• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.53-56
• /
• 2009

반사와 굴절이 합쳐진 새로운 형태의 하이브리드 태양광 집광 장치로 기존 집광 장치에 비해 초점 거리가 짧게 설계되었다. 프레넬 렌즈 형태의 굴절부와 프레넬형의 다수의 포물선 반사경이 공통으로 후면 초점(rear focus)을 가지도록 배치하여 기존 프레넬 렌즈만으로 구성된 것보다 선형 집광의 경우는 3배, 점 집광의 경우는 10배 이상 집광비를 높일 수 있다.아울려 이를 이용한 선형 집광형 발전 시스템과 점형 집광 장치는 나름대로 장점을 가진다.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.481-485
• /
• 2008

The subframe type rear suspension consisting of a side member and a front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. In this study, a subframe type rear suspension by hydroforming has been developed. In designing suspension, a driving stability and durability should be considered as an important factor for the performance improvement, respectively. Thus, we focus on increasing the stiffness of suspension and decreasing the maximum stress affecting a durability cycle life. Several optimization design techniques such as shape, size, and topology optimization are implemented to meet these requirements. The shapes of rear suspension obtained from optimization are formed by using hydroforming process. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• Journal of KIISE:Software and Applications
• /
• v.36 no.8
• /
• pp.653-663
• /
• 2009

In this paper, we propose a blind spots elimination system using three cameras. A wide-angle camera is attached on trunk for eliminating blind spots of a rear-view mirror and two cameras are attached on each side-view mirror for eliminating blind spots of vehicle's sides. In order to eliminate blind spots efficiently, we suggest a method to build a panoramic mosaic view with two side images and one wide-angle rear image. First, we obtain an undistorted image from a wide-angle camera of rear-view and calculate the focus-of-contraction (FOC) in undistorted images of rear-view while the car is moving straight forward. Second, we compute a homography among side-view images and an undistorted image of rear-view in flat road scenes. Next, we perform an image registration process after road and background region segmentation. Finally, we generate various views such as a cylinder panorama view, a top view and an information panoramic mosaic view.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.273-280
• /
• 2019

Carbon fiber composite laminate has been widely used in the area of sports applications such as race car, golf club, fishing rods, yacht. In this study, carbon fiber composite laminate was used in the rear upright of leisure purposed small size single-seat electric race car to reduce its unsprung mass of suspension system. The focus of this research is to investigate in finding optimal stacking lay-up of rear upright laminated with carbon fiber composite in the early design phase. Forces transferred from circuit road to rear upright were estimated through MBD(Multi-Body Dynamics)model of the rear suspension geometry. To evaluate the strength of the rear upright laminated with carbon fiber composite which generally behaves in an anisotropic or orthotropic manner, FEA(Finite Element Analysis) model suitable for composite materials was built followed by its strength was evaluated depending on different stacking lay-up. The result showed that Symmetric stacking lay-up [$45^{\circ}/-45^{\circ}/90^{\circ}/0^{\circ}$]s for frontal area and symmetric stacking lay-up with 1mm aluminum core [$45^{\circ}/-45^{\circ}/90^{\circ}/Core$]s for rear area were most suitable of 16 lay-up cases from the side of both strength based on Tasi-wu failure index and weight.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

Generally, there are several types in rear suspension. The rear suspension of subframe type consisting of side member and front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. The optimized rear suspension of subframe type using hydroforming method has been developed in this study. In designing suspension, the driving stability and durability performance should be considered as an important factor. The stability is related to dynamic frequency and durability is connected with stress analysis of structure. We focus on increasing the stiffness of suspension and decreasing the maximum stress relating to durability cycle life. For making use of the merits of hydroforming which is possible to make the bead, tube expansion, and feeding in desiring position, several optimization design techniques such as shape, size, and topology optimization are proposed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.47-51
• /
• 2007

As time goes by, ultrasonic wave is getting important and new technology, which is adapted to ultrasonic wave is used to industry such as home appliance, automobile, and high-tech industry. Especially, ultrasonic wave is used an alarm device whether there are things at the rear of I. It's do important device in automobile system because it can prevent car-accident from inattention of the driver. Actually, there has already been lots of the alarm device. But it's expensive and so difficult to set the device. So almost driver don't set device at their automobile. We focus on these problems. We want to make cheap md easy setting device. Ultrasonic wave sensor emits Ultrasonic-signal at outgoing part and receive part accept the signal. Sensor analyzes the signal and Distance is displayed on LCD of device. The device makes alarm if distance is near from something of rear. The device makes break-system operate to prevent drivers from crashing if distance is so near. This device is portable. So normal deriver can set it easily.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.141-150
• /
• 2017

A rapid increase in traffic accidents involving senior vehicle occupants has been an issue in Korea because of the aging of the population occurring at one of the fastest rates in the world; unfortunately, few studies beyond several looking at the effect of senior occupants on the level of accident injury severity can be found in the literature. A Multinomial logit model was estimated with Newton-Raphson algorithm to perform bias-reducing penalized likelihood optimization. Model covariates integral to developing the model were included, but the main focus was on the interaction of seating position and injury to senior vehicle occupants. It was found that the likelihood of an accident resulting in a fatality increased: 2.2 times for the driver seat, 2.7 times for the front passenger seat, and even 6.7 times for the rear seat. A mandatory seatbelt law to be extended to the rear seat needs to pass the assembly as soon as possible, and government, industry, and safety groups should be encouraged to join forces to strongly carry out targeted campaigns for the wearing of seatbelts in all vehicle seats to enhance the safety of senior occupants as well as other occupants who are vulnerable to road traffic accidents.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.594-599
• /
• 2009

