• Smart Structures and Systems
• /
• 제4권5호
• /
• pp.667-684
• /
• 2008

Numerous devices exist for reducing or eliminating seismic damage to structures. These include passive dampers, semi-active dampers, and active control devices. The performance of structural systems with these devices has often been evaluated using numerical simulations. Experiments on structural systems with these devices, particularly at large-scale, are lacking. This paper describes a real-time hybrid testing facility that has been developed at the Lehigh University NEES Equipment Site. The facility enables real-time large-scale experiments to be performed on structural systems with rate-dependent devices, thereby permitting a more complete evaluation of the seismic performance of the devices and their effectiveness in seismic hazard reduction. The hardware and integrated control architecture for hybrid testing developed at the facility are presented. An application involving the use of passive elastomeric dampers in a three story moment resisting frame subjected to earthquake ground motions is presented. The experiment focused on a test structure consisting of the damper and diagonal bracing, which was coupled to a nonlinear analytical model of the remaining part of the structure (i.e., the moment resisting frame). A tracking indictor is used to track the actuator ability to achieve the command displacement during a test, enabling the quality of the test results to be assessed. An extension of the testbed to the real-time hybrid testing of smart structures with semi-active dampers is described.

• 한국축산식품학회지
• /
• 제29권4호
• /
• pp.506-512
• /
• 2009

본 연구에서는 편육과 브로콜리 싹에 Salmonella 농도를 단계별로 접종하고 배지법, $VIDAS^{(R)}$, real-time PCR의 양성 검출률을 비교함으로써 $VIDAS^{(R)}$, real-time PCR의 Salmonella 검출력을 검증하였으며, 또한 각 식품별로 검출률에 차이가 있는가를 알아보았다. 편육과 브로콜리 싹(500 g)에 3단계 농도(<15, 15-100, 100-1000 CFU/500 g)를 접종하고 20개 샘플로 나눈 후 배지법, $VIDAS^{(R)}$ Salmonella ($VIDAS^{(R)}$ SLM), real-time PCR법을 시행하여 검출능력을 비교하였다. 편육에서 배지법, $VIDAS^{(R)}$, real-time PCR를 이용하여 Salmonella를 검출한 결과, 낮은 접종 농도(<15 CFU/500 g)에서도 Salmonella가 검출되었고 $VIDAS^{(가)}$O real-time PCR 모두 배지법과 통계학적 유의차가 나타나지 않았다. 반면에 브로콜리 싹을 이용하였을 때 낮은 접종 농도에서는 Salmonella가 검출되지 않았으며 $VIDAS^{(가)}$O real-time PCR 모두 배지법보다 더 많은 샘플을 검출하였다. 따라서 정상 세균총이 많은 야채 식품의 경우 배지법은 경쟁 세균에 의해 검출이 저해되므로 이보다 영향을 덜 받는 $VIDAS^{(R)}$법이나 real-time PCR법을 이용하여 검출하는 것이 더 효과적이라고 할 수 있겠다. 또한 이러한 신속 진단법을 이용하면 $VIDAS^{(R)}$는 3일, real-time PCR은 1일 이내에 배지법과 같거나 보다 높은 검출률로 Salmonella를 검출할 수 있는 것으로 나타났다.

• 대한전기학회논문지
• /
• 제43권4호
• /
• pp.638-647
• /
• 1994

This paper describes the real time Hardware-In-the Loop Simulation(HILS) that is an efective tool for design, testing and performance evaluation of the guidanc eflight system. The real time HILS was performed by using a 3-axis flight motion simulator, real time computer, I/O system and flight control system hardware along with the assumed flight trajectory of the guidance flight system. Also, we proved the validity of the real time HILS is the guidance flight system by comparing its simulation results with the software simulation data and telemetry data.

• 인터넷정보학회논문지
• /
• 제19권4호
• /
• pp.1-6
• /
• 2018

스마트시티는, 각종 센서들로부터의 데이터를 수집, 처리하여 시민들을 위하여, 다양한 스마트 서비스들을 제공한다. 본 논문에서는, 이과 같은 스마트시티 서비스 중의 하나로서, 소음지도를 시민에게 실시간으로 제공하기 위한 연구 결과를 발표한다. 본 논문은, 스마트 시티의 융복합된 유비쿼터스센서네트워크들로부터 끊임없이 전달되는 대량의 스트림 데이터를, 실시간으로 전달받아서, 지리정보시스템 (GIS)의 정보들과 융합하여, 시각적으로 소음정보를 표시하여 주는, 3차원 소음지도를 실시간으로 제작하는, 실시간 분산병렬처리 방법론을 제시하였다. 이 방법론을 오픈소스소프트웨어를 활용하여 실제 시스템으로 개발되어 구현하였다. 본 논문에서는, 이와 같이 구현된 시스템들 중에서, 아파치 스톰(Apache Storm) 프레임워크를 사용하여 구현한 실제 시스템을 소개한다. 본 연구에서는, 이 실제 구현된 시스템을 성능평가하였다. 대량의 비정형 데이터를 실시간으로 처리하려면, 큰 컴퓨팅 파워가 필요하며, 필요한 컴퓨팅 파워의 규모도 사전에 알 수 없다는 문제들이 있다. 이 문제들을 해결하기 위하여, 본 연구에서는, 컴퓨팅 파워를 자유롭게 조절하여 공급할 수 있는. 클라우드 컴퓨팅을 사용하여 성능평가를 하였다. 이와 같은 성능평가를 통하여, 본 논문에서 제시한 방법론이 적절함을 확인하였고, 개발하여 구현한 시스템이 잘 작동함도 확인하였다. 나아가서는. 실시간으로 소음지도를 생산할 수 있음을 확인하였다. 본 논문은 이와 같은 성능평가 내용도 소개하고 상세히 설명한다.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.273-278
• /
• 2017

