• 한국양식학회지
• /
• 제6권4호
• /
• pp.311-321
• /
• 1993

Ammonia accumulation is regarded as the limiting factor of the first priority in water qualities of aquatic culture systems. Nitrification efficiency and characteristics in seawater were evaluated using Rotating Biological Contactor (RBC) process as a part of the recycling water treatment facilities for marine fish culture system. Ammonia removal efficiency regarded 99.7 to $83.7\%$ at the ammonia surface loading rates of 48 to $393 mg/m^2$ -day. RBC process was able to withstand to the fluctuation of influent ammonia concentrations and loading and produced the stable effluent. The mathematical model on the fixed-film biological reactor developed by Kornegay seemed to be suitable to RBC process kinetic evaluation for the recycling water treatment of the marine fish culture system. Area capacity constant (P) and half-velocity constant (Ks) in the model were 0.188g/m^2$-day and 1.25mg/l, respectively.

• 수산해양교육연구
• /
• 제29권2호
• /
• pp.586-592
• /
• 2017

This study analyzed the effect of four control factors, RPM, load, EGR rate and cooling water temperature on the exhaust emissions of the small DI diesel engine. The amount of NOx and smoke emissions were measured through experiments for three levels of four control factors according to orthogonal array table, and the effect of four factors on NOx and smoke emissions was analyzed quantitatively. The main results obtained in this study are summarized as follows: 1. RPM, load and EGR rate have a great influence on NOx and smoke emissions, and the effect of cooling water temperature is negligible. 2. As RPM and load increases NOx emission increases and decreases sharply as the EGR rate increases. 3. Smoke emission decreases or increases randomly according to RPM and load, but increases sharply in proportion to the EGR rate. 4. EGR rate has the greatest effect on NOx and smoke emissions by more than 60% of contribution to variance, especially in the case of NOx emission, EGR rate represents a significant result even under the confidence level of 99% on ANOVA.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.359-370
• /
• 2023

The thermal integrity of spent nuclear fuels has to be maintained during their long-term dry storage. The detailed temperature distributions of spent fuel assemblies are essential for evaluating the integrity of their dry storage systems. In this study, a subchannel analysis model was developed for a canister of a single fuel assembly using the COBRA-SFS code. The thermal parameters affecting the peak cladding temperature (PCT) of the spent fuel assembly were identified, and sensitivity analyses were performed based on these parameters. The subchannel analysis results indicated the presence of a recirculation flow, based on natural convection, between the fuel assembly and downcomer region. The sensitivity analysis of the thermal parameters indicated that the PCT was affected by the emissivity of the fuel cladding and basket, convective heat transfer coefficient, and thermal conductivity of the fluid. However, the effects of the wall friction factor of the canister, form loss coefficient of the grid spacers, and thermal conductivities of the solid materials, on the PCT were predominantly ignored.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1070_1071
• /
• 2009

Recently, small hydropower attracts attention because of its clean, renewable and abundant energy resources to develop. Therefore, a cross-flow hydraulic turbine is proposed for small hydropower development in this study. The turbine‘s simple structure and high possibility of applying to the sites of relatively low effective head and large flow rate can be advantages for the introduction of the small hydropower development. The purpose of this study is not only to investigate the effects of air layer in the turbine chamber on the performance and internal flow of the cross-flow turbine, but also to suggest a newly developed air supply method. CFD analysis for the performance and internal flow of the turbine is conducted by an unsteady state calculation using a two-phase flow model in order to embody the air layer effect on the turbine performance effectively. The result shows that air layer effect on the performance of the turbine is considerable. The air layer located in the turbine runner passage plays the role of preventing a shock loss in the runner axis and suppressing a recirculation flow in the runner. The location of air suction hole on the chamber wall is very important factor for the performance improvement. Moreover, the ratio between air from suction pipe and water from turbine inlet is also significant factor of the turbine performance.

