• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2022

Vocal fold injection (VFI) is widely accepted as a first line treatment in treating unilateral vocal fold paralysis and other vocal fold diseases. Although VFI is advantageous for its minimal invasiveness and efficiency, the invisibility of the needle tip remains an essential handicap in precise localization. Real-time light-guided vocal fold injection (RL-VFI) is a novel technique that was developed under the concept of performing simultaneous injection with precise placement of the needle tip under light guidance. RL-VFI has confirmed its possibility of technical implementation and the feasibility in injecting the needle from various directions through ex vivo animal studies. Further in vivo animal study has approved the safety and feasibility of the procedure when various transcutaneous approaches were applied. Currently, RL-VFI device is authorized for clinical use by the Ministry of Food and Drug Safety in South Korea and is clinically applied to patients with safe and favorable outcome. Several clinical studies are currently under process to approve the safety and the efficiency of RL-VFI. RL-VFI is expected to improve the complication rate and the functional outcome of voice. Furthermore, it will support laryngologists in overcoming the steep learning curve by its intuitive guidance.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.1
• /
• pp.41-48
• /
• 2024

Objectives: Botulinum toxin type A (BTX), a powerful neurotoxin, can be an effective treatment choice for diverse muscular disorders and can reduce abnormal muscle activities. Abnormal movements of the mandible can be caused by involuntary and uncontrolled contractions of the lateral pterygoid muscle (LP) in various pathological situations. Previous reports have shown that BTX can reduce abnormal contractions of the LP. However, needle placement into the LP for BTX injection requires skill, experience, and sufficient anatomical knowledge. To place the needle precisely into the LP, ultrasonography (USG) can be used as an effective needle-guidance modality. USG is a non-invasive imaging modality able to create real-time images without any potential risks, including radiation exposure. Patients and Methods: The patients who had been performed USG-guided BTX injection into the LP using an intraoral approach were included in this study with a literature review and case presentations. Using the USG, four patients received BTX injections to treat recurrent temporomandibular dislocation and oromandibular dystonia resulting from involuntary LP activity. Result: Involuntary movements of the mandible were improved successfully in all patients, and showed satisfactory results without significant complication. Conclusion: The intraoral approach could prevent potential complications during needle placement. USG-guided BTX injection is an effective, convenient, and safe method that provides real-time imaging without unnecessary pain to the patient.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.4
• /
• pp.421-426
• /
• 2016

Fluid is normally used so that certain drug can be administered to patients for certain period of time. There are many incidents in which patients or guardians need to call upon medical staff after estimating the time of fluid injection termination. In case fluid injection is terminated during certain period such as sleeping time or others, it may cause more fatigue for either patients or guardians. Also, it may lead to ineffective work as medical staff needs to monitor the quantity of fluid several times in order to check the time of fluid injection termination. Therefore, the purpose of this study is to propose LBS system combined of minimum equipment and active RFID to monitor the level of fluid in order to solve abovementioned problems. Also, it is expected to enhance the quality of medical service with service in which real-time monitoring of fluid quantity and patient location is conducted to provide accurate information to either patients, guardians, or medical staff(nurse) so that medical staff can locate and see patients at the time of fluid injection termination.

• Korean Journal of Ichthyology
• /
• v.19 no.2
• /
• pp.88-92
• /
• 2007

The effect of dexamethasone injection on the burden of marine birnavirus (MABV) in asymptomatically infected olive flounder (Paralichthys olivaceus) fingerlings was investigated. In real time PCR analysis, the threshold cycle (Ct) value of the fish injected with dexamethasone was significantly lower than that of the fish in the PBS-injected and no-handling groups. The higher amplification of the MABV gene in the dexamethasone-injected group than the 2 control groups was confirmed also by semi-quantitative RT-PCR. The results indicate an increase of MABV burden in olive flounder fingerlings after a single injection with dexamethasone.

