• 대한전기학회논문지:전력기술부문A
• /
• 제48권6호
• /
• pp.699-703
• /
• 1999

It is known that the LDC(Line-Drop Compensator) becomes to lose the function of proper voltage regulation for its load currents due to the real and reactive power generated by DGS(Dispersed Generation System), when DGS is introduced into the power distribution system of which the voltage is controlled by LDC. Therefore, in that case, it is very difficult to regulate the distribution line voltage properly by using LDC. One possible solution for this problem is the real-time voltage regulation method which is to optimally regulate the sending-end voltage in real-time by collecting the real-time load data of each load data of each load section between measuring points and by calculating the optimal seding-end voltage value from them. For this, we must know the real-time load data of each load section. In this paper, a modeling method of representing a load section on high voltage line with DGSs as an equivalent lumped load is proposed for gaining the real-time load data. In addition a method of locating the measuring points is proposed. Then, these proposed methods are evaluated through computer simulations.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.445-455
• /
• 2016

실시간 철도안전 관제시스템은 철도시스템을 구성하는 열차, 신호, 전력 및 설비 등으로 분산되어 감시되던 시스템의 안전관련 데이터를 통합하여 안전감시 효율을 향상시키고 사고를 예방하는 것이 목적으로, 기존 개별 감시 시스템과 달리 데이터의 대용량 처리와 실시간 처리 성능을 동시에 요구하고 있다. 기존 관제시스템에서 주로 활용되는 디스크 기반 데이터베이스는 실시간 및 빅 데이터 처리기능이 없고, 최근 도입되는 메모리 기반 데이터베이스는 빅데이터 처리기능이 없으며, 시계열 데이터베이스는 실시간 처리 기능이 없다. 이에 따라, 실시간 안전관제에서 요구되는 빅 데이터 처리와 실시간 처리를 동시에 제공하는 새로운 솔루션이 필요하다. 본 연구에서는 기존 관제의 데이터 처리 사례를 분석하고, 빅 데이터 처리와 실시간 처리를 동시에 제공하는 새로운 데이터 처리 방안을 제안하였으며, 이를 검증하였다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.27-29
• /
• 2009

Real-time control of on-site construction, based on high quality data, is essential to identify discrepancies between actual and planned performances. Additionally, real-time control enables timely corrective measures to be taken when needed to reduce the damages caused by the discrepancies. The focus of the presentation will be on our work, which uses automated data technologies to collect data needed for real time control.

• 설비공학논문집
• /
• 제25권6호
• /
• pp.310-316
• /
• 2013

This study was designed to investigate a method for short-term, real-time energy demand prediction, to cope with changing loads for the effective operation and management of buildings. Through a case study, a novel methodology for real-time energy demand prediction with the use of weather forecasting data was suggested. To perform the input and output operations of weather data, and to calculate solar radiation and EnergyPlus, the BCVTB (Building Control Virtual Test Bed) was designed. Through the BCVTB, energy demand prediction for the next 24 hours was carried out, based on 4 real-time weather data and 2 solar radiation calculations. The weather parameters used in a model equation to calculate solar radiation were sourced from the weather data of the KMA (Korea Meteorological Administration). Depending on the local weather forecast data, the results showed their corresponding predicted values. Thus, this methodology was successfully applicable to anywhere that local weather forecast data is available.

• 인터넷정보학회논문지
• /
• 제19권4호
• /
• pp.1-6
• /
• 2018

스마트시티는, 각종 센서들로부터의 데이터를 수집, 처리하여 시민들을 위하여, 다양한 스마트 서비스들을 제공한다. 본 논문에서는, 이과 같은 스마트시티 서비스 중의 하나로서, 소음지도를 시민에게 실시간으로 제공하기 위한 연구 결과를 발표한다. 본 논문은, 스마트 시티의 융복합된 유비쿼터스센서네트워크들로부터 끊임없이 전달되는 대량의 스트림 데이터를, 실시간으로 전달받아서, 지리정보시스템 (GIS)의 정보들과 융합하여, 시각적으로 소음정보를 표시하여 주는, 3차원 소음지도를 실시간으로 제작하는, 실시간 분산병렬처리 방법론을 제시하였다. 이 방법론을 오픈소스소프트웨어를 활용하여 실제 시스템으로 개발되어 구현하였다. 본 논문에서는, 이와 같이 구현된 시스템들 중에서, 아파치 스톰(Apache Storm) 프레임워크를 사용하여 구현한 실제 시스템을 소개한다. 본 연구에서는, 이 실제 구현된 시스템을 성능평가하였다. 대량의 비정형 데이터를 실시간으로 처리하려면, 큰 컴퓨팅 파워가 필요하며, 필요한 컴퓨팅 파워의 규모도 사전에 알 수 없다는 문제들이 있다. 이 문제들을 해결하기 위하여, 본 연구에서는, 컴퓨팅 파워를 자유롭게 조절하여 공급할 수 있는. 클라우드 컴퓨팅을 사용하여 성능평가를 하였다. 이와 같은 성능평가를 통하여, 본 논문에서 제시한 방법론이 적절함을 확인하였고, 개발하여 구현한 시스템이 잘 작동함도 확인하였다. 나아가서는. 실시간으로 소음지도를 생산할 수 있음을 확인하였다. 본 논문은 이와 같은 성능평가 내용도 소개하고 상세히 설명한다.