• 한국습지학회지
• /
• 제18권1호
• /
• pp.68-75
• /
• 2016

본 연구에서는 습지에 널리 적용되는 혼합토양이나 자갈여재 대신 공극율이 90% 이상으로 매우 커서 공극폐색의 염려가 적은 합성섬유를 대체여재로 적용한 수직 흐름형 컬럼습지를 제작하여 서로 다른 수리학적 체류시간, 내부순환빈도 및 오염 부하량 조건에서 축산지역 인공 강우유출수 처리시험을 수행하였다. 모든 습지에서 TSS 제거효율은 94~96%, COD 68~73%, TN 35~58% 이었다. 체류시간 등의 운전인자가 TSS와 COD 제거에 미치는 영향은 미미하였다. 그러나 질소의 경우 부하량과 체류시간, 내부순환빈도가 증가할수록 효율이 증가하였다. 특히 운전기간 동안 합성섬유의 생물학적 분해작용으로 인하여 유기물질이 다량 용출되었으며 탈질을 위한 내부공급 탄소원으로 기여하는 것으로 밝혀졌다. 그러나 용출기간은 40일 정도 지속되었으므로 그 효과는 매우 제한적이었다. 습지 내부충진 여재로서 합성섬유가 갖는 장점은 가벼우므로 구조체의 시공에 소요되는 비용을 저감할 수 있고, 비표면적이 크고 습지수명을 연장할 수 있다는 점이다.

• 한국수소및신에너지학회논문집
• /
• 제30권1호
• /
• pp.21-28
• /
• 2019

Reversible solid oxide fuel cell (ReSOC) system was integrated with waste steam for electrical energy storage in distributed energy storage application. Waste steam was utilized as external heat in SOEC mode for higher hydrogen production efficiency. Three system configurations were analyzed to evaluate techno-economic performance. The first system is a simple configuration to minimize the cost of balance of plant. The second system is the more complicated configuration with heat recovery steam generator (HRSG). The third system is featured with HRSG and fuel recirculation by blower. Lumped models were used for system performance analyses. The ReSOC stack was characterized by applying area specific resistance value at fixed operating pressure and temperature. In economical assessment, the levelized costs of energy storage (LCOS) were calculated for three system configurations based on capital investment. The system lifetime was assumed 20 years with ReSOC stack replaced every 5 years, inflation rate of 2%, and capacity factor of 80%. The results showed that the exergy round-trip efficiency of system 1, 2, 3 were 47.9%, 48.8%, and 52.8% respectively. The high round-trip efficiency of third system compared to others is attributed to the remarkable reduction in steam requirement and hydrogen compression power owning to fuel recirculation. The result from economic calculation showed that the LCOS values of system 1, 2, 3 were 3.46 ¢/kWh, 3.43 ¢/kWh, and 3.14 ¢/kWh, respectively. Even though the systems 2 and 3 have expensive HRSG, they showed higher round-trip efficiencies and significant reduction in boiler and hydrogen compressor cost.

• 유기물자원화
• /
• 제32권2호
• /
• pp.37-48
• /
• 2024

하수처리장은 공공부문 온실가스 목표 관리제 대상 시설로 탄소 배출량 감축이 시급하다. 하지만 최근 하수도 통계에 의하면 하수처리량에 대한 CO₂ 배출량은 2020년 대비 3.03 % 감소하였으며 이는 국가 온실가스 감축목표(NDC)를 충족하기에는 상당히 부족한 수치이다. 생물반응조에서 발생하는 직접 배출 온실가스와 하수처리과정에서 이용되는 에너지로 인한 간접배출 온실가스 두 가지를 모두 고려한 총 CFP (Carbon Footprint)를 최소화하는 생물반응조 운전 조건을 찾기 위해 EQPS라는 시뮬레이션 프로그램을 이용하여 연구를 수행하였다. 4-stage BNR 공법 하수처리장 생물반응조 내부반송율을 유입 수량의 100 %로 설정했을 때 총 CFP가 설계 운전 조건 대비 약 10.97 % 감소함을 확인하였다. 또한 대상 처리장의 N₂O EF(Emission Factor)를 계산한 결과 0.138~0.199 %로 IPCC에서 제시한 기본값 1.6 %보다 낮은 값임을 파악하였다. 본 연구는 생물반응조 운전 조건 최적화를 통해 하수처리시설의 총 CFP를 최소화하는 방안을 제시하며, N₂O 배출 감소를 위한 추가 연구의 필요성을 강조하고 있다.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.323-329
• /
• 2000

