• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.117-119
• /
• 2002

In this paper, the geometry effectiveness and contact modes as functions of real contact length on a cap ring have been analyzed for high pressure sealing mechanism in reciprocating actuator. The reaction force and elastic strain energy density are very important parameters for analyzing the sealing performance of an ACGT ring seal. For the high pressure of 800bar and the maximum speed of 3m/s, the main piston is reciprocating along the linear line against the cylinder wall. The computed results indicate that the length ratio of a cap ring is more influential design parameter compared to that of the tribological contact mode. Thus, this paper recommends the discrete contact area rather than a conventional flat contact model. Especially, the sealing capacity is more improved when the length ratio of a cap ring is below 0.625.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2261-2267
• /
• 1992

The equations are derived for the evaluation of the axial contact force. The contact forces for rubber seals are analyzed as a function of the ratio of real contact length, the thickness of seal lip, the inclined angle of seal lip, and the interference between the edge of seal lip and the rotating inner ring. The design data for rubber seals are presented in terms of the ratio of real contact length, initial inclined lip angle, lip thickness and the interference. The calculated results show that the deflected interference and the circumferential stress cause considerable change of contcat forces for the low sealed pressure.

• Tribology and Lubricants
• /
• v.9 no.1
• /
• pp.32-37
• /
• 1993

The equations are derived for the evaluation of the axial contact forces. The contact forces of rubber seals are analyzed as a function of the ratio of real contact length, the thickness of seal lip, the inclined angle of seal lip, and the interference between the edge of seal lip and the rotating inner ring. The experimental apparatus is developed for the test of seal lip contact force. The data for designing rubber seals are presented in terms of the ratio of real contact length, initial inclined lip angle, lip thickness. and the interference. The results obtained from the derived equation for the contact force are in good agreement with the experimental results.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.940-945
• /
• 2009

This paper presents the design method of low order controller for the active pantograph of electric train system. The pantograph is the most playa role to supply constant current to the train. The design objectives are to have good tracking performance about reference contact force despite the stiffness variation that is like sinusoidal function concerned in train speed or span length of contact wire. In this paper, we consider stiffness variation from external disturbance of active pantograph to simplify model equation, and propose simple second-order controller which is designed by Characteristic ratio assignment(CRA) control method. Finally, we verify time response appling to model equation of real system and frequency response about parameter uncertainty like stiffness variation. it is performed by Matlab version 6.5 and Matlab simulink simulation.