• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.23-32
• /
• 1996

This paper proposes a new buffer management scheme to service delay-sensitive traffic and loss-sensitive traffic fairly in ATM networks. The proposed scheme uses tow buffers for delay-sensitive traffic and loss-sensitive traffic. To satisfy the average delay time of delay-sensitive traffic, cells in real-time buffer are served first. When congestion occurs in nonreal-time buffer, low loss priority cell in real-time buffer can be pushed out by high loss priority cell in nonreal-time buffer can be transferred to real-time buffer considering threshold value in real-time buffer. Using computer simulation, the existing methods and proposed scheme are compared and analyzed with respect to cell loss rate and average delay time. Simulation results show that the proposed scheme have superior performance to conventional schemes.

• Smart Structures and Systems
• /
• 제14권6호
• /
• pp.1081-1103
• /
• 2014

Real-time hybrid simulation (RTHS) has emerged as an important tool for testing large and complex structures with a focus on rate-dependent specimen behavior. Due to the real-time constraints, accurate dynamic control of servo-hydraulic actuators is required. These actuators are necessary to realize the desired displacements of the specimen, however they introduce unwanted dynamics into the RTHS loop. Model-based actuator control strategies are based on linearized models of the servo-hydraulic system, where the controller is taken as the model inverse to effectively cancel out the servo-hydraulic dynamics (i.e., model-based feedforward control). An accurate model of a servo-hydraulic system generally contains more poles than zeros, leading to an improper inverse (i.e., more zeros than poles). Rather than introduce additional poles to create a proper inverse controller, the higher order derivatives necessary for implementing the improper inverse can be calculated from available information. The backward-difference method is proposed as an alternative to discretize an improper continuous time model for use as a feedforward controller in RTHS. This method is flexible in that derivatives of any order can be explicitly calculated such that controllers can be developed for models of any order. Using model-based feedforward control with the backward-difference method, accurate actuator control and stable RTHS are demonstrated using a nine-story steel building model implemented with an MR damper.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.361-366
• /
• 2012

This paper analyzes the THD(Total Harmonics Distortion) according to output power fluctuation of photovoltaic(PV) systems using real time simulator. For being close to reality, the PV system including inverter and MPPT(Maximum Power Point Tracking) which composed of closed-loop using real-time simulator are modeled. The change of irradiance and temperature of PV module is modeled to consider the change of weather. The various simulations according to the weather conditions are performed and THD is calculated at each condition. In this paper, the results by off-line simulation are compared with the ones of real time simulation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.730-734
• /
• 2001

In this study in order to confirm the algorithms that are suggested from paper (I) as the experimental result, as the applied results of the hydraulic servo system are very strong a non-linearity of the fluid in the computer simulation, the real-time adaptive learning control algorithms is validated. The evolutionary strategy has characteristics that are automatically. adjusted in search regions with natural competition among many individuals. The error that is generated from the dynamic system is applied to the mutation equation. Competitive individuals are reduced with automatic adjustments of the search region in accord with the error. In this paper, the individual parents and offspring can be reduced in order to apply evolutionary algorithms in real-time as the description of the paper (I). The possibility of a new approaching algorithm that is suggested from the computer simulation of the paper (I) would be proved as the verification of a real-time test and the consideration its influence from the actual experiment.

• 해양환경안전학회지
• /
• 제29권1호
• /
• pp.67-75
• /
• 2023

본 연구에서는 동명대학교 조선해양시뮬레이션센터의 Real-time 조종 및 작업 시뮬레이터를 활용한 해양구조물 설치 작업 시뮬레이션을 통해 대상의 동적 특성 및 물리적 현상을 작업, 조종 사이의 상호 영향과 함께 분석한다. 8개의 계류삭에 의해 계류되는 반잠수식 시추선의 설치 작업 시뮬레이션이 실제 현장에서의 작업과 유사한 시나리오로 수행되었고, 시추선의 위치 제어를 위한 예인선 4척와 계류삭의 Hook-up 작업을 위한 해양플랜트 지원 선박 1척이 운용되었다. 설치 작업이 수행되는 동안 대상들의 운동과 이동 경로, 계류삭 및 예인줄에 가해지는 장력 등을 실시간으로 확인하였으며, 이를 작업 과정별로 구분하여 분석하였다. 작업과 조종 시뮬레이션이 동시에 수행된 본 연구로부터 특정 환경 외력하에서 설치되는 해양구조물과 이를 위해 운용되는 선박들의 작업 절차에 따른 세부적인 거동 및 작업·조종 간의 상호 영향을 확인하였고, 이는 해상 상태 등을 고려한 해양구조물 설치 작업의 수행 가능 여부를 판단하기 위한 근거로 활용될 수 있음을 제시하였다.

