• 한국항행학회논문지
• /
• 제19권3호
• /
• pp.199-206
• /
• 2015

IGS에서는 실시간 정밀 측위에 사용할 수 있도록 궤도 예측값인 IGU (IGS Ultra-rapid)와 실시간 궤도 추정값인 RTS (real-time service) 보정정보를 제공한다. IGU는 데이터 지연시간이 없지만, RTS는 5~30 초의 지연시간을 갖기 때문에 실시간으로 사용하기 위해선 지연시간만큼 예측이 필요하다. 본 논문에서는 실시간 사용 측면에서 RTS와 IGU의 성능 분석을 수행하였다. 한반도 내에서 RTS 제공 비율을 파악하기 위하여 한반도에서 관측되는 위성 대비 RTS 제공 비율을 계산하였으며 그 결과 99.3%로 나타났다. RTS의 정확도를 확인하기 위해 보정정보를 방송궤도력에 적용하여 오차를 분석하였으며 이 때 3D 궤도 RMS 오차는 0.043 m으로 나타났다. 실시간 사용 측면에서 RTS와 IGU를 비교하였는데, 실시간으로 가정하였기 때문에 IGU는 예측 정보만 이용하였고, RTS는 데이터 지연시간동안 다항식 모델로 예측을 수행하였다. RTS와 IGU를 1초 간격으로 각각 외삽, 보간을 수행하였고 그 결과 궤도 예측 성능은 비슷하였으며 시계 예측 성능은 RTS가 0.13 m 더 뛰어났다.

• The Journal of Korean Physical Therapy
• /
• 제31권3호
• /
• pp.151-156
• /
• 2019

Purpose: This study aimed to investigate the immediate effects of posture correction and real-time visual feedback using a video display on muscle activity and change of head position during overhead arm lift test in individuals with forward head posture. Methods: Fifteen subjects with forward head posture and fifteen normal subjects who volunteered were included in this study. During both groups performed the overhead arm lift test, the muscle activity of the upper trapezius, serratus anterior, sternocleidomastoid, and lower trapezius muscle were measured using electromyography, and head position change was measured using photographs. Then, forward head posture group was asked to perform overhead arm lift test again after posture correction and real-time visual feedback using a video display respectively. One-way analysis of variance (ANOVA) was used to analyze four conditions: pre-test, posture correction, real-time visual feedback, and the control group. Results: The upper trapezius and lower trapezius muscle activity significantly decreased posture correction, real-time visual feedback, and control group than pre-test of forward head posture group (p<0.05). The sternocleidomastoid muscle significantly decreased real-time visual feedback and control group than pre-test of forward head posture group. Head position change significantly decreased three conditions than pre-test of forward head posture group and real-time visual feedback and control group significantly decreased than posture correction. Conclusion: This study recommend for maintaining cervical stability during the overhead arm lift test, postural control using real-time visual feedback is more effective in subjects with forward head posture.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.39-44
• /
• 2008

본 논문에서는 변형한 가능 곡면에 가상의 텍스쳐를 투영하기 위한 프로젝터 기반의 실시간 기하 보정 시스템을 제안한다. 다수의 대응점들의 위치를 추적하기 위하여 사용되는 마커들은 프로젝터의 영상이 투영되더라도 그 흔적이 남아있어서 투영 영상을 훼손한다. 또한 출력 영상의 사전 기하 보정 과정에서 병목 현상이 발생하기 때문에 실시간 기하 보정 시스템의 구현이 어렵다. 따라서 본 논문에서는 마커 인식 과정에서 마커에 의해 투영 영상이 훼손되는 현상을 막기 위해 눈에 보이지 않는 적외선 마커를 사용하며, NVIDIA의 Cg ToolKit을 이용하여 고속의 GPU 연산을 수행함으로서 자연스러운 실시간 보정 영상의 출력이 가능하다. 본 논문의 실험 결과에서는 눈에 보이지 않는 마커가 그려진 종이 위에서 사용자와의 상호 작용이 가능한 디지털 영상을 투영한다. 이를 통해 증강 현실 기반의 다양한 디지털 콘텐츠 제작이 가능하다.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3115-3123
• /
• 1993

This paper presents a real-time correction method of the movemont errors of a translatory precision machine axis. This method is a null-balances technique in which two plane mirrors are used to generate an interferometric fringe pattern utilizing the optical principles of TwymanGreen interferometry. One mirror is fixed on a reference frame, while the other is placed on the machine axis being supported by three piezoelectric actuators. From the fringe pattern, one translatory and two rotational error components of the machine axis are simultaneously detected by using CCD camera vision and image processing techniques. These errors are then independently suppressed by activating the peizoelectric actuators by real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with movement errors less than 10 nm in vertical straightness, 0.1 arcsec in pitch, and 0.06 arcsec in roll for 50mm travel by adopting the real-time correction method.