Recent developments such as concern over global warming, depletion of fossil fuels and increase in energy demands by the increasing world population has eventually lead to mass production of electricity using renewable sources. Apart from wind and solar, ocean holds tremendous amount of untapped energy in forms such as geothermal vents, tides and waves. The current study looks at generating power using waves and the focus is on the primary energy conversion (first stage conversion) of incoming waves for different models. Observation of flow characteristics and the velocity in the augmentation channel as well as the front guide nozzle are presented in the paper. A numerical wave tank was used to simulate the waves and after obtaining the desired wave properties; the augmentation channel plus the front guide nozzle and rear chamber were integrated to the numerical wave tank. The waves in the numerical wave tank were generated by a piston type wave maker which was located at the wave tank inlet. The inlet which was modeled as a plate wall moved sinusoidally with the general function, x=asin$\omega$t The augmentation channel consisted of a front nozzle, rear nozzle and an internal fluid region representing the turbine housing. The analysis was performed using the commercial CFD code ANSYS-CFX.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.1
• /
• pp.19-27
• /
• 2015

In the present study, an effort was made to numerically investigate rectangular cavity aeroacoustics with and without doors. The simulation was performed on an open cavity with an aspect ratio of 5:1:1 at Mach 0.85 using the delayed detached eddy simulation (DDES) approach based on the Spalart-Allmaras model. Two cavity configurations, a clean cavity and a cavity with doors, were modeled. The results obtained from the clean cavity were compared with the experimental sound pressure levels (SPL) and the root mean square for the pressures applied. Furthermore, comparisons of frequencies were made using a modified semi-empirical Rossiter formula. The simulation using DDES precisely predicted the pressure fluctuation and the results matched the experiment quite well. The SPLs at the rear of the cavity were much higher than those in the front due to the instability of the shear layer impinging on the rear wall. Comparisons of DDES for the clean cavity and the doors-on cavity revealed that the SPLs inside the cavity as well as the magnitude of tones are amplified by the side doors. The main focus of this investigation was to obtain a better understanding of the open cavity acoustic resonance phenomenon and investigate the effects of cavity doors on the SPL.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.62-77
• /
• 2012

This study aimed to investigate the Confucian-oriented agriculture phase of the Joseon Dynasty, which was reflected at the palaces, by analyzing constructional aspects and spatial characteristics of farmlands at the palace rear gardens. The objective sites were the rear gardens of Gyeongbok Palace, Changkyung Palace, and the outside of Sinmoomoon(神武門) This study was based on literature reviews. The farmlands at the palace rear garden were constructed to self-estimate the year's harvest condition within the palaces. It was a part of the agriculture encouragement policy on governing the group of Joseon like publishing the Nongsajiksul(農事直說) and establishing the Chingyeongnye(親耕禮: king's own cultivation ceremony) and Kikokje(祈穀祭: the rite of praying for grain). In addition, farmlands of the rear garden were operated from the beginning of the state almost until the Japanese colonial era. The results were summarized as follows: First, Gyeongbok Palace rear garden's farmland which begin at the reign of Sejong(世宗) existed at the present Hyangwonji(香遠池) area. It was constructed in order to check the advanced agricultural technologies. The rear garden's farmland in Changkyung Palace, which was executed during the reign of Seongjong(成宗), was constructed right after the initial Chingyeongnye of the Joseon Dynasty. Therefore, it might be understood as the context of the king's own cultivation of the Jeokjeonchinkyung(籍田親耕). Injo(仁祖) dug for farmland in the ground of the Gyemgdeok Palace(慶德宮) though there was some stay palace, when his stay dragged out for too long. This bespeaks that those farmlands at the palace rear gardens were of great importance in the Joseon political history. The farmland near Gyeongnongjae(耕農齋), which was made during the reign of Gojong(高宗), inherited predecessor's walks of the promoting agriculture and exhibited spatial compositions such as the rear garden's farmland at Changkyung Palace. Secondly, irrigation, its water systems, the name of observatory to study farming[觀耕臺] and location requirements for farmland had something in common. It was assumed as universal forms of physiocracy-space in the Joseon Dynasty. In this study, by considering aspects of operating about vegetable garden managed by eunuchs and of the orchard in palace to cultivate fruits for national ceremonies, it could be assumed that landscape architecture of royal palace in the Joseon Dynasty did not only focus on solemnity, orderliness and fanciness but also on the practical and productive which was helpful in life. In addition, the diverse activities of productive landscape architecture led by the royal family in palaces, and the initiatively tested advanced agricultural technologies by the king were considered as an aspect of the Korean traditional specific royal palace landscape architecture. That is considered sole landscape not only to love of the people but also the 'agriculture-first' principle which were absent from other nations.