막결합형 활성슬러지 공정은 막오염으로 인한 플럭스 감소 때문에 시스템의 경제성과 효율성이 떨어지는 문제점을 지니고 있어 막오염에 대한 체계적인 연구가 요구되고 있다. 따라서 본 연구에서는 한외여과막과 결합된 활성슬러지 시스템을 운영하면서 막오염 유발 인자를 규명하고자 하였다. 활성슬러지 공정의 운전 초기에 급격한 플록 크기 감소와 동시에 급격한 플럭스 감소가 관찰되었다. 초기 플럭스 감소현상은 활성슬러지 플록의 입자 크기 감소로 인한 케이크 저항의 증가가 주요 원인이었다. 이것은 운전시간에 따른 각 여과 저항값을 측정하여 확인하였다. 또한, 플록 해체로 인하여 EPS 양이 운전 전보다 약 150 % 가량 증가한 것을 볼 때 EPS 양의 증가가 케이크 저항 증가의 또 다른 원인이 될 수 있음을 제시하였다.

• 한국환경보건학회지
• /
• 제22권1호
• /
• pp.45-50
• /
• 1996

The application of HACCP system, which was adopted by Codex Alimentarius Committee for the safe meat and poultry production, is one of the urgent task for competing in the world trade markets. But there have been no useful analytical studies to identify the causes of contamination in the poultry meat processing plants in Korea. This study was conducted to investigate the potential hazards during the operations by the microbiological examination for the poultry meat processing plant (20,000 birds capacity a day) located in Kangwon province. In spite of air contamination of work places, it may not directly affect the surface contamination of poultry meats. But the risk of Campylobacter jejuni/coli contamination was high. The number of total count was decreased about ten times, but remarkable changes of microbial contamination could not be recognized in each procedure during the operations. The washing water was already contaminated as much as $10^{3-6}CFU/ml$ in SPC before the operations. It means that to keep water tanks hygienic is a primary step to prevent the occurrences of microbial contamination. The overflow and recirculation of water in scalding, washing, and chilling was aslo an important factor for a hygienic control. Based on this study, the followings could be regarded as an important factors for hygenic control in the poultry slaughtering plants on a small scale. The temperature of water used for scalding should be constantly maintained on a required temperature, and the overflow rate of 1~1.5 liter per bird. The carcass surface and the body cavity should be washed thoroughly and the cross-contamination due to facilities, workers, and tools should be prevented. The chilling water sholud be maintained under 5$\circ$C of temperature with ice and overflow, and residual chlorine level of 50 ppm.

• 대한기계학회논문집B
• /
• 제41권3호
• /
• pp.161-169
• /
• 2017

터빈 블레이드의 내부냉각 설계 강화를 위해 설치된 경사요철과 가이드 베인에 대한 연구를 진행하였다. 채널의 입구로 들어오는 공기와 요철이 만나는 각도를 기준으로, 서로 상반된 두 가지 요철배열을 전연면과 후연면에 평행하게 배치하였다. 채널의 종횡비(AR)는 5:1이고, 요철의 각도는 $60^{\circ}$, 요철의 높이와 요철간 간격 비($e/D_h$)는 0.075이다. 레이놀즈 수는 10,000으로 고정하였다. 요철배열에 따른 2차 유동과 딘 와류의 상호작용이 곡관부와 전체 채널의 열전달 결과와 유동특성에 어떠한 영향을 미치는지 확인할 수 있었다. 결론적으로 첫 번째 유로의 요철배열이 팁 면의 열전달 분포에 지배적인 요인이며, 곡관부에서 유동의 분포에도 영향을 미쳤다. 또한 U자 형상 가이드 베인을 사용하였을 때 모든 요철에서 팁 면의 열전달 값이 상승하였으며, 특히 공기와 요철의 충돌각도가 양의각도일 때 가장 높은 냉각성능계수를 보였다.