• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.183-189
• /
• 2019

The driver seat of an automobile is in direct contact with the driver and provides the driver with a safe and comfortable ride. The seat consists of a frame, a rail, and many recliners. In recent years, strength and operating force measurement testing of the recliner have become vital for designing car seats. However, performance evaluation requires expensive testing equipment, numerous seat products, and considerable time. Therefore, the trend is to reduce experimentation through interpretation. This study examines the lubrication of solid lubricant for automotive seat recliners and confirms the friction and wear performance. In this study, the lubrication behavior of solid lubricants for car seat recliners is investigated to ascertain the friction and wear performance and to provide accurate values for the strength analysis. The friction material consists of a pin and a plate made from steel, which is widely used in recliners. The friction and wear under lubrication conditions are measured by a reciprocating friction wear tester. The friction coefficient is obtained according to the load and speed. Based on the obtained results, it is possible to achieve a reduction in the error of the test value and the analysis by providing the friction coefficient and wear of the lubricant. The results can be applied to the analysis of automobile seat design.

• Journal of Drive and Control
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2016

Typically, the seat of an automotive vehicle generally includes a horizontal seat-cushion portion and a vertical seat-back portion that is operatively connected to the seat-cushion portion. The seat may include a recliner for the reclining of the seat-back portion relative to the seat-cushion portion by the seat occupant. An energy absorber or damper can also be provided for the seat-back portion. Because the recliner is configured to be released at a relatively high speed, and it results in an impact at the end of a folding stroke, the damper needs to dissipate energy as the seat back moves with respect to the seat cushion; therefore, the role of the seat damper in the automotive-seat design is important. In this paper, the mechanism of an hydraulic-type automotive-seat damper is investigated, and the torque characteristic is simulated according to the design-parameter variations such as the orifice area and the working-fluid properties.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.205-212
• /
• 2003

This paper may provide a basic design data for the safer car seat mechanism and the quality of the material used by finding out the passenger's dynamic behavior when protected by seat belt during collision. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the seat is constructed using CAD program. The formation of a finite element from a geometric data of the seat is carried out using Hyper-Mesh that is the commercial software for mesh generation and post processing. In addition to seat modeling, the finite element model of seat belt and dummy is formed using the same software. Rear impact analysis is accomplished using Pam-Crash with crash pulse. The part of the recliner and right frame is under big stress in rear crash analysis because the acceleration force is exerted on the back of the seat by dummy. The stress condition of the part of the bracket is checked as well because it is considered as an important variable on the seat design. Front impact model which including dummy and seal belt is analyzed. A Part of anchor buckle of seat frame has high stress distribution because of retraction force due to forward motion of dummy at the moment of collision. On the basis of the analysis result, remodeling and reanalysis works had been repeatedly done until a satisfactory result is obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.125-126
• /
• 2012

• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.60-64
• /
• 2011

Computer-aided engineering (CAE) is the broad usage of computer software to aid in engineering tasks. It includes computer-aided design (CAD), computer-aided analysis (CAA), computer-integrated manufacturing (CIM), computer-aided manufacturing (CAM), material requirements planning (MRP), and computer-aided planning (CAP). In this study, the stress of mold analyzed using CAE technique. Punch loads were same difference between 0.5 % and 1.0 % of clearance, but punch load was decreased according to increasing of clearance. Punch load of pre-piercing process worked a little smaller than piercing process. Therefore, the hole of fine blanking process is also more efficient to manufacture the true size after pre-piercing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.241-247
• /
• 1999

This study presents the structural analysis of car a seat frame by the finite element method. The load-deformation characteristics of seat frame are simulated according to the test requirements by FMVSS. Three dimensional modeling technique is applied to the components of the seat frame. The shell, solid , gap and rigid elements are employed to model the car seat frame assembly. Numerical results show that the recliner and kunckle plate are identified as the possible weak part of frame, and the results are well consistent with the experimental static load test. The current analysis model can provide useful informations to design a new car seat and can reduce the overall design cost and time.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.824-827
• /
• 2011

본 논문에서는 자동차 시트 리클라이너 기어의 파인 블랭킹 성형 실험을 통하여 V-링 설치 위치에 따른 기어의 다이 롤 높이 변화를 검토하였다. 3 종류의 다이 편과 가이드 플레이트 편을 설계하여 파인 블랭킹 금형을 제작하였으며 650 ton 파인블랭킹 프레스에서 성형 실험을 수행하였다. 실험으로부터 제품을 취출하여 다이 롤 높이를 측정하여 분석한 결과 기어 모듈과 관계없이 V-링 설치 위치가 가이드 플레이트에서 멀어짐에 따라 다이 롤 높이가 증가함을 파악할 수 있었다. 이와 같은 결과는 향후 파인 블랭킹 금형의 V-링을 설계할 때 다이 롤 높이를 최소화하기 위하여 유용하게 활용될 수 있을 것이다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.128-133
• /
• 2014

In this study, Two kinds of pad models with different configurations as the part of brake system are investigated by structural and fatigue analyses. As the maximum equivalent stress of model 2 becomes higher to the extent of 60% than that of model 1, model 2 can endure more load than model 1. In cases of two kinds of models, the maximum fatigue life at 'Sample history' becomes longer 60 times than 'SAE bracket history' and this life in case of 'SAE transmission' becomes longer 3.5 times than the case of 'SAE bracket history'. Maximum fatigue damages in cases of 'SAE bracket history', 'SAE transmission' and 'Sample history' at model 1 become higher than model 2. Model 2 is thought to have more fatigue durability than model 1. These study results can be effectively utilized with the design of brake pad by anticipating and investigating prevention and durability against its fatigue damage.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.1
• /
• pp.74-78
• /
• 2015

A bus seat is required to be ergonomically designed in terms of its shape and physical properties to increase seating comfort. The present study is intended to develop a systematic bus seat evaluation protocol based on seating comfort. A total of 48 participants evaluated 12 parts (seat belt, recliner, armrest, headrest, upper-back support, lumbar support, seatback bolster, seatback overall, hip support, thigh support, seatpan bolster, and seatpan overall) of 12 bus seats with 17 subjective comfort measures (e.g., convenience of control, suitability of size, and overall comfort). Lastly, ergonomic features of shape and physical properties of each seat part were identified based on the subject evaluation analysis results. The developed bus seat evaluation protocol can be applied to evaluate various types of seats.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.86-94
• /
• 2003

Certified e-mail system guarantees that recipient will get mail content if and only if mall originator receives a receipt. Unlike previous schemes, Optimistic protocols recently published generate a receipt when it meets the condition that the mail content can be accessed by recliner at any time. So originator cannot assure the delivery of e-mail although he can get a receipt. In this paper, we show some flaws in optimistic protocols and propose improved schemes using delivery deadline. Modified protocols guarantee proof-of-receipt and eliminate the problem mentioned above. Furthermore, proposed modification technique can be applicable to most optimistic protocols and is efficient in the sense that modified schemes do not increase the number of messages.