• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.63-68
• /
• 1990

The chemical ingredients such as $SiO_2,\;Al_2O_3,\;MgO,\;Fe_2O_3,\;CaO$ and $TiO_2$in silica minerals were determined by X-ray fluorescence spectrometry using a matrix correction method. The synthesized standards mixed with reagent grade oxides and the sample were diluted by fusing with 16 times $Li_2B_4O_7$. The matrix effects correlated among the ingredients were corrected by the empirical coefficient method based on the Lucas-Tooth and Pyne model. The analytical results showed relatively good agreement between the different sets of coefficients but were improved with increasing the number of standard. The accuracy of this method was also examined with the standard reference material of NIST.

• Environmental Analysis Health and Toxicology
• /
• v.26
• /
• pp.12.1-12.7
• /
• 2011

Objectives: Perchlorate is an emerging contaminant that is found everywhere, including various foods. Perchlorate is known to disturb the production of thyroid hormones and leads to mental disorders in fetuses and infants, as well as metabolic problems in adults. In this study, we attempted to establish an LC-MS/MS method for measuring perchlorate in dairy products and used this developed method to investigate perchlorate levels in Korean milk and yogurt samples. Methods: The developed method of perchlorate analysis requires a shaker and 1% acetic acid/acetonitrile as the extracting solvent. Briefly, the samples were extracted and then centrifuged (4000 rpm, 1hour), and the supernatant was then passed through a $Envi^{TM}$ Carb SPE cartridge that had been prewashed sequentially with 6 mL of acetonitrile and 6 mL of 1% acetic acid in water. The final volume of the sample extract was adjusted to 40 mL with reagent water and the final sample was filtered through a 0.20-${\mu}m$ pore size PTFE (Polytetrafluoroethylene) syringe filter prior to LC-MS/MS. Results: The average levels of perchlorate in milk and yogurt samples were $5.63{\pm}3.49\;{\mu}g/L$ and $3.65{\pm}2.42\;{\mu}g/L$, respectively. The perchlorate levels observed in milk samples in this study were similar to those reported from China, Japan, and the United States. Conclusions: The exposure of Koreans to perchlorate through the consumption of dairy products was calculated based on the results of this study. For all age groups, the calculated exposure to perchlorate was below the reference of dose (0.7 ${\mu}g/kg$-day) proposed by the National Academy of Science, USA, but the perchlorate exposure of children was higher than that of adults. Therefore, further investigation of perchlorate in other food samples is needed to enable a more exact assessment of exposure of children to perchlorate.

• Korean journal of food and cookery science
• /
• v.33 no.3
• /
• pp.300-306
• /
• 2017

Purpose: This study aimed to prepare sea tangle vinegar and test its applicability as a vinegar-based functional salad dressing in terms of physicochemical properties. Methods: Sea tangle vinegar was prepared by mixing sea tangle with sugar and vinegar and fermenting the mixture at room temperature for 3 months. The resulting sea tangle vinegar was examined for its physicochemical properties and antioxidant activity with brewed vinegar and persimmon vinegar as controls. Results: The sea tangle vinegar showed significantly higher viscosity than control vinegars, and shear thinning behavior that is typical for salad dressing containing polymers. In addition, storage modulus (G′) of sea tangle vinegar was relatively high in dynamic viscosity measurement while that of control vinegars remained negligible. Together with the high soluble solids content of sea tangle vinegar, rheological behavior indicates that sea tangle vinegar had soluble polysaccharides extracted from sea tangle, consequently leading to an increase in viscosity. Titratable acidity (TA) and pH were 2.52% and 3.58, respectively, which satisfies the TA and pH requirements for microbiological safety of a salad dressing. Absorbance at 285 nm and Folin Ciocalteu's reagent method revealed that sea tangle vinegar contained antioxidative phenolic compounds. Conclusion: This study demonstrates that sea tangle vinegar could be potentially developed as a vinegar-based functional salad dressing when combined with sensory evaluation in the future.

