• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.236-251
• /
• 2020

As remote sensing technologies are evolving, and more satellites are orbited, the demand for using satellite data for disaster monitoring is rapidly increasing. Although natural and social disasters have been monitored using satellite data, constraints on establishing an integrated satellite-based near real-time disaster monitoring system have not been identified yet, and thus a novel framework for establishing such system remains to be presented. This research identifies constraints on establishing satellite data-based near real-time disaster monitoring systems by devising and testing a new conceptual framework of disaster monitoring, and then presents a feasible disaster monitoring system that relies mainly on acquirable satellite data. Implementing near real-time disaster monitoring by satellite remote sensing is constrained by technological and economic factors, and more significantly, it is also limited by interactions between organisations and policy that hamper timely acquiring appropriate satellite data for the purpose, and institutional factors that are related to satellite data analyses. Such constraints could be eased by employing an integrated computing platform, such as Amazon Web Services(AWS), which enables obtaining, storing and analysing satellite data, and by developing a toolkit by which appropriate satellites'sensors that are required for monitoring specific types of disaster, and their orbits, can be analysed. It is anticipated that the findings of this research could be used as meaningful reference when trying to establishing a satellite-based near real-time disaster monitoring system in any country.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.7
• /
• pp.227-234
• /
• 2015

USN-based real-time monitoring systems, which receive raw data from sensor nodes and store the processed information in traditional servers, recently get to be replaced by IoT(Internet of Things)/WoT(Web of Things)-based ones. Especially, Social Web of Things(SWoT) paradigm can make use of cloud storage over Social Network Service(SNS) and enable the possibility of integrated access, management and sharing. This paper proposes an improved SWoT-based real-time monitoring system which makes up for weak points of existing systems, and implements monitoring service integrating a legacy sensor network and commercial SNS without requiring additional servers. Especially, the proposed system can reduce emergency propagation time by employing PUSH messages.

• YAKHAK HOEJI
• /
• v.60 no.2
• /
• pp.85-91
• /
• 2016

Drying of granules for tablet formulation is one of the important unit operations. The loss on drying method is traditionally used for this purpose. However, it is a time-consuming method, requiring at least 1 h. Moreover, it is ineffective in monitoring the moisture content of granules during the drying process. In this study, online real-time monitoring of moisture content during the drying process was successfully performed using near-infrared (NIR) spectroscopy. NIR spectra were collected during 15 different drying batches for developing a reliable NIR spectroscopic method. Such a large number of batches were used to develop a more robust partial least squares (PLS) model. NIR spectra collected from 12 batches were used for developing the model that was validated by predicting the moisture content of the samples in the remaining 3 batches. The standard errors of predictions (SEPs) in the measurement of batch 1, batch 2, and batch 3 were 0.52%, 0.57%, and 0.56%, respectively. The online NIR spectroscopic method developed in this study was reliable and accurate in monitoring the moisture content during the drying process.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2003

Submarine optical fiber cable construction consists of marine survey, PLGR(Pre Lay Grapnel Run), shore-end-work, laying the submarine optical cable. This PLGR is work to ease the cable lay safely in seabed, improve the performance of Plough and ROV (Remotely-Operated Vehicle) laying work, and protect laying equipment. This paper presents the design and implementation of real-time monitoring system for PLGR work in submarine optical fiber cable construction enterprise. In this paper, we designe overall real-time monitoring system. For this purpose, the modules such as serial multiport communication module, real-time processing module, environment configuration module, real-time graph and a printout modules are designed and implemented. For the validity evaluation of this paper, serial multi port communication module, data parsing, realtime graph output are implemented and tested.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.459-465
• /
• 2022

This paper reports a method to use a wireless sensor network deployed in the field to real-time monitor soil moisture, warning when the moisture level reaches a specific value, and wirelessly controlling an additional device (LED or water supply system, etc.). In addition, we report all processes related to wireless irrigation system, including field deployment of sensors, real-time monitoring using a smartphone, data calibration, and control of additional devices deployed in the field by smartphone. A commercially available open-source Internet of Things (IoT) platform, NodeMCU, was used, which was combined with a 9V battery, LED and soil humidity sensor to be integrated into a portable prototype. The IoT-based soil humidity sensor prototype deployed in the field was installed next to a tree for on-site demonstration for the measurement of soil humidity in real-time for about 30 hours, and the measured data was successfully transmitted to a smartphone via Wifi. The measurement data were automatically transmitted via e-mail in the form of a text file, stored on the web, followed by analyses and calibrations. The user can check the humidity of the soil real-time through a personal smartphone. When the humidity of a soil reached a specific value, an additional device, an LED device, placed in the field was successfully controlled through the smartphone. This LED can be easily replaced by other electronic devices such as water supplies, which can also be controlled by smartphones. These results show that farmers can not only monitor the condition of the field real-time through a sensor monitoring system manufactured simply at a low cost but also control additional devices such as irrigation facilities from a distance, thereby reducing unnecessary energy consumption and helping improve agricultural productivity.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.3-8
• /
• 2022