• 한국멀티미디어학회논문지
• /
• 제20권4호
• /
• pp.606-613
• /
• 2017

When the planar area is captured by the depth camera, the shape of the plane in the captured image has perspective projection distortion according to the position of the camera. We can correct the distorted image by the depth information in the plane in the captured area. Previous depth information based perspective distortion correction methods fail to satisfy the real-time property due to a large amount of computation. In this paper, we propose the method of applying the conversion table selectively by measuring the motion of the plane and performing the correction process by parallel processing for correcting perspective projection distortion. By appling the proposed method, the system for correcting perspective projection distortion correct the distorted image, whose resolution is 640x480, as 22.52ms per frame, so the proposed system satisfies the real-time property.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.209-214
• /
• 2019

Precise point positioning (PPP) requires precise orbit and clock products. International GNSS service (IGS) real-time service (RTS) data can be used in real-time for PPP, but it may not be possible to receive these corrections for a short time due to internet or hardware failure. In addition, the time required for IGS to combine RTS data from each analysis center results in a delay of about 30 seconds for the RTS data. Short-term orbit prediction can be possible because it includes the rate of correction, but the clock correction only provides bias. Thus, a short-term prediction model is needed to preidict RTS clock corrections. In this paper, we used a long short-term memory (LSTM) network to predict RTS clock correction for three minutes. The prediction accuracy of the LSTM was compared with that of the polynomial model. After applying the predicted clock corrections to the broadcast ephemeris, we performed PPP and analyzed the positioning accuracy. The LSTM network predicted the clock correction within 2 cm error, and the PPP accuracy is almost the same as received RTS data.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.1592-1596
• /
• 2007

Accuracy of flood forecasting is an important non-structural measure on the flood control and mitigation. Hence, combination of horologic model with real time error correction became an important issue. It is one of the efficient ways to improve the forecasting precision. In this work, an approach based on Kalman Filter (KF) is proposed to continuously revise state estimates to promote the accuracy of flood forecasting results. The case study refers to the Wi River in Korea, with the flood forecasting results of Xinanjiang model. Compared to the results, the corrected results based on the Kalman filter are more accurate. It proved that this method can take good effect on hydrologic forecasting of Wi River, Korea, although there are also flood peak discharge and flood reach time biases. The average determined coefficient and the peak discharge are quite improved, with the determined coefficient exceeding 0.95 for every year.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.224-227
• /
• 1999

This paper presents a design of the real-time preprocessor for CMOS image sensor suitable to the digital camera applications. CMOS image sensor offers some advantages in on-chip integration, system power reduction, and low cost. However, it has a lower-quality image than CCDs. We describe an image enhancement algorithm, which includes color interpolation, color correction, gamma correction, sharpening, and automatic exposure control, to compensate for this disadvantage, and present its efficient hardware architecture to implement on the real-time processor. The presented real-time preprocessor was designed using VHDL, and it contains about 19.2K logic gates. We also implement our system on FPGA chips in order to provide the real-time adjustment and it was successfully tested.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.9-12
• /
• 2000

A forward error correction (FEC) is usually used to correct the errors of the real-time data occurred at the reciever side which require a real-time transmission. The data transmission is peformed after being encapsulating by RTP and UDP. In the ITU-T study group 16, four FEC schemes using the XORing are presented. In the paper, a new supplementary scheme is proposed. In the delay problem the new scheme performs better than the scheme 3 but in the recovery ability for successive packet loss is worse than scheme 3. The proposed scheme which supplements the present schemes can be adapted easily to the current network environment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.291-291
• /
• 2002

DGPS(Differential Global Positioning System) and RTK(RealTime Kinematic) is in one of today's most widely used surveying techniques. But It's use is restricted by the distance between reference station and rover station and it is difficult to process data in realtime by it's own orgnizational limitation in precise measurement of positioning. To meet these new demands, In This paper, new DGPS and RTK correction data services through Internet and PSTN(Public Switched Telephony Network) have been proposed. For this purpose, we implemented performance a DGPS and RTK error correction data transmission system for long-distance using the internet and PSTN network which allows a mobile user to increase the distance at which the rover receiver is located from the reference in realtime. and we analyzed and compared DGPS and RTK performance by experiments through the Internet and PSTN network with the distance and the time.