firing with intial acceleration speed. The latch of the soft recoil system keeps the high impact load when the recoil parts were recuperated to the forward direction. In this study, the latch of soft recoil system using the ADAMS program was analyzed. The optimal operation parameters were found that max. angle and expansion length of latch was $50^{\circ}$, 180 mm respectively. Dynamic structural analyses of model cases were performed using finite element model. The max. stress and deflection of latch was 230 MPa and 0.45 mm respectively.

• 전산구조공학
• /
• 제10권3호
• /
• pp.145-155
• /
• 1997

본 연구에서는 ANSYS와 ABAQUS 상용 유한요소 코드를 이용하여 궤도차량의 정적.동적 해석을 충격하중과 주행하중에 대해서 수행하였다. 궤도차량이 충격하중을 받을 때 최대 동적 Von Mises응력은 상판의 빔보강재와 레이스링사이에서 발생하였으며 응력수준은 390-450MPa이다. 정하중에 대한 동하중수 1.6을 고려했을 경우 동적 해석과 동적하중계수가 포함된 정하중 해석은 유사한 결과를 보이고 있다. 과도응력은 주로 레이싱링 주위에서 발생하고 있다. 주행하중의 경우 최대응력은 로드휠 유기압 현가장치 #1번에서 450MPa정도이며, 정적해석과 비선형 해석의 결과가 유사하다.