• 한국항공우주학회지
• /
• 제37권6호
• /
• pp.602-608
• /
• 2009

IEEE(Institute of Electrical and Electronics Engineers)1516 에 규정된 HLA(High Level Architecture) 기반 기술은 상이한 목적으로 개발된 다수의 개별 시뮬레이션들이 결합된 복합 시뮬레이션 네트워크 시스템을 구성하는데 있어서 필수적 요소이다. 본 논문에서는 상용 비행 시뮬레이션을 HLA를 기반으로 구현하는 과정과 구현된 시스템의 동작 과정을 보여줌으로써 확장성 및 상호 운용성을 갖춘 비행 시뮬레이션 모델 구조를 제시하였다. 또한 HLA를 기반으로 구현된 실시간 시뮬레이션 시스템과 상용 비행 시뮬레이션을 비교하여 얻어진 비행 정보 데이터 분석을 통해 완벽한 실시간성을 보장할 수 있는 지에 대한 여부를 판단하였다.

• 대한전기학회논문지
• /
• 제35권10호
• /
• pp.458-464
• /
• 1986

This paper introduces a method for design verification and performance evaluation of flight control system. The method is a real time hardware in the loop simulation using the hybrid computer and motion table facility. As a typical illustration, a roll control system of flight vehicle is applied. The simulation validity is demonstrated by comparing hardware test results with analog simulation results.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.8-17
• /
• 2008

This paper presents the Matlab/Simulink-based software-in-the-loop simulation(SILS) environment which is the co-simulator for temporal and functional simulations of control systems. The temporal behavior of a control system is strongly dependent on the implemented software and hardware such as the real-time operating system, the target CPU, and the communication protocol. The proposed SILS abstracts the system with tasks, task executions, real-time schedulers, and real-time networks close to the implementation. Methods to realize these components in graphical block representations are investigated with Matlab/Simulink, which is most commonly used tool for designing and simulating control algorithms in control engineering. In order to achieve a seamless development from SILS to rapid control prototyping (RCP), the SILS block-set is designed to support automatic code generation without tool changes and block modifications.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.17-21
• /
• 1989

6-DOE simulator system is designed to real-time processing for motion control, data acquisition, image generation and image processing etc.. In this paper, we introduce hardware and software design technologies for distributed processing, event-trapping, system monitoring and time scheduling procedure in 6-DOF simulator system design.

• 전자공학회논문지S
• /
• 제35S권1호
• /
• pp.1-13
• /
• 1998

The next generation of wireless network will be problably developed as a mobile communications which will support ATM-based multiMedium traffic. We need to develop an dffective MAC protocol in order to support multimedia traffic having variety of QoS characteristics on wireless neteworks. In this paper, we propose a MAC protocol a MAC protocol where mobile terminals having cells to transmit, request slots to base station through requested slot then the base station analyze parameters from mobile and allocate slots to mobile according to priority. The multimedia slot allocation(MSA) protocol divides multimedias applications into real-time/ variant and non real-time services. Entire slots of the frameare partitioned proportionallyby sizeof bandwidth according to types of services, so that related services can use allocated-slots in priority. The proposed algorithm guarantees real time operation since real-time service share slots allocated for non real-real services. The algorithm whih divides slots of the frame is called as an Algorithm A, otherwise as an Algorithm B. The simulation compares by average delay time and cell loss probability between Algorithm and Algorithm B by increasing number of mobile terminal using the proposed MAC protocol. the simulation result for real-time services shows that average delay time and cell loss probability of Algorithm A is better than those of Algorithm B.