• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1995년도 제27회 학술발표회
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1051-1054
• /
• 1993

The International Atomic Energy Agency's Statute in Article III.A.5 allows it“to establish and administer safeguards designed to ensure that special fissionable and other materials, services, equipment, facilities and information made available by the Agency or at its request or under its supervision or control are not used in such a way as to further any military purpose; and to apply safeguards, at the request of the parties, to any bilateral or multilateral arrangement, or at the request of a State, to any of that State's activities in the field of atomic energy”. Safeguards are essentially a technical means of verifying the fulfilment of political obligations undertaken by States and given a legal force in international agreements relating to the peaceful uses of nuclear energy. The main political objectives are: to assure the international community that States are complying with their non-proliferation and other peaceful undertakings; and to deter (a) the diversion of afeguarded nuclear materials to the production of nuclear explosives or for military purposes and (b) the misuse of safeguarded facilities with the aim of producing unsafeguarded nuclear material. It is clear that no international safeguards system can physically prevent diversion. The IAEA safeguards system is basically a verification measure designed to provide assurance in those cases in which diversion has not occurred. Verification is accomplished by two basic means: material accountancy and containment and surveillance measures. Nuclear material accountancy is the fundamental IAEA safeguards mechanism, while containment and surveillance serve as important complementary measures. Material accountancy refers to a collection of measurements and other determinations which enable the State and the Agency to maintain a current picture of the location and movement of nuclear material into and out of material balance areas, i. e. areas where all material entering or leaving is measurab e. A containment measure is one that is designed by taking advantage of structural characteristics, such as containers, tanks or pipes, etc. To establish the physical integrity of an area or item by preventing the undetected movement of nuclear material or equipment. Such measures involve the application of tamper-indicating or surveillance devices. Surveillance refers to both human and instrumental observation aimed at indicating the movement of nuclear material. The verification process consists of three over-lapping elements: (a) Provision by the State of information such as - design information describing nuclear installations; - accounting reports listing nuclear material inventories, receipts and shipments; - documents amplifying and clarifying reports, as applicable; - notification of international transfers of nuclear material. (b) Collection by the IAEA of information through inspection activities such as - verification of design information - examination of records and repo ts - measurement of nuclear material - examination of containment and surveillance measures - follow-up activities in case of unusual findings. (c) Evaluation of the information provided by the State and of that collected by inspectors to determine the completeness, accuracy and validity of the information provided by the State and to resolve any anomalies and discrepancies. To design an effective verification system, one must identify possible ways and means by which nuclear material could be diverted from peaceful uses, including means to conceal such diversions. These theoretical ways and means, which have become known as diversion strategies, are used as one of the basic inputs for the development of safeguards procedures, equipment and instrumentation. For analysis of implementation strategy purposes, it is assumed that non-compliance cannot be excluded a priori and that consequently there is a low but non-zero probability that a diversion could be attempted in all safeguards ituations. An important element of diversion strategies is the identification of various possible diversion paths; the amount, type and location of nuclear material involved, the physical route and conversion of the material that may take place, rate of removal and concealment methods, as appropriate. With regard to the physical route and conversion of nuclear material the following main categories may be considered: - unreported removal of nuclear material from an installation or during transit - unreported introduction of nuclear material into an installation - unreported transfer of nuclear material from one material balance area to another - unreported production of nuclear material, e. g. enrichment of uranium or production of plutonium - undeclared uses of the material within the installation. With respect to the amount of nuclear material that might be diverted in a given time (the diversion rate), the continuum between the following two limiting cases is cons dered: - one significant quantity or more in a short time, often known as abrupt diversion; and - one significant quantity or more per year, for example, by accumulation of smaller amounts each time to add up to a significant quantity over a period of one year, often called protracted diversion. Concealment methods may include: - restriction of access of inspectors - falsification of records, reports and other material balance areas - replacement of nuclear material, e. g. use of dummy objects - falsification of measurements or of their evaluation - interference with IAEA installed equipment.As a result of diversion and its concealment or other actions, anomalies will occur. All reasonable diversion routes, scenarios/strategies and concealment methods have to be taken into account in designing safeguards implementation strategies so as to provide sufficient opportunities for the IAEA to observe such anomalies. The safeguards approach for each facility will make a different use of these procedures, equipment and instrumentation according to the various diversion strategies which could be applicable to that facility and according to the detection and inspection goals which are applied. Postulated pathways sets of scenarios comprise those elements of diversion strategies which might be carried out at a facility or across a State's fuel cycle with declared or undeclared activities. All such factors, however, contain a degree of fuzziness that need a human judgment to make the ultimate conclusion that all material is being used for peaceful purposes. Safeguards has been traditionally based on verification of declared material and facilities using material accountancy as a fundamental measure. The strength of material accountancy is based on the fact that it allows to detect any diversion independent of the diversion route taken. Material accountancy detects a diversion after it actually happened and thus is powerless to physically prevent it and can only deter by the risk of early detection any contemplation by State authorities to carry out a diversion. Recently the IAEA has been faced with new challenges. To deal with these, various measures are being reconsidered to strengthen the safeguards system such as enhanced assessment of the completeness of the State's initial declaration of nuclear material and installations under its jurisdiction enhanced monitoring and analysis of open information and analysis of open information that may indicate inconsistencies with the State's safeguards obligations. Precise information vital for such enhanced assessments and analyses is normally not available or, if available, difficult and expensive collection of information would be necessary. Above all, realistic appraisal of truth needs sound human judgment.

