• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.190-192
• /
• 2009

Development of safety monitoring system for workers in the ship building industry is currently under progress using RFID(Radio Frequency IDentification) for successful development of the U-BUSS(Ubiquitous- Safety User Safety System). For decades, RFID technology has become a key technology to provide the real-time location system of worker and is variously used for safety monitoring system to increase productivity, improve the blasting quality and enhance the safety of working condition in the ship building industry In this paper, 2.45GHz band RTLS(Real Time Location System) technologies and the ubiquitous safety monitoring system of the ship yard's blasting cell are described.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.411-418
• /
• 2007

To analyze dynamic and long-term behavior of high speed rail system, and seismic measurements been installed at the various locations in the high speed rail system. Among these, 76 measurements were installed Chunan and Deajeon, and 80 measurements between Kwangmyung and Chunan. From these 156 measurements, real time data are continuously corrected and be sent to the main monitoring system to be used further analysis. These two systems were installed by different institution, and so there are not only basic differences in the system itself, but system running methods and data collecting/transferring methodology. There has been systematic difficulties due to these differences. This study shows the whole steps of high speed rail data monitoring systems include measurement equipment itself and data collecting/transferring system. study will proposed a more effective methods for collecting. This study also discuss the real time analysis method which can be used for future high speed rail monitoring system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.11-16
• /
• 1998

Condition monitoring technique used in the military is JOAP, for which the spectroscopic analysis is applied. However it is known that the technique has some problems in economical and practical point of view. This study introduces a new technique for measuring wear in real time base and applies the technique to a high power semi-automatic transmission. The results show the feasibility by measuring the concentration of ferrous wear particles from the transmission oil.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.705-712
• /
• 2009

The state changes of ocean covered over 70% of earth surface are one of the greatest factor of weather catastrophe. Recently weather extraordinary events are followed by steep increase of sea water temperature and scientists in various fields are studying and warning the weather changes. In this paper, floating buoy is developed to monitor ocean environments via Orbcomm satellite and a method is proposed to increase measurement accuracy of sea water temperature with common low price temperature sensor. Experimental results are presented to illustrate the usability and effectiveness of the developed system. A web-based real time monitoring system is built to monitor ocean environmental information such as sea and air temperature, salinity according to the position of buoy through the internet for user convenience.

• Journal of Sensor Science and Technology
• /
• v.23 no.2
• /
• pp.142-147
• /
• 2014

Real time driver's respiration monitoring method for detecting driver's drowsiness is investigated. The sensor to obtain driver's respiration signal was a piezoelectric pressure sensor attached at the abdominal region of the seat belt. The resistance of the pressure sensor was changed according to the pressure applied to the seat belt due to the driver's respiration. Monitoring driver's respiration was carried out by driving on the virtual road in a driving simulator from Cheonan to Seoul and monitoring results were compared to the PELCLOS. Experiment results show that the driver's respiration signal can be used for detecting driver's drowsiness.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2011

To enter next process control, numerous approaches, including run-to-run (R2R) process control and fault detection and classification (FDC) have been suggested in semiconductor manufacturing industry as a facilitation of advanced process control. This paper introduces a novel type of optical plasma process monitoring system, called plasma eyes chromatic system (PECSTM) and presents its potential for the purpose of fault detection. Qualitatively comparison of optically acquired signal levels vs. process parameter modifications are successfully demonstrated, and we expect that PECSTM signal can be a useful indication of onset of process change in real-time for advanced process control (APC).

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.8-11
• /
• 2010

During PEO (plasma-electrolytic-oxidation) treatment of titanium, the relationship between the thickness of oxide film and the measured electrical information was investigated. A simple real time monitoring method based on the electrical information being gathered during PEO treatment is proposed. The proposed method utilizes the current flowing from a high frequency voltage source to calculate the resistance of an oxide film, which is converted into the thickness of an oxide film. This monitoring method can be implemented in PEO system in which an oxide film is grown by constant or pulsed voltage/current sources.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.473-475
• /
• 2007

This paper shows a monitoring program, and this Exploiting monitoring program is a program for real-time monitoring the current and voltage which is produced by wind generators. And this program helps to check efficiency and situation of the wind generator; therefore, it uses LabVIEW for this real-time monitoring program. It is expensive that the specific network is needed in the common LD (long distance) data transmission. So in this paper, it shows the transmission method which use ezTCP/LAN (Serial-port${\leftarrow}{\rightarrow}$LAN-port converter) and combine with the TCP/IP based on LabVIEW. And in this method the specific network is not needed for using the Internet network to transmit the data, which can reduce the application cost of the system.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.21-27
• /
• 2018

This paper proposed the real-time monitoring methodology of a traffic signal controller. The proposed methodology is based on the simulation technology, and it is necessary to construct a simulation model imitating the behavior of a traffic signal controller. By executing the simulation model, we can obtain the 'nominal system trajectory' of the traffic signal controller. On the other hand, an IoT(Internet of Things)-based monitoring device is implemented in a traffic signal controller. Through the monitoring device, it is possible to obtain the 'actual system trajectory'. By comparing the nominal system trajectory and the actual system trajectory, we can estimate the degree of deterioration of a traffic signal controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.9
• /
• pp.1549-1559
• /
• 2010

Modern power system is operated and managed in closed network environment with treating a great variety of data, and requirement of real time power system data is more increasing. However, it is difficult for operators to fast evaluate the condition of power system using only isolation network system such as SCADA or EMS regarding unexpecting situations occurring. Recent technology achievement in areas of distributed computing, networking high speed communications and digital control as well as the availability of accurate GPS time source are rapidly becoming the enabling factors for the development of a new generation of real time power grid monitoring tools. In this paper, architecture of WAMAC which is the wide area monitoring and control system not only to control but also to monitoring in real time is proposed and the plan of integration interface with legacy system such as EMS for providing power system analysis base data effectively is suggested.