• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.1
• /
• pp.21-29
• /
• 2015

Other countries(USA, Europe) have performed the fire resistance design of buildings by the alternative performance design methods, which are based on fire engineering theories. However, in Korea, the process on the alternative fire resistance performance design has only suggested without any applications for real steel structures. Therefore, In the case of steel structures stagnant research on refractory measures face difficulties in introducing fire resistance design. In this study, first of all, Intumescent paint was analyze the thermal properties(thermal conductivity, specific heat and density). In Sequence, using the section factor by H-standard section propose of section concrete filled steel tube and hollow. finally presents a reasonable thickness Intumescent paint takes time to target performance of the proposed cross-section steel tube.

• Clinics in Shoulder and Elbow
• /
• v.1 no.1
• /
• pp.6-11
• /
• 1998

Shoulder is a common site for calcific deposit and is frequently asymptomatic. There is a general agreement that calcific tendinitis should be initially treated nonoperatively and excision reserved for cases unresponsive to the conservative measures. There are several reports that arthroscopic excision of symptomatic calcific deposit is proved to be efficient in the calcific tendinitis refractory to nonoperative management. The results of arthroscopic treatment of chronic resistant calcific tendinitis of the shoulder in eleven patients were evaluated. Each patient had shoulder pain for more than one year prior to the arthroscopic surgery. The average age of the patients was 48 years(range 35-70). Arthroscopic calcium removal and subacromial bursectomy was performed in all patients. Arthroscopic acromioplasty was additionally done in four patients. The results turned out to be good in nine patients with full range of motion and complete pain relief. One patient with full motion and occcasional episodes of pain was satisfactory. One patient with persistent pain was unsatisfactory which converted to satisfactory six months later after subacromial injection. So we conclude that the arthroscopic treatment is a reasonable alternative in treatment of the chronic calcific tendinitis resistant to conservative treatment.

• Journal of the Korean Professional Engineers Association
• /
• v.32 no.3
• /
• pp.92-105
• /
• 1999

With the advent of the information age and the knowledge-based society, human resource development has become a key factor in determining a nation's competitiveness. And technological qualification systems have a direct and significant influence on human resource development. In order to guarantee Korea's continued development as a competitive member of the international community, it is demanded that a Korean Technology Qualification System (KTQS) is to accept international qualification criteria. This study was conducted in order to analysis current movements about the international mutual recognition of Professional Engineer and present problems for introducing APEC Engineer System to KTQS, and also recommend reasonable plans which overcome those. Under the WTO/GATS, the liberalization of trade in professional services will steadily increase. APEC activities to facilitate the portability of qualifications is considered complementary to the WTO movement. If the government attempts to introduce the APEC criteria for university degree requirements, university curriculum standards, programs for continuing professional developments(CPD), and practical, on-site experience. In the standpoints with the recent developments of APEC Engineer agreement on profession qualification, it is important to guarantee that Korean qualifications have a common, international currency. Measures have to be taken to harmonize the qualifications standards for Professional Engineer with those set out by the WTO/GATS movement. Also this will require an increase in the quality of university curriculum and an establishment of CPD. This process will be further enhanced by the organization of APEC Engineer Monitoring committee, Consisting of government officials, professional engineers and university professors. At this committee we can discuss the best strategies to keep our nation's interests.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.65
• /
• pp.141-160
• /
• 2015

With the steady growth of our nation's economy, the purchase power of our domestic citizens has continuously enhanced. In recent years, online overseas shopping has rapidly warmed up, increasing number of Chinese people have started to purchase overseas products via internet. According to China's current legislation, the imported goods are divided into goods and items based on "profitability standard", and regulated by different rules of clearance supervision and import duties. Goods can't pass through custom and pay duties in the form of items, and the import duties burden of goods is generally much heavier than that of items. Goods of entrusted overseas shopping pass through custom and pay duties in the form of items, but goods of profitable purchasing are goods, not items. Therefore, the profitable-purchasing behavior is smuggling. Although goods of unprofitable purchasing are items, unprofitable-purchasing behavior may also constitute smuggling. The author concludes that causes of smuggling crime are: huge market demand for overseas goods, lack of customs supervision, law blank of petty foreign trade, and public's misconception of entrusted overseas purchasing are the major factors. The author proposes the corresponding preventive measures against the crime, such as to establish an one-stop service system in online Shopping Mall, to modify the Passengers' Baggage Declaration Form, to establish a relatively simplified clearance system of small cargo, to establish a relatively reasonable import duties of petty trade.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.34-40
• /
• 2009

The phase delay of output signal of APD(avalanche photo diode) caused by intensity of reflected light which comes from target. These difference of phase delay is an one of the main reason of measurement error, but there is no reasonable measurement meter and method to detect it. In this paper, to solve the problem, we propose and implement a method to measure the intensity of radiation. The method measures DC voltage which is proportional to the reflected intensity of radiation and come out from APD in receiver by realtime.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.151-159
• /
• 2006

