• 디지털융복합연구
• /
• 제12권3호
• /
• pp.367-375
• /
• 2014

본 연구는 실시간 동적영상(Real-time dynamic image)을 획득할 수 있는 고해상도 엑스선 영상장치인 마이크로 CT 을 이용하여 흰쥐의 미세 혈관구조를 관찰함은 물론 국내 원광 방사선영상 과학연구 센터에서 개발한 마이크로 CT 에 대한 유용성을 알아보고자 한다. 흰쥐 몸 전체의 2D 영상을 얻은 후 MIP(maximum intensity projection), VRT(volume rendering technique)기법을 이용하여 혈관구조의 조영된 3D 영상을 얻을 수 있었고 이 3D 혈관 영상을 머리, 복부, 심장과 몸 전체의 혈관시스템으로 각각 분류하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.951-952
• /
• 2008

This paper proposes a new method for image composition which estimates the rotation angle of human hand and uses the reserved image in real-time camera images. First, we capture a background image and extract a interesting region by background subtraction. Next, we estimate the skin region from the interesting region and calculate the rotation angle of estimated skin region using PCA(Principal Components Analysis). Finally, we composite the reserved image for the calculated rotation angle in camera images. The proposed method can be applied to control the 3D avatar for marker-less augmented reality.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.1-6
• /
• 2023

In the realm of dental prosthesis fabrication, obtaining accurate impressions has historically been a challenging and inefficient process, often hindered by hygiene concerns and patient discomfort. Addressing these limitations, Company D recently introduced a cutting-edge solution by harnessing the potential of intraoral scan images to create 3D dental models. However, the complexity of these scan images, encompassing not only teeth and gums but also the palate, tongue, and other structures, posed a new set of challenges. In response, we propose a sophisticated real-time image segmentation algorithm that selectively extracts pertinent data, specifically focusing on teeth and gums, from oral scan images obtained through Company D's oral scanner for 3D model generation. A key challenge we tackled was the detection of the intricate molar regions, common in dental imaging, which we effectively addressed through intelligent data augmentation for enhanced training. By placing significant emphasis on both accuracy and speed, critical factors for real-time intraoral scanning, our proposed algorithm demonstrated exceptional performance, boasting an impressive accuracy rate of 0.91 and an unrivaled FPS of 92.4. Compared to existing algorithms, our solution exhibited superior outcomes when integrated into Company D's oral scanner. This algorithm is scheduled for deployment and commercialization within Company D's intraoral scanner.

• Restorative Dentistry and Endodontics
• /
• 제37권3호
• /
• pp.136-141
• /
• 2012

Objectives: The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Materials and Methods: Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results: The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions: These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.

• Journal of Yeungnam Medical Science
• /
• 제4권1호
• /
• pp.1-15
• /
• 1987

Magnetic Resonance (M.R.) is rapidly emerging technique that provides high quality images and potentially provides much more diagnostic information than do conventional imaging modalities. M.R.I. is conceptually quite different from currently used imaging methods. The complex nature of M.R.I. allows a great deal of flexibility in image product ion and available information, and key points are as follows. 1. M.R.I. offers a non-invasive technique with which to gene rate in vivo human images without ionizing radiation and with no known adverse biological effects. 2. Imaging mechanism of M.R.I. is quite different from conventional imaging modality and for more accurate diagnostic application, It is necessary for physician to understand imaging mechanism of M.R.I. 3. M.R. makes available basic chemical parameters that may provide to be useful for diagnostic medical imaging and more specific pathophysiologic information which are not available by alternate techniques. 4. M.R. can be produced by number of different methods. This flexibility allows the imaging technique to be applicated for particular clinical purpose. Multiplanar and three dimensional imaging may extend the imaging process beyond the single section available with current CT. 5. Future directions include efforts to; a. Further development of hard ware b. More fasternning scan time c. Respiratory and cardiac gated imaging d. Imaging of additional nuclei except hydrogen e. Further development of contrast media f. M.R. in vivo spectroscopy g. Real time M.R. imaging.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.387-390
• /
• 2017

임베디드 분야에서 고해상도 센서의 등장으로 Heterogeneous 컴퓨팅에 대한 수요가 지속적으로 증가하고 있다. 로직모듈은 LADAR 시스템 구성품을 제어하고, 고속의 레이저 영상 데이터를 실시간 3차원 영상화하기 위한 임베디드 시스템이다. 본 논문에서는 로직모듈의 설계와 CPU-GPU Heterogeneous 컴퓨팅을 활용한 로직모듈의 신호처리에 대해 설명하려고 한다.

