• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.53-56
• /
• 2009

반사와 굴절이 합쳐진 새로운 형태의 하이브리드 태양광 집광 장치로 기존 집광 장치에 비해 초점 거리가 짧게 설계되었다. 프레넬 렌즈 형태의 굴절부와 프레넬형의 다수의 포물선 반사경이 공통으로 후면 초점(rear focus)을 가지도록 배치하여 기존 프레넬 렌즈만으로 구성된 것보다 선형 집광의 경우는 3배, 점 집광의 경우는 10배 이상 집광비를 높일 수 있다.아울려 이를 이용한 선형 집광형 발전 시스템과 점형 집광 장치는 나름대로 장점을 가진다.

• 소성∙가공
• /
• 제17권7호
• /
• pp.481-485
• /
• 2008

The subframe type rear suspension consisting of a side member and a front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. In this study, a subframe type rear suspension by hydroforming has been developed. In designing suspension, a driving stability and durability should be considered as an important factor for the performance improvement, respectively. Thus, we focus on increasing the stiffness of suspension and decreasing the maximum stress affecting a durability cycle life. Several optimization design techniques such as shape, size, and topology optimization are implemented to meet these requirements. The shapes of rear suspension obtained from optimization are formed by using hydroforming process. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권8호
• /
• pp.653-663
• /
• 2009

본 논문에서는 세 대의 카메라를 이용하여 사각지대를 효과적으로 제거하기 위한 파노라믹 비전 시스템(panoramic vision system)을 제안한다. 차량의 후방에는 광각 카메라를 사용하여 후방 거울(rear-view mirror)로부터 보이지 않는 사각지대를 제거하며, 나머지 두 대의 카메라는 측면 거울(side-view mirror)의 아래에 설치하여 측면 거울로 보지 못하는 사각지대를 제거한다. 좀 더 효과적인 사각지대 제거를 위해서 세 대의 카메라에서 얻어지는 영상을 정합하는 방법을 제공한다. 먼저, 후방 카메라에서 얻은 영상을 보정하고, 보정된 영상에서 focus-of-contraction(FOC)을 구한다. 그 뒤에 측방 카메라의 영상과 후방 카메라의 영상 사이의 호모그래피(homography)를 구한다. 그 다음으로 영상을 차도와 배경 영역으로 분리하고, 호모그래피를 사용하여 분리한 차도를 정합하고, 가상의 평면에 배경을 투영하여 최종정합을 완성한다. 마지막으로 정합된 영상을 보다 효과적으로 보여주기 위한 실린더 파노라마 영상, 가상의 Top-view 시스템, 그리고 차량의 다양한 정보와 함께 사각지대 영상을 보여주는 통합 정보 가시화 영상을 생성하여 제공한다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.273-280
• /
• 2019

Carbon fiber composite laminate has been widely used in the area of sports applications such as race car, golf club, fishing rods, yacht. In this study, carbon fiber composite laminate was used in the rear upright of leisure purposed small size single-seat electric race car to reduce its unsprung mass of suspension system. The focus of this research is to investigate in finding optimal stacking lay-up of rear upright laminated with carbon fiber composite in the early design phase. Forces transferred from circuit road to rear upright were estimated through MBD(Multi-Body Dynamics)model of the rear suspension geometry. To evaluate the strength of the rear upright laminated with carbon fiber composite which generally behaves in an anisotropic or orthotropic manner, FEA(Finite Element Analysis) model suitable for composite materials was built followed by its strength was evaluated depending on different stacking lay-up. The result showed that Symmetric stacking lay-up [$45^{\circ}/-45^{\circ}/90^{\circ}/0^{\circ}$]s for frontal area and symmetric stacking lay-up with 1mm aluminum core [$45^{\circ}/-45^{\circ}/90^{\circ}/Core$]s for rear area were most suitable of 16 lay-up cases from the side of both strength based on Tasi-wu failure index and weight.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.205-208
• /
• 2008

Generally, there are several types in rear suspension. The rear suspension of subframe type consisting of side member and front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. The optimized rear suspension of subframe type using hydroforming method has been developed in this study. In designing suspension, the driving stability and durability performance should be considered as an important factor. The stability is related to dynamic frequency and durability is connected with stress analysis of structure. We focus on increasing the stiffness of suspension and decreasing the maximum stress relating to durability cycle life. For making use of the merits of hydroforming which is possible to make the bead, tube expansion, and feeding in desiring position, several optimization design techniques such as shape, size, and topology optimization are proposed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• 동굴
• /
• 제79호
• /
• pp.47-51
• /
• 2007

As time goes by, ultrasonic wave is getting important and new technology, which is adapted to ultrasonic wave is used to industry such as home appliance, automobile, and high-tech industry. Especially, ultrasonic wave is used an alarm device whether there are things at the rear of I. It's do important device in automobile system because it can prevent car-accident from inattention of the driver. Actually, there has already been lots of the alarm device. But it's expensive and so difficult to set the device. So almost driver don't set device at their automobile. We focus on these problems. We want to make cheap md easy setting device. Ultrasonic wave sensor emits Ultrasonic-signal at outgoing part and receive part accept the signal. Sensor analyzes the signal and Distance is displayed on LCD of device. The device makes alarm if distance is near from something of rear. The device makes break-system operate to prevent drivers from crashing if distance is so near. This device is portable. So normal deriver can set it easily.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.141-150
• /
• 2017

