• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.26-33
• /
• 2003

Recess is a geometrical configuration shape that the exit surface of an inner injector is located at a certain length inward from that of an outer injector. It is known to have the characteristics that it can augment mixing efficiency and flame stabilization through internal mixing of propellant in it. So, various experiments, such as backlit stroboscopic photography, phase Doppler particle analyzer(PDPA) and mechanical patternator, were performed at several recess lengths to grasp its effect on the spray characteristics of spray angle, breakup length, atomization and' mixing. Recess length was normalized to dimensionless recess number and two principal mechanisms of impingement and swirl recovery were introduced to explain its influence on the spray characteristics. The effect of recess on SMD doesn't appear significantly near the recess number where mixing efficiency attains to the maximum, whereas mass distribution and mixing efficiency are changed considerably. Thus, it can be inferred that a certain optimum recess number exists, where mixing efficiency becomes the maximum.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.451-454
• /
• 2006

This paper describes the results of cold flow test and hot firing tests of an uni-element coaxial swirl injector and hot firing tests of a subscale combustor, as to the development effort of coaxial swirl injector for high performance liquid rocket engine combustor. A major design parameter for coaxial swirl injector is the recess number of a bi-swirl injector. The results of hot firing tests of the uni-element injector combustor and the sub-scale combustor are analyzed to investigate the effect of the recess number influencing on the combustion performance and pressure fluctuation. The test results of a cold flow test of the unielement combustor shows that it was shown that the change in recess number has significant effect on mixing characteristics and efficiency, while the effect of recess number on atomization characteristic is not The results of a series of firing tests using unielement and subscale combustor show that the recess length significantly affects the hydraulic characteristics, the combustion efficiency, and the dynamics of the liquid oxygen/kerosene bi-swirl injector. As a point of combustion performance, combustion efficiencies are 90% for unielement combustor and 95% for subscale combustor. The difference in the characteristic velocities between the unielement combustor and the subscale combustor may be caused by the difference in thermal loss to the combustor wall and the relative lengths of the combustion chamber. For a mixed type coaxial swirl combustor, the pressure drop across the injector increases as recess number becomes larger. The low frequency pressure fluctuation observed in unielement combustor can be related to the propellant mixing characteristics of the coaxial bi-swirl injector. The effect of the recess number on the pressure fluctuation inside the combustion chamber is more significant in un i-element combustor than the subscale combustor, of which the phenomena are also observed in time domain and frequency domain.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.30-37
• /
• 2003

Swirl 인젝터는 유체가 접선방향의 주입구를 통해 주입되어 인젝터 내부에서 접선방향 속도와 축방향 속도를 갖고 흐르다 노즐에서는 속도성분비에 의해 결정된 분산각에 따라 흐른다. 이러한 분산각은 특히 이중 swirl 인젝터에서 두 유체가 분무되어 서로 간섭을 주고 특히 recess가 있는 경우 내부 혼합 등의 이유로 예측이 어렵다. 이러한 분산각 현상을 recess 길이별로 실험을 통하여 규명하고 또한 상용 열수력 해석 코드인 FLUENT Version6.0을 사용하여 수치해석하였다. 다상유동 해석 모델중 VOF (Volume Of Fluid)모델을 사용하여 모사하고 실험결과와 비교하여 적용 타당성을 확인하였으며, recess가 단독 분사시와 혼합 분사시 분산각에 미치는 영향에 대하여 분석하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2002년도 제19회 학술발표대회 논문초록집
• /
• pp.12-12
• /
• 2002

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.704-708
• /
• 2017

A spray characteristics is carried out in a numerical simulation of swirl coaxial injector. The water and nitrogen are the oxidizer and fuel is used in cold flow condition. The simulation is carried out in 3d model with varying recess length. Reynolds stress turbulence and volume of fluid model were chosen to perform the simulation. The spray characteristics have been investigated as well as the influence of the inlet swirl strength of the internal flow. Effect of recess length is studied for the axial and radial velocity decreased with a reduced length of inner injector due to the decline vortex intensity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.163-166
• /
• 2004

