• 한국인공지능학회지
• /
• 제11권4호
• /
• pp.21-27
• /
• 2023

This paper discusses a deep learning-based road surface analysis system that collects data by installing vibration sensors on the 4-axis wheel bearings of a vehicle, analyzes the data, and appropriately classifies the characteristics of the current driving road surface for use in the vehicle's control system. The data used for road surface analysis is real-time large-capacity data, with 48K samples per second, and the A2B protocol, which is used for large-capacity real-time data communication in modern vehicles, was used to collect the data. CAN and CAN-FD commonly used in vehicle communication, are unable to perform real-time road surface analysis due to bandwidth limitations. By using A2B communication, data was collected at a maximum bandwidth for real-time analysis, requiring a minimum of 24K samples/sec for evaluation. Based on the data collected for real-time analysis, performance was assessed using deep learning models such as LSTM, GRU, and RNN. The results showed similar road surface classification performance across all models. It was also observed that the quality of data used during the training process had an impact on the performance of each model.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.269-276
• /
• 2013

Information and communication technology (ICT) is a promising solution for mitigating road traffic congestion. ICT allows road users and vehicles to be managed based on real-time road status information. In Tanzania, traffic congestion causes losses of TZS 655 billion per year. The main objective of this study was to develop an optimal approach for integrating real-time road information (RRI) to mitigate traffic congestion. Our research survey focused on three cities that are highly affected by traffic congestion, i.e., Arusha, Mwanza, and Dar es Salaam. The results showed that ICT is not yet utilized fully to solve road traffic congestion. Thus, we established a possible approach for Tanzania based on an analysis of road traffic data provided by organizations responsible for road traffic management and road users. Furthermore, we evaluated the available road information management techniques to test their suitability for use in Tanzania. Using the floating car data technique, fuzzy logic was implemented for real-time traffic level detection and decision making. Based on this solution, we propose a RRI system architecture, which considers the effective utilization of readily available communication technology in Tanzania.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.35.4-35
• /
• 2001

Image detection system for road traffic data analysis is a real time detection system using image processing techniques to get the real-time traffic information which is used for traffic control and analysis. One of the most important functions in this system is to match the coordinates of real world and that of image on video camera. When there in no way to know the exact position of camera and it´s height from the object. If some points on the road of real world are known it is possible to calculate the coordinates of real world from image.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.962-965
• /
• 2002

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, Hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the algorithm and software to realize the real road profile are developed. The operation software for simultaneously controlled multi-axial simulator is developed and the input and output data are displayed window based PC controller in real time. The software to generate the real road profile are developed. This paper developed a road profile reappearance software and simultaneously apply 3-axial actuator to white noise, so we verified the propriety of reappearance software through accomplishes an real test.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.190-198
• /
• 2002

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the algorithm and software to realize the real road profile are developed. The operation software for simultaneously controlled multi-axial road simulator is developed and the input and output data are displayed window based PC controller in the real time. Futhermore, the software to generate the real road profile are developed. The validity of the software are verified by applying the belgian road, the city road, the highway, and the gravel road. The results of the above experiment show that the real road profiles are realized well after 10th iteration.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.79-82
• /
• 2005

Recently the necessity of road data is still being increased in industrial society, so there are many repairing and new constructions of roads at many areas. According to the development of government, city and region, the update and acquisition of road data for GIS (Geographical Information System) is very necessary. In this study, the fusion method with range data(3D Ground Coordinate System Data) and Intensity data in stand alone LiDAR data is used for road extraction and then digital image processing method is applicable. Up to date Intensity data of LiDAR is being studied. This study shows the possibility method for road extraction using Intensity data. Intensity and Range data are acquired at the same time. Therefore LiDAR does not have problems of multi-sensor data fusion method. Also the advantage of intensity data is already geocoded, same scale of real world and can make ortho-photo. Lastly, analysis of quantitative and quality is showed with extracted road image which compare with I: 1,000 digital map.

• 디지털융복합연구
• /
• 제18권4호
• /
• pp.221-228
• /
• 2020

산업 기술이 발달함에 따라 편리함을 추구하게 되면서 교통수단 역시 발달하고 있다. 대도시에 거주하는 많은 사람들은 버스, 택시, 자가용 등의 교통수단을 이용하여 출퇴근을 하고 있고 여가를 즐기므로 이동시 발생하는 교통사고의 피해를 줄이기 위한 연구가 필요하다. 본 연구는 실시간으로 도로단위 강우량을 추정하는 법을 다루고 있다. 이를 위해 기상청에서 제공하는 강우 관측 자료와 강우 레이더자료를 실시간으로 수집하여 통합 데이터베이스를 만들고 이를 크리깅 방법을 통해 도로단위 강우량으로 추정하였다. 이 외에도 도로의 실시간 교통소통정보도 강우정보와 융합하여 인터렉티브하게 시각화하는 연구를 수행하였다.

• 한국ITS학회 논문지
• /
• 제20권1호
• /
• pp.193-202
• /
• 2021

고정밀 지도의 갱신은 정사영상 또는 점군 데이터 등을 원천 자료로 하여 기하 정보를 우선적으로 수정한 이후 지도를 구성하는 공간객체들 간의 연관관계를 재정립하는 방식으로 진행된다. 이러한 일련의 과정들은 기하 정보를 처리하는 데에 많은 시간을 소요하므로 차량의 실시간 경로 계획(Real-time route planning)에 빠르게 적용되기 어렵다. 따라서 이 연구에서는 그래프 구조를 활용하여 경로 계획을 위한 도로 연결구조를 우선적으로 업데이트 하는 방식 및 도로 네트워크의 특징을 고려한 그래프 구조의 저장 유형을 제안하였다. 또한 제안된 방법을 실제 도로 자료에 적용해 봄으로써 실시간 경로 정보 전송 시의 활용 가능성에 대해 검토하였다.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제24권2호
• /
• pp.59-66
• /
• 2018

본 논문에서는 주행 중 가속도 센서와 카메라로부터 데이터를 실시간으로 수집, 분석하여 자동으로 도로 포장의 다양한 손상을 탐지하는 시스템을 제안한다. 제안하는 시스템은 도로의 포장 손상을 탐지하는 즉시 해당 이미지와 가속도 신호, GPS좌표를 도로관리자에게 전송하며 이를 서버에도 전송하여 데이터베이스에 이력화한다. 이를 통해, 도로 포장 손상 탐지 시스템은 도로관리자로 하여금 1) 신속, 정확, 편리하게 도로의 상태를 관리할 수 있게 하며, 2) 다양한 종류의 도로 포장 손상을 조기에 발견하여 관리할 수 있도록 하며, 3) 도로의 포장 손상을 추적 관리할 수 있도록 한다. 결과적으로, 제안하는 시스템은 10번의 고속도로 주행 실증 평가에서 평균 100 km/h로 주행 중 74%의 민감도와 84%의 정밀도로 도로 포장의 손상을 탐지하여 그 유효성이 입증되었다.