A rapid increase in traffic accidents involving senior vehicle occupants has been an issue in Korea because of the aging of the population occurring at one of the fastest rates in the world; unfortunately, few studies beyond several looking at the effect of senior occupants on the level of accident injury severity can be found in the literature. A Multinomial logit model was estimated with Newton-Raphson algorithm to perform bias-reducing penalized likelihood optimization. Model covariates integral to developing the model were included, but the main focus was on the interaction of seating position and injury to senior vehicle occupants. It was found that the likelihood of an accident resulting in a fatality increased: 2.2 times for the driver seat, 2.7 times for the front passenger seat, and even 6.7 times for the rear seat. A mandatory seatbelt law to be extended to the rear seat needs to pass the assembly as soon as possible, and government, industry, and safety groups should be encouraged to join forces to strongly carry out targeted campaigns for the wearing of seatbelts in all vehicle seats to enhance the safety of senior occupants as well as other occupants who are vulnerable to road traffic accidents.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.594-599
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for different models. Observation of flow characteristics and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was used to simulate the waves and after obtaining the desired wave properties; the augmentation channel plus the front guide nozzle and rear chamber were integrated to the numerical wave tank. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall moved sinusoidally with the general function, x=asin$\omega$t The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code ANSYS-CFX.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.19-27
• /
• 2015

In the present study, an effort was made to numerically investigate rectangular cavity aeroacoustics with and without doors. The simulation was performed on an open cavity with an aspect ratio of 5:1:1 at Mach 0.85 using the delayed detached eddy simulation (DDES) approach based on the Spalart-Allmaras model. Two cavity configurations, a clean cavity and a cavity with doors, were modeled. The results obtained from the clean cavity were compared with the experimental sound pressure levels (SPL) and the root mean square for the pressures applied. Furthermore, comparisons of frequencies were made using a modified semi-empirical Rossiter formula. The simulation using DDES precisely predicted the pressure fluctuation and the results matched the experiment quite well. The SPLs at the rear of the cavity were much higher than those in the front due to the instability of the shear layer impinging on the rear wall. Comparisons of DDES for the clean cavity and the doors-on cavity revealed that the SPLs inside the cavity as well as the magnitude of tones are amplified by the side doors. The main focus of this investigation was to obtain a better understanding of the open cavity acoustic resonance phenomenon and investigate the effects of cavity doors on the SPL.

• 한국조경학회지
• /
• 제40권4호
• /
• pp.62-77
• /
• 2012

본 연구는 조선시대 궁궐 내에 조성된 농경지 조영의 양상과 공간적 특성을 분석하여 유교적 농본 중심의 시대상이 궁궐 안에서 특수한 권농의 공간으로 반영되었음을 구명하고자 하였다. 대상지는 경복궁 후원, 창경궁 후원과 경복궁 신무문 밖 후원이 되며, 문헌조사를 중심으로 수행되었다. 궁궐 후원 농경지는 "농사직설"의 편찬, 친경례와 기곡제의 설행으로 대변되는 조선 통치집단의 권농정책의 연장선상에서 임금이 자신의 거주지인 궁궐 안에 한 해 농사의 풍흉을 가늠할 포지를 조성한 것이며, 국초부터 일제 강점기 직전까지 각 궁궐에서 운영되었다. 조선시대 후원 농경지 4개소에 대한 분석 결과로는 첫째, 세종 때 조성된 경복궁 후원 농경지는 현 향원지 내부에 존재하고 있었으며, 선진농법을 확인하기 위한 시험포지로 조성되었다. 성종이 조영한 창경궁 후원 농경지는 조선 최초의 친경례 직후에 조성되어 적전친경의 맥락으로 이해해 볼 수 있다. 인조는 경덕궁이 임시로 거처했던 시어소임에도 불구하고, 체류의 기간이 장기화되자 정전의 뜰을 파고 농포로 조성하였는데, 조선시대 정치사에서 후원 농경지의 비중이 매우 높았다는 것을 시사한다. 고종이 조성한 경농재 일곽의 농포는 선대의 권농행보를 계승하면서 창경궁 후원 농경지의 공간 구성을 그대로 가져온 특성을 보이고 있다. 둘째, 관수와 수체계, 관경대의 명칭, 입지에 있어서 일정한 공통점이 도출되었는데, 이는 조선시대 농본공간의 보편적 형식으로 판단하였다. 본 연구에서는 후원 농경지 외에 궁궐 내에서 내관들에 의해 관리되던 채전과 국가의 큰 제사에 쓰일 과일을 위한 궁궐 내 과수원의 운영 양상을 고찰하여 조선시대 궁궐 조경이 엄숙함, 질서정연함이나 장식성에만 치중되지 않고, 실생활에 도움이 되는 실용적 생산적 조경공간으로 존재하고 있었음을 밝힐 수 있었다. 또한 궁궐에서 왕실의 주도로 생산적 조경의 다양한 활동이 전개되고 있었고, 임금이 솔선수범하여 선진농법을 시험하였다는 점은 우리의 고유한 궁궐조경의 일면이 되며, 조선의 독자적인 궁궐문화로서 그리고 여타의 유교 국가에는 없었던 유일한 애민농본의 조경으로 보아야 할 것이다.