• 한국지진공학회논문집
• /
• 제22권4호
• /
• pp.253-259
• /
• 2018

Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the substructuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.86-90
• /
• 2001

Demand of good seakeeping perfomace is increasing for sea going vessels such as cruisers, naval ships and container ships. Especillay roll motion is one of major concerns in evaluation of seakeeping performance due to its large resonace motion. Since large roll resonance motion is mainly arised from inherent small damping. use of additional mechnism to provide roll damping can significantly reduce roll motion. In this paper, a reliable performace evaluation method of fin stabilizer, which is very useful for stabilizing roll motion of mid and high speed vessls, is described. Model test and time domain simulation methods are adopted for performance evaluation in which real operating situation of fin stabilizer can be exactly modelled. Model test and simulation results show good correlations between model test and simulation results.

• 플랜트 저널
• /
• 제8권3호
• /
• pp.42-48
• /
• 2012

전통적 투자안 평가방법인 현금할인법(DCF:discounted cash flow) 모형의 투자안 평가는 경영자가 미래 사업환경의 변화에 능동적 대처를 할 수 없다는 가정이다. 그러나 현실에서는 투자를 수행하는 중에 새로운 정보가 유입되고 불확실성이 클 때 평가 시점에서 예측한 대로 시나리오가 이루어지기 어렵기 때문에 경영의 유연성을 고려하는 실물옵션 방법으로 평가함으로써 이런 난점들을 극복할 수 있다. 실물옵션에는 연기옵션, 단계적 투자옵션, 변경옵션, 포기옵션, 전환옵션 등이 있다. 따라서 사업 변동성이 클 경우 전통적인 DCF보다는 이러한 변동성이 갖는 가치를 적극 이용하여 평가하는 실물옵션 방법이 보다 바람직한 평가방법이라 할 수 있다.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.

• 비파괴검사학회지
• /
• 제15권4호
• /
• pp.511-519
• /
• 1996

Cr-Mo강인 SNCM220, SCM435, SACM645 및 SCM415 강봉을 사용하여 ${\phi}31.2$ 봉 대 봉 동종재 마찰용접의 최적 조건을 실험적으로 구하였으며, 이를 위하여 이음부의 인장강도와 마찰용접 변수와의 정량적 상관식을 실험적으로 도출하였다. 한편 마찰용접시 음향방출시험을 병행하여, AE 누적총량과 마찰용접변수, 마찰용접부의 인장강도와 AE 누적총량과의 정량적 상관성을 도출하였다. 그리고, 마찰용접부의 인장파단면을 검토함으로써 용접품질을 확인하였다.

• 한국음향학회지
• /
• 제8권5호
• /
• pp.95-101
• /
• 1989

일반 DSP들은 새로운 algorithm 및 응용 system의 개발을 위해서 전용 development system 및 simulator가 필수 불가결의 요소이다. 그러나 대부분 development system은 일반화된 내부 구조에 의해 그 유연성에 한계가 존재한다. 본 연구에서는 A/D입력과 D/A출력 data를 저장하는 buffer의 길이를 program에 의해 1 sample 단위부터 최대 2K sample 단위까지 가변할 수 있도록 하고, 이들 buffer도 2중 구조로 하여 연속 신호의 처리가 가능도록 한 DSP평가용 system을 개발하였다.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.154-157
• /
• 2010

In this paper, the Time-varying Failure Rates(TFR) of power distribution system components are extracted from the recorded failure data of KEPCO(Korea Electric Power Corporation) and the reliability of power distribution system is evaluated using Mean Failure Rate(MFR) and TFR. The TFR is approximated to bathtub curve using the exponential and Weibull distribution function. In addition, Kaplan-Meier estimation is applied to TFR extraction because of incomplete failure data of KEPCO. Also the reliability of the real power distribution system of Korea is evaluated using the MFR and TFR extracted from real failure data, respectively and the results of each case are compared with each other. As a result, it is proved that the reliability evaluation using the TFR is more realistic than MFR. In addition, it is presented that the application method at power distribution system maintenance and repair using the result of TFR.

• 한국주조공학회지
• /
• 제26권3호
• /
• pp.129-132
• /
• 2006

In the present study the new method was proposed by using the real-time X-ray observation and metal die in order to evaluate fluidity and viscosity of the molten metal during pouring into the mold. The special mold for the present experiment was introduced since X-ray could not transmit thick mold wall and scatter the image of the molten metal during pouring. The present study also discussed for evaluation of viscosities by using the flow data from radioscopy images, and the viscosities of six commercial aluminum alloys were evaluated and compared.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.51-60
• /
• 2002

In this study we developed the visualization scheme of spatial ground-motion measurements in real time by using DSS data. Even though this scheme itself is useful for national earthquake mitigation plans, this scheme could be served as the crucial core for constructing rapid earthquake damage evaluation system. DSS is the abbreviation of Data Subscription Service and this is the pre-assigned request for the seismic stations to send very limited brief data with high priority and negligible transmission load. In addition to visualize the damage area with intensity, the corresponding epicenter can be estimated roughly for quick event alarm. For the interpolation of spatially irregular PGA data, the program, named as surface. of GMT was used with NetCDF grid file format. Since the grid file is similar to a postscript file, the program, called as shading, was coded with C language by using Matpak library in order to convert grid files into image files.

• 한국항해학회지
• /
• 제25권3호
• /
• pp.247-256
• /
• 2001

This study aims to develop the information service system of integrated seakeeping performance for seagoing vessels. It has been successful in developing the intended system which has made possible to provide the following functions and capabilities. o immediate computation of the dynamic motions of a ship against the present and future weather conditions; o evaluation of the integrated seakeeping performance of a ship on a real time basis and providing the navigators with the seakeeping informations on the spot enabling them to take the most appropriate countermeasures; and o supporting the navigators in the selection of a safe sailing route by providing the integrate seakeeping performance.