This paper is to study a technique to detect the real-time route aberrance on the passage route using bumper area of the ship domain theory. In order to evaluate the risk of route aberrance, a quarter line was created between the center line and the outer line, and a passage route with the image line outside the outer line was designed. It calculated the real-time route aberrance with the vessel bumper area to measure the risk level on the passage route. The route aberrance using overlap bumper area was simulated through three kinds of scenario vessel at the designed passage route. In this paper, we proposed Ratio to Aberrance Risk as one of the evaluation parameter to detect the route aberrance risk at each sector in the passage route and to give the evaluation criteria of 5 levels for seafarer's navigation safety. The purpose of this work is to provide the information of the route aberrance to seafarer automatically, to make it possible to prevent the human errors of seafarer on the high risk aberrance route. As the real-time risk of route aberrance on the passage route is automatically evaluated, it was well thought that seafarer can have only a little workload in order to know the risk of route aberrance at early-time. Following the further development of this work, the techniques for detecting the real-time route aberrance will be able to use the unmanned vessel.

• 제어로봇시스템학회논문지
• /
• 제9권1호
• /
• pp.90-98
• /
• 2003

The real-time industrial network, often referred to as fieldbus, is an important element for building automated manufacturing systems. Thus, in order to satisfy the real-time requirements of field devices, numerous fieldbus protocols have been announced. But the application of fieldbus has been limited due to the high cost of hardware and the difficulty in interfacing with multi-vendor products. Therefore, as an alternative to fieldbus, the computer network technology, especially Ethernet (IEEE 802.3), is being adapted to the industrial environment. However, the crucial technical obstacle for Ethernet is its non-deterministic behavior that makes it inadequate for industrial applications where real-time data have to be delivered within a certain time limit. Recently, the development of switched Ethernet shows a very promising prospect for industrial application due to the elimination of uncertainties in the network operation resulting in much improved performance. This paper focuses on the application of the switched Ethernet for industrial communications. More specifically, this paper presents an analytical and experimental performance evaluation of the switched Ethernet and a case study about networked control system.

• ETRI Journal
• /
• 제45권4호
• /
• pp.603-614
• /
• 2023

Advancements in remote medical technologies and smart devices have led to expectations of contactless rehabilitation. Conventionally, rehabilitation requires clinicians to perform routine muscle function assessments with patients. However, assessment results are difficult to cross-reference owing to the lack of a gold standard. Thus, the application of remote smart rehabilitation systems is significantly hindered. This study analyzes the factors affecting the real-time evaluation of muscle function based on biometric sensor data so that we can provide a basis for a remote system. We acquired real clinical stroke patient data to identify the meaningful features associated with normal and abnormal musculature. We provide a system based on these emerging features that assesses muscle functionality in real time via streamed biometric signal data. A system view based on the amount of data, data processing speed, and feature proportions is provided to support the production of a rudimentary remote smart rehabilitation system.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.125-130
• /
• 2021

Scaffold is used to produce bio sensor. Scaffold is required high dimensional accuracy. 3D printer is used to manufacture scaffold. 3D printer can't detect defect during printing. Defect detection is very important in scaffold printing. Real-time defect detection is very necessary on industry. In this paper, we proposed the method for real-time scaffold defect detection. Real-time defect detection model is produced using CNN(Convolution Neural Network) algorithm. Performance of the proposed model has been verified through evaluation. Real-time defect detection system are manufactured on hardware. Experiments were conducted to detect scaffold defects in real-time. As result of verification, the defect detection system detected scaffold defect well in real-time.

• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.88-93
• /
• 1999

This paper presents the experimental examinations and statistical quantitative analysis of the correlation between the cumulative counts of acoustic emission(AE) during plastic deformation periods of the welding and the tensile strength and other properties of the bar-to-bar welded joints of O.D. 16mm shaft(SM40C) as well as the various welding variables. And this is a new approach which attempts finally to develop real-time quality monitoring system for friction welding. The results lead to a practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro structural defects.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.716-719
• /
• 1999

In this paper, a real-time control system for robot manipulator is implemented using real-time operating system with capabilities of multitasking, intertask communication and synchronization, event-driven, priority-driven scheduling, real-time clock control, etc. The hardware system with VME bus and related devices is developed and applied to implement a dynamic learning control scheme for robot manipulator. Real-time performance of the proposed dynamic learning controller is tested for tasks of tracking moving objects and compared with the conventional servo controller.