It analyzed the mechanical behaviors of non-ballasted railway bridge (steel plate girder type) with ballast reinforced on the finite element analysis, field test and laboratory test far the static and dynamic responses. The major objective of this study is to investigate the effects and application of reinforcement for steel plate girder railway bridge by the external post-tensioning method. The reinforcement of non-ballast railway bridge had obviously stable dynamic behaviors due to the additional dead force which was ballast. But in case of static behaviors, static displacements and stresses had increased nearly the allowable values. Therefore we analyzed the mechanical behaviors of non-ballasted railway bridge with ballast reinforced and external post-tensioning reinforced on the finite element analysis and laboratory test for the static and dynamic behavior. As a result, the reinforcement of ballasted railway bridge the external post-tensioning method are obviously effective for the additional dead force which is ballast. The analytical and experimental study are carried out to investigate the post-tension force decrease bending behavior and deflection in composite bridge for serviceability. The servicing railway bridge with ballast reinforced has need of the reasonable reinforcement measures which could be reducing the effect of additional dead load that degradation phenomenon of structure by an unusual. stresses and a drop durability.

• Journal of the Korean Society for Railway
• /
• v.9 no.2 s.33
• /
• pp.160-168
• /
• 2006

The major objective of this study is to investigate the effects and application of external post-tensioning method far steel plate girder bridge. It analyzed the mechanical behaviors of steel plate girder bridge with applying external post-tensioning on the finite element analysis, field test and laboratory test fur the lateral dynamic characteristics. As a result, the reinforcement of steel plate girder bridge the external post-tensioning method are obviously effective for the lateral dynamic response which is non-reinforced. The analytical and experimental study are carried out to investigate the post-tension force decrease lateral acceleration and deflection on steel plate girder bridge for serviceability. And the external post-tensioning method reduce dynamic maximum displacement(about $10{\sim}24%$), the increase of dynamic safety is predicted by adopting external post-tensioning method. From the dynamic test results of the servicing steel plate girder bridge, it is investigated that the change degree of natural frequency is very low with applying the external post-tensioning method The servicing steel plate girder bridge with external post-tensioning has need of the reasonable reinforcement measures which could be reducing the effect of lateral dynamic behavior that degradation phenomenon of structure by an unusual response characteristic and a drop durability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.32 no.3
• /
• pp.110-117
• /
• 2009

This paper introduces a case study for efficient generation of production schedules in a tube manufacturing system. The considered scheduling problem consists of two sub problems : lot sizing for a job and Job sequencing. Since these problems require simulation optimization in which the performance measures are obtained by simulation execution, the trade-off between solution quality and computation time is an important issue. In this study, the optimal lot size for every product type is determined from simulation experiments. Then, target production quantity for each product type is transformed to several jobs such that a Job consists of determined lot size. To obtain the good solution for a Job sequence in a reasonable time, a number of alternatives are generated from heuristic rules developed by intuition and analysis of the considered system, and a job sequence is selected from simulation experiments.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.35-41
• /
• 2008

It is a fact that domestic performance art has been sharply progressed but it is focused on only performance quality technique, not on safety of performers and the audience. It is a pity that people's effort to keep safe stage environment have not traced to innovative change, eventually leading to be forced to perform under hazardous condition. This study is to find out and identify that domestic regulation and accident cases are investigated and compared with cases of advanced countries, to verify that performer and the audience are main elements to develop performance art. And it is to show more effective safety measure after pointing out hazardous elements. Research change is limited to review only performance ones of all cultural facilities and to review accident cases from these places to show reasonable safety measures for stage facilities. Operation manager covers almost all of areas such as devices, management, despite a fact that they take charge of stage facilities, illumination, sounds, already. Some conclusions are as follows; 1) performance theatre-related regulations should be established again. domestic safety standards for performance theatre safety should be established. 2) characteristic and purpose of performance place should be clarified at the stage planning and design of them 3) operation expert performance place is required to be trained to cover emergency situation at any time.

• Research in Community and Public Health Nursing
• /
• v.29 no.1
• /
• pp.97-107
• /
• 2018

Purpose: A mediated model of Korean college students' problem gambling based on Blaszczynski and Nower's pathway model is developed and tested to explore mediating roles of self-control and irrational gambling beliefs in the association between emotionally vulnerable variables and problem gambling. Methods: 273 student participants recruited from 4 universities in Seoul and Gyeonggi, Korea responded. Data were collected with a structured self-report questionnaire comprising measures of problem gambling, depression, anxiety, coping styles, irrational gambling belief, and self-control. Results: The modified research model provides a reasonable fit to the data. Depression, anxiety, reflective coping, irrational beliefs, and self-control turned out to have direct effects on problem gambling, while indirect effects were reported in some suppressive and reactive styles. These predictors account for 38% of the college students' problem gambling. Conclusion: The findings suggest that developing intervention programs for reducing depression, anxiety, irrational gambling beliefs, and increasing reflective coping and self-control are needed to prevent Korean college students'problem gambling.