• The Journal of the Acoustical Society of Korea
• /
• v.31 no.5
• /
• pp.280-287
• /
• 2012

This paper presents a study on the experimental analysis of the impedance characteristics according to the rotational direction of the transmission beam of a cylindrical sensor array. Besides, this suggests a real time control technique of the transmitter output for the effective maximum power transmission, in order to drive efficiently the rotational transmission beam of the active sonar transmitter. The output characteristics of the transmitter and the real-time impedance variations of the sensor array are analyzed under the overload conditions. They are caused by electric and acoustic boundary conditions when the rotational transmission beam is operated. From these results, a new output control method of the transmitter is proposed to protect the transmitter and its loads. It can maximize the output power without the transmission pause even if the transient phenomena occur. The proposed technique is verified from the experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1077-1081
• /
• 2004

In this Paper we discuss an algorithm for a real-time transmission of moving color image on the TCP/IP network using wavelet transform and neural network. The Image frames received from the camera are two-level wavelet-transformed in the server, and are transmitted to the client on the network. Then, the client performs the inverse wavelet-transform using only the received pieces of each image frame within the prescribed time limit to display the moving images. When the TCP/IP network is busy, only a fraction of each image frame will be delivered. When the line is free, the whole frame of each image will be transferred to the client. The receiver warns the sender of the condition of traffic congestion in the network by sending a special short frame for this specific purpose. The sender can respond to this information of warning by simply reducing the data rate which is adjusted with a neural network or fuzzy logic. In this way we can send a stream of moving images adaptively adjusting to the network traffic condition.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.1
• /
• pp.95-101
• /
• 2009

Although the concept of RTLS is very unfamiliar to construction industry, recently it is popular in other industry, such as logistics, ship building, mobile telecommunication based on state-of-the-art information technology. Effective resource management using cutting-edge information technology makes it possible to succeed a project with saving the time and cost. And effective information management in construction project can be achieved by the new technologies such as RFID, WEB-based internet, DB technology, real-time monitoring technology, etc. This paper suggest the characteristics and applicability of the international standard electric waves to be used for the real-time locating system (RTLS) on the viewpoint of transmission loss in construction field to monitor and manage resources of construction project effectively The two types of electric waves based on the international standard is to be suggested after surveying the as-is technology in the related industries and then is analyzed to find out the characteristics of those by the concept of the electric wave transition loss in the several construction situations. Two main electric waves, the 2.4GHz and the 433MHz technologies as the international standard is researched on the applicability to the indoor environment of construction site.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.161-168
• /
• 2015

The epidemic is seemed to be extremely difficult for accurate predictions. The new models have been suggested that show quite different results. The basic reproductive number of epidemic for consequent time intervals are estimated based on stochastic processes. In this paper, we proposed a transmission distribution estimation for Ebola virus disease epidemic model. This estimation can be easier to obtain in real time which is useful for informing an appropriate public health response to the outbreak. Finally, we implement our proposed method with data from Guinea Ebola disease outbreak.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.3
• /
• pp.45-53
• /
• 2019

Moving image sharing technology has developed various servers and programs for personal broadcasting. In this paper, we propose the method of transmitting the multiple moving image, including the output channel of external streaming server. It also implements and tests multiple real-time broadcast channel automatic transmission systems that assign multiple output channels to automatic output channels. As a result of the experiment, it is easy to allocate moving image to broadcast channels that are output through the external streaming server's output channels regardless of the size of the streaming server, enabling the management of efficient output channels at the time of transmission of multiple moving image. The moving image can be provided through streaming method regardless of the type of moving image from the moving image provider terminal, and the moving image transmission can be controlled in various ways, including adding and changing channels for which the moving image is sent, and sending delayed to the moving image.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.965-973
• /
• 2019

In this paper, Stereo 4K@60fps 360 VR real-time video capture system which consists of video stream capture, video encoding and stitching module is been designed. The system captures stereo 4K@60fps 360 VR video by stitching 6 of 2K@60fps stream which are captured through HDMI interface from 6 cameras in real-time. In video capture phase, video is captured from each camera using multi-thread in real-time. In video encoding phase, raw frame memory transmission and parallel encoding are used to reduce the resource usage in data transmission between video capture and video stitching modules. In video stitching phase, Real-time stitching is secured by stitching calibration preprocessing.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.280-287
• /
• 2022

An open rack vaporizer is a facility that vaporizes liquefied natural gas using sea water. When a vaporization efficiency of the open rack vaporizer decreases, liquefied natural gas can leak, which can cause great damage to the facility. Operators have to monitor the operation state of the facility in real-time to prevent the accident. However, operators have visited the site and have checked the state by looking at the value of sensors installed in the open rack vaporizer through indicators. For the safe operation of the open rack vaporizer, a monitoring system is needed to monitor the operation state of the open rack vaporizer in real-time without the need for operators to visit the site. In this paper, we developed a long term evolution based monitoring system to monitor the operation state of the open rack vaporizer. The developed system can monitor the real-time operation state of the open rack vaporizer at a control center far from the facility. For the system development, data transmission infrastructure using long term evolution was built. Afterwards a software was developed to monitor the operation state of the open rack vaporizer in real-time using the transmitted data. Finally, performance evaluation was conducted to confirm that the developed system operated successfully without data transmission delay or data missing.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1259-1265
• /
• 2014

In this paper, the real-time attitude determination based Matlab using low-cost receivers was designed and evaluated. The GNSS attitude determination system was implemented to operation in real-time by TimerCallback in MATLAB. The TTM(Transmission Time Misalignment) of U-blox receiver was confirmed through zero baseline tests and this problem was revised. The computed attitude by the high-cost NovAtel receiver was compared to the computed attitude by the low-cost U-blox receiver. As a result of this, the performance of attitude determination systems by low-cost receiver was confirmed. To determine baseline, LAMBDA and BC-LAMBDA for integer ambiguities search methods were used. To confirm suitable integer ambiguity search method in real-time attitude determination algorithm, determined baselines by two methods were compared, and it was confirmed that BC-LAMBDA is more suitable. As a result of this, the operation of real-time attitude determination system was confirmed using 3 low-cost receivers.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.132-134
• /
• 2004

This paper proposes partial image encryption system for secure transmission of images. Partial image encryption is suitable for real-time processing purpose of multimedia data that needs compression and encryption. Compression part uses modified SPIHT algorithm and encryption part uses AES. Partial image encryption is significant reduction in encryption time in comparison with whole image encryption.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2815-2826
• /
• 2000

This paper describes the design and implementation of a CHILL Run-time System(CRS) that provides a running environments of real-time distributed software like as ATM switching software on host computers. To do this, we have proposed an execution model of real-time distributed CHILL proRrams and developed a CHS executinR the software of the execution model on host computers. Because CRS provides transparent runninR environments of target operating system, programmers are able to develop target system software without target system. As it provides an environment for multiple users running programs concurrently, it guarantees the improvement of program productivity. Originally, CRS has developed as a simulator of SROS. But it can be easily modified for other operating systems.