• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.16-21
• /
• 2015

본 논문은 두 가지 영상 이벤트 신호로 제어되는 실시간 차량하부 검사 엔진에 대해 제안한다. 첫 번째 영상 이벤트는 차량 번호판 인식에 의한 과정으로 생성된 것이고, 두 번째 영상 이벤트는 차량 하부 특정 이벤트 검출에 의해 생성된 것이다. 실험 결과, 두 영상 이벤트 모두 2.8초, 1.1초로 실시간 처리에 적합하게 발생되는 것을 확인할 수 있었고, 이러한 영상 이벤트가 시스템의 제어 체계로 사용되어 후부에 연결되는 다음 대응 상황에 적합한 신호를 보내주는 것으로 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.165-166
• /
• 2023

Construction inspection and monitoring are key activities in construction projects. Automation of inspection tasks improves the limitations and inefficiencies of manual construction inspections, enabling systematic and consistent construction inspections. In this paper, an RTSP (Real-Time Streaming Protocol) system is used to remotely manage and supervise the construction site without having to visit the construction site by deploying a robot on site on behalf of four construction stakeholders (owner, supervisor, constructor, and designer). I would like to propose. The proposed system can contribute to identifying and monitoring the process process and work results at the construction site in real time.

• Design & Manufacturing
• /
• 제14권2호
• /
• pp.21-27
• /
• 2020

Recently, LCD (Liquid Crystal Display) has been replaced by OLDE (Organic Light Emitting Diode) in high resolution display industry. In the process of OLDE production, it inspects defective products by sending a signal using a probe during OLED panel inspection. At this time, the cause of the detection of failure is divided into two. One is the self-defect of the OLED panel and the other is the poor contact occurring in the process of contact between the two. The second case is unknown at the time of testing, which increases the time for retesting. To this end, we made a system that can identify in real time whether the probe is in contact during the inspection. A contact probe unit was designed for the system, and a stage system was implemented. An inspection system was constructed through S / W and circuit configuration for actual inspection. Finally, a system that can check contact and non-contact in real time was constructed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.156-158
• /
• 2004

Film printing companies have many problems during a printing process. Most of all, even an insect or dirt stick to the transparent film may cause severe errors until the end of printing job, which means big economic damage to the company. To prevent some insect-dots or dirt-dots, we have to Inspect the total area of film. However, it is very difficult to inspect the film in real-time due to the high-speed of printing that usually more than 150 m/min. A hardware based approach, for example DSP-based approach can be the one of solution candidates, but the total cost and the complexity increases the very high-level. In this paper, we suggest a software based approach, using MMX technology, to inspect the film in real-time. By Many real-plant experiments, we can see the suggest approach is applicable for the inspection of food packaging film in real-time.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.56-61
• /
• 2000

We present a fast inspection method of machine vision for in-line quality assurance of liquid crystal displays(LCD) and plasma display panels(PDP). The method incorporates an optical spatial filter in the Fourier plane of the imaging optics to block the normal periodic pattern, extracting only defects real time without relying on intensive software image process. Special emphasis is on designing a collimated white light source to provide high degree of spatial coherence for effective real time Fourier transform. At the same time, a low level of temporal coherence is attained to improve defect detection capabilities by avoiding undesirable coherent noises. Experimental results show that the proposed inspection method offers a detection accuracy of 15% tolerance, which is sufficient for industrial applications.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.72-79
• /
• 2016

Uninterruptible power supplies are extensively used as backup power in various applications such as telecommunication systems, Internet data centers, hospitals, and military technologies. Some of these applications require a considerable number of batteries, and the maintenance of such batteries is critical for the reliability of a system. However, batteries are chemical energy storage devices that deteriorate over time and frequently inspecting their performance and suitability is difficult. A real-time remote battery inspection system that applies electrochemical impedance spectroscopy is proposed and implemented in this study. The proposed system consists of a small inspection circuit and software for control. The former is developed to monitor the impedance variation of the battery and to diagnose its state. The validity and feasibility of the proposed system is proven by experimental results.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.406-414
• /
• 1997

A real-time inspection system is developed using line scan cameras. Several improved algorithms are proposed for real-time detection of defects in this automated inspection system. The major improved algorithms include the preprocessing, the threshold decision, and the clustering algorithms. The preprocessing algorithms are for exact binarization and the threshold decision algorithm is for fast detection of defects in 1-D binary images. The clustering algorithm is also developed for fast classifying of the defects. The system is applied to PCBs(Printed Circuit Boards) inspection. The typical defects in PCBs are pits, dent, wrinkle, scratch, and black spots. The results show that most defects are detected and classified successfully.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7893-7901
• /
• 2015

공용중인 교량의 보다 안전하고 효율적인 유지관리를 위해서는 시간에 따른 교량 유지관리 정보의 수집과 분석이 중요하다. 교량관리시스템을 통한 안전하고 경제적인 관리를 위한 전략 수립의 기본이 되는 현장조사 정보의 신뢰도 및 획득의 편의성을 증진하기 위하여 교량 현장조사용 스마트폰 응용프로그램을 개발하고, 실 적용성을 확보하였다. 개발된 프로그램은 교량의 생애주기관리를 위한 교량관리시스템과 연계되어 유지관리 관련 정보의 조회, 수정, 전송 등이 실시간으로 가능하며, 현장조사 보고서의 자동 작성을 통해 업무를 크게 경감할 수 있을 것으로 판단된다. 본 프로그램을 이용한 점검은 편의성, 정확성 등의 향상, 정보의 지속가능성, 향후 활용성 등 직간접적으로 기대되는 가치향상 효과가 기존의 점검방법에 비해 매우 높을 것으로 기대된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.769-772
• /
• 1998

This paper present an efficient techniques for visual inspection of taped electronic parts, suitable for real time implementation. The main environments of developed system are IBM-compatible personal computer, frame grabber, digital input-output board. It is connected to the programmable logic controller unit of the taping machine in real time. Using a queuing structure, operator or extractor machine can remove easily the defect one from production line. Also, we design a new illumination system for sacquring shape and subface features of object. Therefore, it redue pre-processing step and processing time.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1999년도 춘계 학술발표회 논문집
• /
• pp.171-176
• /
• 1999

Nondestructive inspection and accompanying life analysis based on fracture mechanics were the major conventional methods for evaluating remaining life of critical high temperature components in power plants. By using these conventional methods, it has been difficult to perform in-service inspection for life prediction. Also, quantitative damage evaluation due to unexpected abrupt changes in operating temperature was almost impossible. Thus, many efforts have been made for evaluating remaining life during operation of the plants and predicting real-time life usage values based on the shape of structures, operating history, and material properties. In this study, a core software for on-line life monitoring system which carries out real-time life evaluation of a critical component in power boiler(high temperature steam headers) is developed. The software is capable of evaluating creep and fatigue life usage from the real-time stress data calculated by using temperature/stress transfer Green functions derived for the specific headers and by counting transient cycles. The major benefits of the developed software lie in determining future operating schedule, inspection interval, and replacement plan by monitoring real-time life usage based on prior operating history.