• 한국해양환경ㆍ에너지학회지
• /
• 제15권3호
• /
• pp.227-237
• /
• 2012

본 연구는 우리나라 연안매립의 효과적인 관리방안을 고찰하기 위해 최근 공유수면 매립 현황과 특성, 매립이 집중된 사례지역의 환경 및 관련 환경평가서의 주요 문제점을 진단하였다. 공유수면매립은 남해와 서해 연안에서 집중되고 있고, 과거에는 농업용지와 산업용지의 확보가 많았으나, 최근에는 조선단지를 포함한 산업용지와 항만용지 등 매립목적이 다양화 되고 있다. 이러한 지속적인 개발사업을 위한 매립으로 인해 환경영향이 가중되고 있고, 특히 갯벌과 수산자원보호구역 등 어장이 상대적으로 큰 훼손을 받고 있는 상황이다. 갯벌지역에서의 매립 유형은 준설토 투기장, 도시개발 및 산업단지 조성이 많았다. 무분별한 매립을 지양하기 위해서는 연안통합적 접근과 적정 기준이 설정되어야 할 것이다. 단기적인 개발과 장기적인 보전 이익이 동시에 고려되어야 하는데, 특히, 사전에 환경성 문제를 충분히 다루기 위해 관련 법과 제도에 따른 해양환경평가의 개선이 필요하다.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.109-119
• /
• 2006

Objectives : This study was performed to approach of properties-flavours theory and the study of morphological standard in CORNI FRUCTUS. Methods : The properties-flavours theory were attempted with bibliographic method and various climate-information. The external-internal morphological standards were determined by using stereoscope and butanol series. Results and conclusion : 1. The significant analysis for the corni fructus as the properties-flavours theory, is a follow-up survey of the effect written in the official oriental medicine book. 2. The other analytic methods according to the gathering time, processing or storing system or especially nature or growth environment(altitude, temperature,. the mean moisture, and the agronomical survey) by way of the explanation of properties-flavours theory appears so many insufficiency at the many cases. 3. The external and internal characteristics according to the shape of original plant or herbal states, entirely correspond to all the literature on this subject. 4. According to the place of production, there are some different points. (l) In the external shapes, it is reasonable that if we make the basic standard of classification by the sharpness of color, the existence of gloss and the size of products. In the case of the Korean products, it shows bright and glossy color totally, but in the case of North Korea products, it shows black and lackluster. And in the case of the foreign products, it has softer body than Korea one and shows white color on the surface. (2) In the internal shapes, the Korea products has a thicker cuticle layer than the foreign one, and has fewer ca-oxalate in the parenchyma cell.

• 산업경영시스템학회지
• /
• 제4권4호
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.138-147
• /
• 2020

건설산업은 대표적인 일자리 산업이나 수주산업 특성으로 인한 불안정한 고용 구조, 인력 고령화 등 전반적인 일자리 질은 낮은 것으로 지적되고 있다. 이에 정부에서는 발주자가 정한 금액 이상을 근로자에게 의무적으로 지급하는 적정임금제도를 추진하고 있다. 그러나 현재 국내에서는 공사예정가격 산정 시 노무비 기준인 직종별 시중노임단가만 존재하며, 최저임금 성격의 적정임금에 대한 조사 및 연구가 미흡한 실정이다. 이에 본 연구에서는 국내 및 해외 노임사례를 조사하고, 시중노임단가와 적정임금의 차이를 비교분석하여 건설분야의 적정임금 산정을 위한 프레임워크를 제시하였다. 제시한 프레임워크를 형틀목공 사례에 적용하여 산출한 결과, 현행 시중노임단가 산정방법에 비해 4.7% 낮게 산정되었으며 최빈구간내에서 산정되어 다수의 인원이 보편적으로 형성되는 최저임금 성격에 적합한 것으로 분석되었다. 본 연구를 통해 건설분야의 적정임금제 시행을 위하여 과학적인 노임분석을 위한 임금기초자료 확보 및 합리적인 기준금액을 산정하는 데 기여할 수 있으리라 판단된다.

