• 한국전산구조공학회논문집
• /
• 제32권5호
• /
• pp.333-340
• /
• 2019

모듈형 LNG Tank의 외조를 구성하는 SCP(sandwich concrete panel)에 대해서 중속충돌시험기로 충돌시험을 수행하고 이에 대한 수치해석을 수행하였다. 충돌시험에 사용된 시험체는 가로세로 각각 2m로 외조의 일반단면과 연결부단면의 특성을 가지도록 제작하였다. 51kg의 탄자를 설계기준에 규정된 충돌에너지를 갖도록 중속충돌시험기로 45m/sec로 이상의 속도로 가속하여 충돌시켰다. 이런 충돌시험을 두 차례 반복하고 시험체의 극한능력을 평가하기 위하여 충돌속도를 2배로 하여 충돌시켰다. 충돌시험의 수치해석 모델은 LS-DYNA를 이용하여 수행되었다. 외측의 강판와 그 사이의 충진콘크리트를 고체요소로 모델링하고 전단연결재는 보요소를 이용하여 모델링하였다. 강재의 재료모델은 탄소성 및 파단거동을 고려하였으며 콘크리트의 재료는 CSCM재료로 모델링하였다. 해석에서 전면부의 충돌변형은 시험에서 얻어진 변형과 유사한 값을 얻었으나 후면부의 변형은 시험결과와 다소 작은 값을 보였다. 일반부 단면에 대한 2배속 충돌시험에서는 전후면의 강판이 파손되었으나 해석결과에서는 전면부의 강판만 파손되었다. 수치해석에서 충돌에너지는 주로 충진 콘크리트로 전이되었는데 이는 이전 연구에서 보였던 고에너지를 가진 충돌의 경우와 다른 경향이다. 작성된 모델은 구조적으로 보수적인 결과를 보이므로 실제 설계에 적용할 수 있을 것으로 판단된다.

• 한국안전학회지
• /
• 제23권2호
• /
• pp.21-29
• /
• 2008

To evaluate the structural integrity of the NPP containment building more rigorously, the effective prestress, which is one of the most affecting elements, needs to be estimated exactly. This paper presents the results of an experimental study to determine the effective prestress force in prestressed concrete beams. It is possible to improve the effective prestress measuring method by test beam, which is being applied for the investigation of the nuclear power plant in operation. If experimentally evaluated Lift-Off method in this study can be coupled with test beam test currently being used in in-service nuclear power plant, it is possible to measure prestress loss of the tendon and the level of the effective prestress load.

• 대한의용생체공학회:의공학회지
• /
• 제27권6호
• /
• pp.365-369
• /
• 2006

According to the IIHS (Insurance Institute fur Highway Safety), side impacts are made up 30% of all accidents (reported 1998). In the case of auto accidents, head and neck injuries were most common as 58%, injuries to the body's trunk equaled 32%, and injuries to the abdomen were 21%. Therefore in this study, injury of wheelchair occupant in frontal and side impact of wheelchair loaded vehicle was analyzed using computer simulation method. The occupant was restrained at the rear of wheelchair by the lap belt. The detailed fixation and restrain conditions of the wheelchair occupant are referred to SAR J2249's recommendation. We estimated HIC(Head Injury Criteria) and HNIC (Head and Neck Injury Criteria) based on measured data.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2007

We have concentrated on the performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle so far. But for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module. We built the standard to evaluate vibration and collision safety of high pressure storage system for fuel cell vehicle, and could verify reliability of high pressure storage system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.433-437
• /
• 2004

A provision crane is generally installed on the upper deck to the rear of the accommodation of the ship in order to load and unload engine part or something heavy. There are two types of provision cranes: one is jib-type and the other is monorail-type. So the natural frequency of the jib-type crane equipment is low, therefore, there are some possibility of resonance between crane structure and the main excitation sources of the ship in normal operating range. This study describe a vibration reduction technique for provision crane by applying a proper countermeasure through finite element analysis and modal test. In order to find out weak point in design of provision crane, a sensitive analysis has been performed.

• 농촌지도와개발
• /
• 제23권4호
• /
• pp.431-439
• /
• 2016

There are rural development policy for creating liveable rural. The support structure of the capacity phase of the Master Plan of Comprehensive Rural Village Development Project would that one. The support structure of the capacity phase has implied the assumption that the accumulated capacity of the village to the previous step will have a significant impact on the business to the next level. Rural development should be understood that simple: rather than for business applications, processes community is going to build capacity through continuous learning and practice. Its accumulated capacity should be possible to predict and then steps must be developed continuously for a long time, looking at the previous phase. Thus, according to the support structure of the capacity phase, it should be applied a causal relationship between the front and rear phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.34.2-34.2
• /
• 2011

Wind guide can be installed on the top of buildings to collect wind. In this study, optimum shape of wind guide is developed, and proposed to combinate with the vertical wind turbine. Impact of parameters for wind guide is analyzed with several cases planned by Taguchi test plan. Front angle, rear angle, and roof angle are selected as key variables and changed into four different levels. By the experimental plan, totally, 64 cases are reduced to 16 cases of analysis. With optimum design of wind guide, the installed vertical axis wind turbines can be operated with maximum power output.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• 자동차안전학회지
• /
• 제7권1호
• /
• pp.13-19
• /
• 2015

Recently, Child safety has become one of the issue with Q10 dummy representing large child. The objective of this paper was to evaluate performance of three child restraints system (backless booster, high-back booster and without booster) by changing D-ring location in the rear seat. Sled tests were carried out with a Q 10 in 64km/h frontal impact. Before the dynamic sled tests, we assessed dummy positioning with difference in CRS types and height adjustment positions. Dynamic sled test results indicated that there is different performance of CRS types and belt routing. These test results will use as base line data for development CRS safety performance for Q 10.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.634-639
• /
• 2004

Under light collision accidents, the energy absorption strategy for the coupler and expansion tube of the TTX(Tilting Train Express) initial design is established in the paper. Also, 1st shearing bolts are designed. When the absorbed energy of the coupler reaches its maximum, the connecting bolts between the coupler and the car body are sheared off not to transmit the impact force to the car body structure. To absorb more energy after the lst shearing bolts work, a expansion tube is designed conceptually and installed at the rear part of the coupler. Using Hyper-Mesh and LS-DYNA, pre/post processing and light collision analyses are preformed, respectively.