• Geomechanics and Engineering
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2021

In this study, a new approach using electrical resistivity measurement was proposed to detect grout penetration and to evaluate the grouting performance for such as waterproof efficiency in single rock fracture. For this purpose, an electrical resistivity monitoring system was designed to collect multi-channel data in real time. This was applied to a system for grout injection/penetration using a transparent fracture replica with various aperture sizes and water-cement mix ratio. The electrical resistivity was measured under various grout penetration conditions in real time, which results were directly compared to the visual observation images of grout penetration/distribution. Moreover, the grouting success status after the curing process was evaluated by measuring the electrical resistivity in relation to changes in frequency in fracture cells where grout injection and penetration were completed. Consequently, it was determined that the electrical resistivity monitoring system could be applied effectively to the detection of successful penetration of grouting into a target area and to actual field evaluation of the grouting performance and long-term stability of underground rock structures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.76-86
• /
• 2016

SQL Injection attacks are the most widely used and also they are considered one of the oldest traditional hacking techniques. SQL Injection attacks are getting quite complicated and they perform a high portion among web hacking. The big data environments in the future will be widely used resulting in many devices and sensors will be connected to the internet and the amount of data that flows among devices will be highly increased. The scale of damage caused by SQL Injection attacks would be even greater in the future. Besides, creating security solutions against SQL Injection attacks are high costs and time-consuming. In order to prevent SQL Injection attacks, we have to operate quickly and accurately according to this data analysis techniques. We utilized data analytics and machine learning techniques to defend against SQL Injection attacks and analyzed the execution plan of the SQL command input if there are abnormal patterns through checking the web log files. Herein, we propose a way to distinguish between normal and abnormal SQL commands. We have analyzed the value entered by the user in real time using the automated SQL Injection attacks tools. We have proved that it is possible to ensure an effective defense through analyzing the execution plan of the SQL command.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.36.3-37
• /
• 2009

This is an attempt to improve a formula to predict variations of geomagnetic storm indices (Dst) from solar wind parameters. A formula which is most widely accepted was given by Burton et al. (1975) over 30 years ago. Their formula is: dDst*/dt = Q(t) - Dst*(t)/$\tau$, where Q(t) is the Dst injection rate given by the convolution of dawn-to-dusk electric field generated by southward solar wind magnetic field and some response function. However, they did not clearly specify the response function. As a result, misunderstanding seems to be prevailing that the injection rate is proportional to the dawn-to-dusk electric field. In this study we tried to determine the response function by examining 12 intense geomagnetic storms with minimum Dst < -200 nT for which solar wind data are available. The method is as follows. First we assume the form of response function that is specified by several time constants, so that we can calculate the injection rate Q1(t) from the solar wind data. On the other hand, Burton et al. expression provide the observed injection rate Q2(t) = dDst*/dt + Dst*(t)/$\tau$. Thus, it is possible to determine the time constants of response function by a least-squares method to minimize the difference between Q1(t) and Q2(t). We have found this simple method successful enough to reproduce the observed Dst variations from the corresponding solar wind data. The present result provides a scheme to predict the development of Dst 30 minutes to 1 hour in advance by using the real time solar wind data from the ACE spacecraft.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.55-63
• /
• 1991

This paper deals with development of a Computer Aided Process Planning System based on knowledge base in addition to database for injection mold as a part of Computer Integrated Manufacturing System for injection mold manufacture. The prposed system consists of four modules such as manufacturing feature code generation module machine tool selection and sequencing module, operation and cutting tool selection mudule and standard time estimation module. The system is programmed by using Turbo Pascal on the IBM-PC/AT. The performance of the system is evaluated by using real problems and the test results indicate that the proposed system is a practical and efficient system.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.189-197
• /
• 2010

Recently, industrial business environments have rapidly changed and face severe competitive challenges. The effective inventory system enables to product and deliver the products quickly for meeting due date of customer's order in this environment. This study have developed a web-based inventory system framework using RFID for a plastic injection molding industry. The system analysis inventory problem issues such as inventory planning, warehouse assignment. In this study, web-based inventory system using Java language is proposed and implemented. As the result of implementation of the system, we expected that it manages to inventory planning continually and systematically.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.5 no.4
• /
• pp.26-31
• /
• 2008

This paper deals with the issue of position tracking control of a clamp-cylinder for injection moulding machine with electric-hydrostatic drives. A fixed displacement pump is utilized in combination with AC motor in order to directly control a clamp-cylinder. A clamp-cylinder may be required to operate under a variety of operating conditions. Therefore, robust control performance is important in position tracking control applications. In order to accommodate mismatches between the real plant and the model used for controller design, discrete-time sliding mode control is developed by combining a velocity feedforward loop. From tracking control experiments, it is shown that significant reduction in position tracking error is achieved through the use of sliding mode control.