• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1149-1155
• /
• 1999

LEO(Low altitude Earth Orbit) Satellite systems have been utilized in the field of earth and scientific observation (cartography mission, ocean color monitoring, bioglogical coeanography, space environments observation by space physics sensor, and meteorological observation, atmospheric observation etc.), and the field of military (military communications and secret information, enemy reconnaissance etc.), and recently been developing in the field of mobile satellite commnication of GMPCS for commercial utilization. In Korea, KOMPSAT I satellite and ground system are been developing and planed to be lunched on October 1999 In this paper, the link budge of the TT&C system for LEO satellite is described and the relations between elevation angle and pass time of LEO satellite are calculated according to satellite moving. And the packet error rates of receiving data are derived three packet error rates(PER) of real-time(RT) mode, playback(PB) mode, and real-time and range tone(RT+RNG) mode are estimated according to pass time of satellite. The results of PER are the best at real-time and the worst at real-time mode and range mode at the all pass time of satellite. The average error free packet(EFP)s of real-time mode, playback mode, and real-time and range tone for the pass time of satellite are obtained as 99.999999%, 99.999912%, 99.995945% respectively. Therefore, transmission sequence of telemetry data are determined such as PER sequence according to pass time, namely, real-time, playback, and real-time and range mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1567-1576
• /
• 2015

This paper proposes a reliable real-time data dissemination protocol for mitigating transmission failure of real-time data in WSNs. The re-transmission is well-known for recovery of transmission failure, but this may violate the real-time requirement by transmission delay. To solve this problem, the proposed protocol exploits broadcasting nature and temporal opportunity allocation. In a radio-range of sending node, there may be neighbors satisfying the real-time requirement. The neighbors of specific node could receive data simultaneously by broadcasting, and decide their priority using temporal opportunity allocation method. The method uses time slot and tolerable time. The time slot specifies the priority and transmission deadline for each neighbors, and the tolerable time is the real-time requirement at the sending node. By giving the priority to the node with shorter tolerable time in each slot, we may get more opportunities to forward toward the destination. In other words, even if a node have the longer tolerable time, it still has a chance to forward with the real-time requirement. Simulation results show that the proposed protocol is superior to the existing protocols.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.82-85
• /
• 2004

This paper proposes the development of delay compensator to minimize performance degradation caused by time delays in network-based real-time control systems. The delay compensator uses the time-stamp method as a direct delay measuring method to measure time delays generated between network nodes. The delay compensator predicts the network time delays of next period in the views point of time delays and minimizes performance degradation from network through considering predicted time delays. Control output considering network time delays is generated by the defuzzification of probable time delays of next period. The time delays considered in the delay compensator are modeled by using a timed Petri net model. The proposed delay prediction mechanism for the delay compensator is evaluated through some simulation tests by measuring deviation of the predicted delays from simulated delays.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.8
• /
• pp.432-444
• /
• 2004

In this paper, we construct the TMO-based object group model on distributed environment, and analyze and evaluate the executability for distributed real-time service of our object group model by developing the distributed real-time application simulator applying the model. The Time-triggered Message-triggered Object(TMO) is a real-time server object having real-time property itself. The TMO-based object group is defined as a set of objects which logically reconfigured the physically distributed one or more TMOs on network by a given distributed application. For supporting group management of the server objects, the TMO-based object group we suggested provides the functions which register and withdraw the solver objects as a group member to an arbitrary object group, and also provides the functions which insert and delete the access rights of server objects from clients. Also, our model was designed and implemented to support the appropriate object selection and dynamic binding service for a single TMO as well as the duplicated TMOs, and to support the real-time scheduling service for the clients which are requesting the service. Finally, we developed the Defence System against Invading Enemy Planes(DSIEP) simulator as a practical example of distributed real-time application by applying our model, and evaluated the adaptability of distributed service strategies for the group components and the executability of real-time services that the TMO-based object group model provides.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.355-360
• /
• 2010

Vibrio parahaemolyticus (V. parahaemolyticus), which is commonly found in raw seafood, causes gastroenteritis in humans. Rapid and effective methods have been developed as culture methods require up to 5-7 days. In this study, real-time PCR was compared with the standard culture method for detecting V. parahaemolyticus in seafood and radish sprout samples. Five hundred grams of the samples were artificially contaminated with V. parahaemolyticus then divided into 20 samples. The samples were incubated in alkaline peptone water and then streaked onto thiosulfate-citrate-bile saltssucrose agar. Biochemical tests for suspicious colonies were performed using the API 20NE strip. In parallel, real-time PCR was performed targeting the toxR gene using the enrichment broth. The real-time PCR was sensitive in discriminating V. parahaemolyticus from other foodborne pathogens. The detection limit of the real-time PCR was $10^3\;CFU/mL$ in phosphate-buffered saline. Although the real-time PCR detected more positive samples (76 out of 180, 42%) than the culture method (66 out of 180, 37%), there was no significant statistical difference (p>0.05) between the two methods. In conclusion, real-time PCR assays could be an alternative to the standard culture method for detecting V. parahaemolyticus in seafood and radish sprouts, which has many advantages in terms of detection time, labor, and sensitivity.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1589-1592
• /
• 2003

Existing system management software solutions show limitations in time and space, as well as problems such as uncertain error messages, and also difficulty providing swift assistance or real time emergency support. Therefore, a wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone, Webpad) for instantaneous control. The implemented real time wireless remote control system provides remote server management functions, error or event message (unctions, log record functions, authentication function via mobile devices.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.12
• /
• pp.1580-1588
• /
• 1999

This paper evaluates the real-time performance of the Train Communication Network (TCN) that consists of WTB and MVB. A run-time scheduling algorithm for the hard-real time communication was proposed and its performance was evaluated. Also, a new addressing method and the adaptive tree algorithm were suggested to enhance performance. The overall performance was evaluated by computer simulation using Arena.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.831-836
• /
• 1990

Real-time implementations of active noise controller are proposed and tested. For compensation of time delay of feed-back path, the n-step ahead prediction is applied. And predicting source noise and reflection noise respectively, reflection noise can be cancelled. For real-time processing, the DSP56001(Digital Signal Processor) is used. Experimental results show that the proposed controller is stable and of good performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.187-187
• /
• 2000

This paper presents the comparison of Euler-Rodrigues quaternion and Euler Angles using attitude kinematics for aircraft flight simulation. It is hard for PC-Level to accomplish real-time simulation. The purpose of this paper is to accomplish real-time simulation of the aircraft dynamics modeling parts and the graphics parts. The computation time is more reduced in case of applying quaternions than Euler Angles. This paper provides a quaternions algorithm and it's applications for the real-time simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.96-101
• /
• 2010

Superconducting Magnetic Energy Storage (SMES) system is one of the key technologies to overcome the voltage sag, swell, interruption and frequency fluctuation by fast response speed of current charge and discharge. In order to evaluate the characteristics of over mega joule class grid connected High Temperature Superconducting (HTS) SMES system, the authors proposed an algorithm by which the SMES coil could be connected to the Real Time Digital Simulator (RTDS). Using the proposed algorithm, users can perform the simulation of voltage sag and frequency stabilization with a real SMES coil in real time and easily change the capacity of SMES system as much as they need. To demonstrate the algorithm, real charge and discharge circuit and active load were manufactured and experimented. The results show that the current from real system was well amplified and applied to the current source of simulation circuit in real time.