• 한국화재소방학회논문지
• /
• 제26권3호
• /
• pp.21-28
• /
• 2012

비정상(unsteady) 화재성장이 발생되는 반밀폐된 구획에서 환기부족화재의 열 및 화학적 특성에 관한 FDS(Fire Dynamics Simulator)의 예측성능 평가가 수행되었다. 이를 위해 실규모 ISO 9705 표준 화재실의 출입구 폭이 0.1 m로 축소되었으며, spray 노즐을 통해 Heptane 연료유량은 선형적으로 증가되었다. 수치계산에 대한 신뢰도 확보를 위하여 동일 조건에서 수행된 실험결과와의 상세한 비교가 이루어졌다. 적절한 격자계를 이용한 FDS의 결과는 구획 내부의 온도 및 열유속(heat flux)은 비교적 잘 예측하지만, 비정상 CO 및 $CO_2$ 생성특성은 적절히 예측하지 못함을 확인하였다. 이러한 결과는 최근 수행된 유사조건의 정상상태 환기부족 구획화재에 대한 FDS 예측결과와 상반된 것으로서, 반밀폐된 구획화재 모델링에서 FDS를 이용한 비정상 CO 생성특성 예측에 상당한 주위가 요구됨을 확인하였다.

• 한국동물위생학회지
• /
• 제35권2호
• /
• pp.119-128
• /
• 2012

This study was performed to investigate the freshness and nutritive components of eggs from Incheon area. The eggs of 64 brands collected from 7 hypermarkets and 6 brands collected from farms were examined to test the Haugh unit (HU), egg yolk index and specific gravity. HU and specific gravity were higher in farm eggs than in hypermarket eggs (P<0.05), and there was no difference in the egg yolk index. Among hypermarket eggs, HU and egg yolk index were higher in the graded eggs than in non-graded eggs (P<0.05), and specific gravity was not different between them. HU and egg yolk index of the eggs collected in March were higher than those in August (P<0.05). To monitor the bacterial contamination, total coliforms, total bacterial counts (TBC) and Salmonella enteritidis were examined. Salmonella enteritidis and total coliforms were not detected from all eggs. TBC of farm eggs were less than $10^1$ CFU/mL in all samples and TBC of hypermarket eggs were less than $10^1$ CFU/mL in 187 samples, $10^1{\sim}10^2$ CFU/mL in 3 samples and $10^3{\sim}10^4$ CFU/mL in 2 samples, respectively. Antimicrobial residues were not detected from all eggs tested. The vitamin E contents in the vitamin E enriched eggs from 6 brands hypermarket were 1.98~22.96 mg/yolk100 g ($14.04{\pm}8.81$ mg/yolk100g), and those of 5 brands among them were higher than the average of ordinary eggs. In one brand egg, vitamin E content was lower than the average of ordinary eggs. The vitamin E contents of ordinary eggs were 1.75~16.36 mg/yolk100 g (average $5.57{\pm}2.76$ mg/yolk100 g) and there were no price differences between vitamin E enriched eggs and ordinary eggs. In the contents of vitamin E, docosahexaenoic acid (DHA) and cholesterol, there were no significant differences according to the price. These results suggests that egg production, distribution, and management system should be improved for supplying fresh eggs to consumers at reasonable prices.

• 농업과학연구
• /
• 제22권1호
• /
• pp.110-126
• /
• 1995

Korean economy has been developed successfully in the course of implementing the five year economic development plans since 1962. The gap of incomes and quality of life between rural and urban area has been widened and it made rural farm laborers drain to urban areas. Therefore the prevailing situation of labor shortage and wage hike in rural area has made farm management deteriorate in recent years. Under the internal and international unfavorable economic conditions, marginal farm land of 66.5 thousand ha has been idled as of end of 1993. The total area outside agricultural development zone with bad farming conditions including irrigation and drainage, and land consolidation for mechanization were estimated at 360.4thousand ha equivalent to 17.5% of the total farm land area in Korea. Considering the topographical conditions of marginal lands, the effective use of marginal lands should be studied from the view point of public interest rather than from the view point of individual economic conditions. Considering the present agricultural economic settings, such as price decrease, unfavourable benefits of farm products, labour shrotage, free trade of farm products and poor physical condition of marginal lands, the institutional and realistical measures for the effective utilization of idle and marginal land should be studied as soon as possible. Detail land use pattern should be surveyed in the areas outside agricultural development zone and have to be classified as orchard farms, grass land, fish culture farms, lawn and ornamental tree farm, sight seeing and leisure farms for urban peoples, special crops production farms and common farms to be developed for farm mechanization. According to the surveyed results, the expected utilization patterns of the idle and marginal lands could be considerd as village common use, farm land base development, leisure farm development, mutual complementary utilization between urban and rural areas, G't purchase and management, credit supply and new extension services, improvement of cropping patterns and sight seeing and leisure farm patterns. For the successful and reasonable management of the marginal lands, the actions such as institutional improvement, prohibition of idle marginal land, enforcement of activities of farm management committee members and land banking system of RDC including development and utilization systems should be included.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.51-58
• /
• 1993

The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.