• 대한의용생체공학회:의공학회지
• /
• 제16권3호
• /
• pp.271-278
• /
• 1995

An ECG data compression algorithM using max-min slope update is proposed and a real time 3 channel ECG transmission system is implemented using the proposed algorithm. In order to effectively compress ECG data, we compare a threshold value with the max-min slope difference (MMSD) which is updated at each sample values. If this MMSD value is smaller than the threshold value, then the data is compressed. Conversely, when the MMSD value is larger than threshold value, the data is transmitted after storing the value and the length between the data which is beyond previous threshold level. As a result, it can accurately compress both the region of QRS, P, and T wave that has fast-changing and the region of the base line that slope is changing slow. Therefore, it Is possible to enhance the compression rate and the percent roms difference. In addition, because of the simplicity, this algorithm is more suitable for real-time implementation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.777-779
• /
• 2003

This paper describes the real-time data linkage of the field control system for distributed control in nuclear power plant environment. The most important keys of digital control system in nuclear power plant are the reliability and stability of system, and real-time control ability. This Paper brought up the hardware construction using a new method about the design of each station located upon control transmission network to improve real-time ability of field control system, and measured the station binding time between devices connected to field control module. And it was confirmed performance improvement of overall system for real-time data linkage between control devices.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.85-90
• /
• 2016

In this paper, the biometric data is transmitted in real time from the IoT environment is runoff, forgery, alteration, prevention of the factors that can be generated from a denial-of-service in advance, and the security strategy for the biometric data to protect the biometric data secure from security threats offer. The convenience of living in our surroundings to life with the development of ubiquitous computing and smart devices are available in real-time. And is also increasing interest in the IOT. IOT environment is giving the convenience of life. However, security threats to privacy also are exposed for 24 hours. This paper examines the security threats to biological data to be transmitted in real time from IOT environment. The technology for such security requirements and security technology according to the analysis of the threat. And with respect to the biometric data transmitted in real time on the IoT environment proposes a security strategy to ensure the stability against security threats and described with respect to its efficiency.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2322-2327
• /
• 2009

Uncertainty of power system operation increases due to complexity and facilities diversification in the power system. Therefore the importance of SCADA(Supervisory Control and Data Acquisition) system which obtain and manage the actual data in real-time is very important. Accordingly in the studies of power system analysis, the efforts to include real-time power system analysis in simulation and applications are made in many ways. The real-time communication characteristics of SCADA system is considered so as to develop the power system analysis program that matches actual system conditions. The observation and management of SCADA system is realized by Intouch which is mainly used for factory automation and PSS/E(Power System Simulator for Engineers) provides real time system data. SQL DB and Python language is used for real-time communication between the softwares. It is very comfortable to use the various functions in Intouch WindowMaker.

• 한국통신학회논문지
• /
• 제25권10B호
• /
• pp.1675-1689
• /
• 2000

We present CReMeS a CORBA-compliant design and implementation of a new real-time communication service. It provides for efficient predictable and scalable communication between information producers and consumers. The CReMeS architecture is based on MidART's Real-Time Channel-based Reflective Memory (RT-CRM) abstraction. This architecture supports the separation of QoS specification between producer and consumer of data and employs a user-level scheduling scheme for communicating real-time tasks. These help us achieve end-to-end predictability and allows our service to scale. The CReMeS architecture provides a CORBA interface to applications and demands no changes to the ORB layer and the language mapping layer. Thus it can run on non real-time Off-The-Shelf ORBs enables applications on these ORBs to have scalable and end-to-end predictable asynchronous communication facility. In addition an application designer can select whether to use an out-of-band channel or the ORB GIOP/IIOP for data communication. This permits a trade-off between performance predictability and reliability. Experimental results demonstrate that our architecture can achieve better performance and predictability than a real-time implementation of the CORBA Even Service when the out-of-band channel is employed for data communication it delivers better predictability with comparable performance when the ORB GIOP/IIOP is used.