• KIEAE Journal
• /
• 제10권4호
• /
• pp.3-8
• /
• 2010

Recently, various daylight evaluation methods for visual environment have been developed; simulation analysis methods, numerical calculation, and data monitoring methods. However, it is impossible for simulation analysis to make real scenes and visualize real images exactly. Also, a numerical calculation is considered as an out of date and time-consuming mean. Therefore, for acquisition of accurate results, many studies often use the monitoring data methods. Especially, most studies regarding discomfort glare are evaluated by measuring the physical quantity of luminance through traditional measuring Minolta Luminance meters as an instrument. But, this method has a difficulty in measuring several points at the same time because of the limitation of spaces and time when mapping. So, this study focused on the potential usefulness of High Dynamic Range photography technique as a luminance mapping tool. In order to evaluate the accuracy of proposed programs such as webHDR, Photomatix and PHOTOLUX, this paper has conducted an experiment by using Canon EOS 5D and NICON Coolpix8400 digital camera.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.181-186
• /
• 2017

Synthetic aperture radar(SAR) has been widely used for reconnaissance. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications. Because SAR coherently combines many viewing angles to effectively create a large aperture(narrow beam) radar, the test-bed should be capable of moving straightly SAR sensor for the integration angle to meet resolution. This paper describes the test-bed developed to test and evaluate the SAR performance. It forms high-quality images in real time and saves the raw data for the purpose of post processing on the ground.

• 방송공학회논문지
• /
• 제11권4호
• /
• pp.441-447
• /
• 2006

투시형 두부 장착형 디스플레이(HMD) 방식의 3차원 디스플레이는 스테레오스코픽 디스플레이에 의한 가상의 3차원 데이터와 실제 장면을 동시에 볼 수 있는 장점(MR-Mixed Reality)이 있다. 그러나 장시간 사용 시 눈의 피로현상이 발생한다. 또한 가상 데이터의 고정된 초점으로 인한 비초점화 현상이 발생한다. 이것의 중요한 요인 중 하나가 눈의 초점조절 능력 불만족이다. 이것의 해결방법으로 투시형 HMD에 초점조절 가능 3차원 디스플레이(다초점 3차원 디스플레이) 기술의 적용을 제안하였다. 결과적으로, 단안에서 현실세계의 물체에 대한 초점조절과 다초점에 의한 가상데이터의 초점조절이 일치함을 확인하였다.

• 전자공학회논문지S
• /
• 제35S권8호
• /
• pp.1-11
• /
• 1998

차세대 정보 통신 서비스의 고도화를 위해 추구되는 핵심 기술 중의 하나가 가시화를 통한 실감(Sensation of Reality) 서비스의 구현이다. 정보 통신 서비스의 가시화를 통한 실감화는 3차원 동영상 통신 기술의 개발없이는 구현이 불가능하다. 3차원 동영상 통신의 구현에 있어 가장 큰 문제점은 3차원 동영상에 포함된 많은 정보량을 전송할 수 있는 전송 기술과 3차원 영상을 촬영하고 실시간으로 표시할 수 있는 기술이 아직 확립되어 있지 않다는 것이다. 현재 확립되어 있는 3차원 동영상 기술은 주로 입체 방식(Stereoscopic Type)으로 실감을 얻기가 어렵다. 입체영상 보다 실감을 더해 주는 영상은 눈의 움직임과 함께 입체 영상이 연속적으로 변하게 하는 다시점(Multiview) 3차원 영상이다. 다시점 3차원 영상시스템을 8대의 카메라와 빔 프로젝터 그리고 홀로그래픽 스크린을 이용하는 시분할(Time Multiplexing) 방식에 의해 구현했다. 이 시스템에서 다시점 영상은 8대의 카메라에 의해 촬영되며, 이 촬영된 영상은 신호변환기에 의해 색상별로 한 개의 채널로 합성되어 초당 480 프레임 주파수로 빔 프로젝터에 의해 홀로그래픽 스크린에 투사된다. 빔 프로젝터의 영상은 띠형(Strip Type) 액정 셔터를 통해 홀로그래픽 스크린에 투사되게 되며, 이 띠형 액정 셔터는 홀로그래픽 스크린상에 투사된 영상을 볼 수 있게 시역을 형성한다. 각 카메라는 대응하는 띠형 액정 셔터들과 동기되어 움직이므로, 각 카메라의 영상은 대응하는 액정 셔터를 통해 투사하게 되어 시역에서는 다시점 3차원 영상의 시청이 가능해진다.