Security threats occur from the outside, but more often from the inside. In particular, since the internal user knows about the information service, the security threat damage caused by the internal user is greater. In this environment, the actions of all users accessing information services should be monitored and recorded in real-time. However, the current operating system records only the logs of system and application execution, so there is a limit to monitoring user behavior in real-time. In such a security environment, damage may occur due to user's unauthorized actions. To solve this problem, this study proposes an architecture that monitors user behavior in real-time in a Linux environment. As a result of verifying the function to confirm the effectiveness of the proposed architecture, the console input values and output angles of all users who have access to the operating system are monitored in real-time and stored. Although the performance of the proposed architecture is somewhat slower than the identification and authentication functions provided by the operating system, it was confirmed that the performance was not at a level that users would recognize, and thus it was judged to be sufficiently effective. However, since this study focuses on monitoring the console behavior, it is impossible to monitor the behavior of user applications running in the background, so additional research is needed.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.4
• /
• pp.271-277
• /
• 2013

In spite of the emphasis on quality control in auto-industry, most of subcontract enterprises still lack a systematic in-process quality monitoring system for predicting the product/part quality for their customers. While their manufacturing processes have been getting automated and computer-controlled ever, there still exist many uncertain parameters and the process controls still rely on empirical works by a few skilled operators and quality experts. In this paper, a real-time product quality monitoring system for auto-manufacturing industry is presented to provide the systematic method of predicting product qualities from real-time production data. The proposed framework consists of a product quality ontology model for complex manufacturing supply chain environments, and a real-time quality prediction tool using support vector machine algorithm that enables the quality monitoring system to classify the product quality patterns from the in-process production data. A door trim production example is illustrated to verify the proposed quality prediction model.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.280-287
• /
• 2022

An open rack vaporizer is a facility that vaporizes liquefied natural gas using sea water. When a vaporization efficiency of the open rack vaporizer decreases, liquefied natural gas can leak, which can cause great damage to the facility. Operators have to monitor the operation state of the facility in real-time to prevent the accident. However, operators have visited the site and have checked the state by looking at the value of sensors installed in the open rack vaporizer through indicators. For the safe operation of the open rack vaporizer, a monitoring system is needed to monitor the operation state of the open rack vaporizer in real-time without the need for operators to visit the site. In this paper, we developed a long term evolution based monitoring system to monitor the operation state of the open rack vaporizer. The developed system can monitor the real-time operation state of the open rack vaporizer at a control center far from the facility. For the system development, data transmission infrastructure using long term evolution was built. Afterwards a software was developed to monitor the operation state of the open rack vaporizer in real-time using the transmitted data. Finally, performance evaluation was conducted to confirm that the developed system operated successfully without data transmission delay or data missing.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.7
• /
• pp.585-590
• /
• 2014

Recently, monitoring systems, such as POP, take a core role in scheduling or planning of manufacturing facilities for production, maintenance, and so on. Such monitoring systems require functionalities for real-time parameter monitoring and controlling to maximize efficiency of facilities. However, vendors usually do not provide internal communication protocols or interface to access the machine controller. Therefore, the values of parameters related to machine operations and controls cannot be easily accessed from external devices. In this paper, we propose an interface methodology for a real-time monitoring and controlling of injection molding machine parameters such as user input parameters, embedded sensor data and injection molding status information.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.213-219
• /
• 2015

Real-time energy monitoring systems is a demand-response system which is reported to be effective in saving energy up to 12%. Real-time energy monitoring system is commonly composed of smart-plugs which sense how much electrical power is consumed and IHD(In-Home Display device) which displays power consumption patterns. Even though the monitoring system is effective, users should themselves match which smart plus is connected to which appliance. In order to make the matching work to be automatic, the monitoring system need to have appliance identification algorithm, and some works have made under the name of NILM(Non-Intrusive Load Monitoring). This paper proposed an algorithm which utilizes multiple classifiers to improve accuracy of appliance identification. The algorithm proposes to understand each classifiers performance, that is, when a classifier make a result how much the result is reliable, and utilize it in choosing the final result among result candidates from many classifiers. By using the proposed algorithm this paper make 4.5% of improved accuracy with respect to using single best classifier, and 2.9% of improved accuracy with respect to other method using multiple classifiers, so called CDM(Commitee Decision Mechanism) method.