모바일향 90nm DRAM을 개발하기 위하여 비대칭 채널 구조를 갖는 Recess Channel Array Transistor (RCAT)로 cell transistor를 구현하였다. DRAM cell transistor에서 junction leakage current 증가는 DRAM retention time 열화에 심각한 영향을 미치는 요인으로 알려져 있으며, DRAM의 minimum feature size가 점점 감소함에 따라 short channel effect의 영향으로 junction leakage current는 더욱 더 증가하게 된다. 본 실험에서는 short channel effect의 영향에 의한 junction leakage current를 감소시키기 위하여 Recess Channel Array Transistor를 도입하였고, cell transistor의 채널 영역을 비대칭으로 형성하여 data retention time을 증가시켰다. 비대칭 채널 구조을 이용하여 Recess Channel Array Transistor를 구현한 결과, sub-threshold 특성과 문턱전압, Body effect, 그리고, GIDL 특성에는 큰 유의차가 보이지 않았고, I-V특성인 드레인 포화전류(IDS)는 대칭 채널 구조인 transistor 대비 24.8% 정도 증가하였다. 그리고, data retention time은 2배 정도 증가하였다. 본 실험에서 얻은 결과는 향후 저전압 DRAM 개발과 응용에 상당한 기여를 할 것으로 기대된다.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.95-102
• /
• 2020

Six shear coaxial injectors for a 3 tonf-class liquid rocket engine using oxygen and methane as propellants were designed and manufactured by considering geometric design parameters such as a recess length and a taper angle. Cold-flow tests on the injectors were performed using water and air as simulants. By changing the water mass flow rate and air mass flow rate, the injection pressure drop under single-injection and bi-injection was measured. The discharge coefficients through the injector oxidizer-side and fuel-side were calculated and the discharge coefficient ratio between bi-injection and single-injection was obtained. Under single-injection, the recess served to reduce the injection pressure drop on the injector fuel-side. For the injectors without recess, the discharge coefficients under bi-injection were almost the same as those under single-injection. However, for the injectors with recess, the taper angle and bi-injection had a significant effect on the discharge coefficient.

• Nutrition Research and Practice
• /
• 제3권3호
• /
• pp.208-211
• /
• 2009

This study investigated the effect of vitamin $B_6$ deficiency on antioxidant enzyme activities and lipid profile in rats with exercise-induced oxidative stress. Forty eight rats were fed either a vitamin $B_6$ deficient diet (B6-) or a control diet (control) for 4 weeks and then subdivided into 3 groups: pre-exercise (PreE); post-exercise (PostE); recess after exercise (recessE). Compared to those of control group, plasma catalase and hepatic cytosol superoxide dismutase (SOD, EC 1.15.1.1) activities of B6- group were lower regardless of exercise. The ratio of reduced glutathione/oxidized glutathione (GSH/GSSG) of B6 - group was lower in PreE and there was no difference between PostE and recessE. The level of malondialdehyde (MDA) of B6- was significantly higher in PreE and PostE. High-density lipoprotein-cholesterol (HDL-C) level of B6- group was lower regardless of exercise. Atherosclerotic index of $B_6$- group was higher in PreE and there was no difference between PostE and recessE. It is suggested that a reduction in antioxidative status caused by vitamin $B_6$ deficiency may be aggravated under exercise-induced oxidative stress.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.17-24
• /
• 2016

본 연구에서 리세스가 있는 기체수소/액체산소 2차원 동축 전단 분사기에 대해 연소해석을 수행하였다. 이상기체와 실제기체 상태방정식을 이용한 정상상태 난류연소에 대해 표준 ${\kappa}-e$ 모델과 층류 화염편 모델이 선택되었다. 리세스 길이가 증가할수록 연소실 내 재순환의 크기가 커지고 와도가 강해졌다. 또한, 온도, 연소생성물, 압력의 변화가 리세스 길이에 큰 영향을 받았다. 해석된 결과들은 리세스가 있는 분사기에 의해서 효과적인 연소기를 얻을 수 있음을 보여주었다.

• 한국추진공학회지
• /
• 제10권3호
• /
• pp.9-17
• /
• 2006

본 연구는 케로신-LOX를 추진제로 하는 액체로켓엔진용 스월 동축형 인젝터의 리세스 길이에 따른 분무특성 파악을 목표로 하였다. 리세스 길이에 따른 두 추진제의 내부충돌현상에 의한 ripple의 형성과 감쇠가 인젝터 외부의 분무안정성에 영향을 미치므로 분무특성과 큰 연관성을 가진다. 또한, 리세스 길이가 증가함에 따라 평균액적크기는 증가하였으며, 혼합효율은 증가하다가 최대값에 도달한 후 다시 감소하는 경향성을 보였다.