• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.29-36
• /
• 2009

Realtime tide and storm-surge computations for the Yellow Sea were conducted using the Parallel Finite Element Model. For these computations a high resolution grid system was constructed with a minimum node interval of loom in Gyeonggi Bay. In the modeling, eight main tidal constituents were analyzed and their results agreed well with the observed data. The realtime tide computation with the eight main tidal constituents and the storm-surge simulation for Typhoon Sarah(1959) were also conducted using parallel computing system of MPI-based LINUX clusters. The result showed a good performance in simulating Typhoon Sarah and reducing the computation time.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.15-23
• /
• 2006

On this study, realtime GPS technique and combination of GPS/GLONASS technique are used to extracting coastline. Th￡ object of coastline is Gwanganri beach located in Busan. The coastline is observed along the traces of coastline when high wave of scar by using digital map of 1:1,000 and at random time zone, coastline is surveyed along the boundary line that is contacting with sea water level. When the coastline of random time zone is converted by height of tide table, the coastline when high wave of scar and converted coastline are shown as coincident approximately.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.720-721
• /
• 2005

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.2
• /
• pp.69-83
• /
• 2018

The South China Sea (SCS) is a typical marginal sea characterized with the deep basin, shelf break, shallow shelf, many straits, and complex bathymetry. This study investigated the tidal characteristics and propagation, and reproduced typhoon-induced storm surge in this region using the regional real-time tide-surge model, which was based on the unstructured grid, resolving in detail the region of interest and forced by tide at the open boundary and by wind and air pressure at the surface. Typhoon Haiyan, which occurred in 2013 and caused great damage in the Philippines, was chosen as a case study to simulate typhoon's impact. Amplitudes and phases of four major constituents were reproduced reasonably in general, and the tidal distributions of four constituents were similar to the previous studies. The modelled tide seemed to be within the acceptable levels, considering it was difficult to reproduce the tide in this region based on the previous studies. The free oscillation experiment results described well the feature of tide that the diurnal tide is prevailing in the SCS. The tidal residual current and total energy dissipation were discussed to understand the tidal and sedimentary environments. The storm-surge caused by typhoon Haiyan was reasonably simulated using this modeling system. This study established the regional real-time barotropic tide/water level prediction system for the South China Sea including the seas around the Philippines through the validation of the model and the understanding of tidal characteristics.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.130-136
• /
• 2016

In this paper, the real time monitoring system for the abnormal state of marine algae does not detect the plankton which may directly cause the red tide or the water bloom. But checks both oxygen reduction and nitrogen reduction in water, which indicates the characteristics of zooplankton and phytoplankton respectively, and this system makes a module that monitors in real time the temperature and the illumination of the water, which are indirect factors, with sensors placed in and outside the water, and this module transmits signals periodically at specific intervals to a sever that builds up data base, and the data collected in these ways will be analyzed and compared with the standard data from Ministry of Oceans and Fisheries, and then these data will be made the adequate form of information to be provided to the users as visual information, thus, this system intends to make a red tide and water bloom monitoring system tailored for individual fish farm businesses that has local characteristics and can quickly operate outside working hours, which differs from the existing wide area detecting and monitoring systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.310-313
• /
• 2012

Recently, Land reclamation created agricultural land which is farming. Agricultural land which is farming have accident with frequency it is damage to crop of from brine. So, desalinization is the first priority prerequisite task in using the in reclaimed farm land. Vibrant research and technical development is working for reclaimed of desaliaization. But, Current technology is impossible desalinization of reclaimed land. As fast almost of people don't worry about concentration of salt in using the land reclamation of agricultural land irrigation water and river mouth of fountainhead of efforting from freshwater lake also ebb and flow of the tide land reclamation of agricultural land influnce from an increase of salt concentration by weather conditions and a malfunction of sea dike sluice In this paper, current is increased salt concentration in real time graphs were implemented to utilize external servers in using the WCDMA module. Inaddition it have to operate alarm in increase of salt concentration. besides, this program have implemented realtime concentration of salt monitoring system which save date in realtime the user can check again.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.707-715
• /
• 2008

The ocean ecosystem and the marine farms were damaged after latest oil spill in Taean. They suffered heavily due to the expansion of the red tide on the coast and the sudden changes in water temperature. We should develop the way to deal with various factors to reduce the damage. In this paper, real time data with which are supplied us through many kinds of sensors on measure equipments will be processed to the visualized shape. Simple numeric data and 2D graph will be changed 2D or 3D graphic objects and animations using WPF, a new effect method in user interface area. This visualization system for environmental data shows us various pictures and offers multimedia data communication.