• Advances in environmental research
• /
• v.10 no.1
• /
• pp.59-86
• /
• 2021

Landfilling is the most commonly adopted method for a large quantity of waste disposal. But, the main concern related to landfills is the generation of leachate. The leachate is high strength wastewater that is usually characterized by the presence of high molecular recalcitrant organics. Several conventional methods are adopted for leachate treatment. However, these methods are only suitable for young leachate, having high biodegradability and low toxicity levels. The mature and stabilized leachate needs advanced technologies for its effective treatment. Advanced oxidation processes (AOPs) are very suitable for such complex wastewater treatment as reported in the literature. After going through the literature survey, it can be concluded that Fenton-based approaches are effective for the treatment of various high/low strength wastewaters treatment. The applications of the Fenton-based approaches are widely adopted and well recognized due to their simplicity, cost-effectiveness, and reliability for the reduction of high chemical oxygen demand (COD) as reported in several studies. Besides, the process is relatively economical due to fewer chemical, non-sophisticated instruments, and low energy requirements. In this review, the conventional and advanced Fenton's approaches are explained with their detailed reaction mechanisms and applications for landfill leachate treatment. The effect of influencing factors like pH, the dosage of chemicals, nature of reaction matrix, and reagent ratio on the treatment efficiencies are also emphasized. Furthermore, the discussion regarding the reduction of chemical oxygen demand (COD) and color, increase in biodegradability, removal of humic acids from leachate, combined processes, and the pre/post-treatment options are highlighted. The scope of future studies is summarized to attain sustainable solutions for restrictions associated with these methods for effective leachate treatment.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.17-24
• /
• 1994

The urinary excretion of ${\delta}$-aminolevulinic acid has been widely used as a measure of the biological effect of lead in lead exposed workers. It is usually measured by colorimetric method based on the color reaction of ALA-pyrrole with Ehrlich's reagent. But the results of ${\delta}$-ALA in urine by this method are somewhat artificially higher than expected due to the urinary ALA-like compound such as aminoacetone. On the other hand, the recently developed fluorometric HPLC method is very sensitive and specific for the measuring urinary ALA. In order to compare the data obtained by two methods and to investigate the interrelation between two methods, 117 lead workers with different lead exposure were checked urinary ${\delta}$-ALA, blood lead and other lead exposure related indices. The results obtained are as follows; 1. Urinary excretion of ${\delta}$-ALA by colorimetric method is 2.15 times higher than HPLC method in overall, revealing 2.47 times in workers of blood lead less than $20{\mu}g/dl$, 2.53 times in workers of blood lead $21-40{\mu}g/dl$ and 1.86 times in workers of blood lead over $41{\mu}g/dl$, respectively. 2. While the correlation coefficients of ${\delta}$-ALA measured by colorimetric method with blood lead and blood ZPP was 0.571 and 0.629, those of ${\delta}$-ALA measured by HPLC with blood lead and blood ZPP were 0.6l0 and 0.637. All the correlation coefficients were statistically significant, but there was no statistical difference of correlation coefficients between two methods. 3. The correlation coefficient of urinary excretion of ${\delta}$-ALA between two method was 0.838 without any correction, but it was 0.852 with the correction of specific gravity 1.024. 4. Simple linear regression of ${\delta}$-ALA measured by HPLC method on ${\delta}$-ALA measured by colorimetric method was (ALA-UPH)=-0.245+0.536 (ALA-UCO) without any correction and it was (SP ALA)=-0.525+0.598 (SP ALA-UCO) with the correction of specific gravity 1.024. With above results, it is recommended that the diagnostic criteria of ${\delta}$-ALA for lead poisoning needed to be revised if ${\delta}$-ALA is measured by HPLC rather than colorimetric method.

• Clean Technology
• /
• v.28 no.4
• /
• pp.323-330
• /
• 2022

Microfluidic paper-based analytical devices (μPADs) have recently been in the spotlight for their applicability in point-of-care diagnostics and environmental material detection. This study presents a double-sided printing method for fabricating 3D-μPADs, providing simple and cost effective metal ion detection. The design of the 3D-μPAD was made into an acryl stamp by laser cutting and then coating it with a thin layer of PDMS using the spin-coating method. This fabricated stamp was used to form the 3D structure of the hydrophobic barrier through a double-sided contact printing method. The fabrication of the 3D hydrophobic barrier within a single sheet was optimized by controlling the spin-coating rate, reagent ratio and contacting time. The optimal conditions were found by analyzing the area change of the PDMS hydrophobic barrier and hydrophilic channel using ink with chromatography paper. Using the fabricated 3D-μPAD under optimized conditions, Ni²⁺, Cu²⁺, Hg²⁺, and pH were detected at different concentrations and displayed with color intensity in grayscale for quantitative analysis using ImageJ. This study demonstrated that a 3D-μPAD biosensor can be applied to detect metal ions without special analysis equipment. This 3D-μPAD provides a highly portable and rapid on-site monitoring platform for detecting multiple heavy metal ions with extremely high repeatability, which is useful for resource-limited areas and developing countries.

• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.851-857
• /
• 2011

This study was conducted to develop a real time reverse transcriptase-PCR (RT-PCR) method for the detection of viable Enterobacteriaceae in milk using primers based on the genes of ribosomal proteins S11 and S13 and to determine effects of heating and subsequent treatments on the threshold cycle (Ct) of the real time RT-PCR. Total RNA was isolated from 17 strains of bacteria including 11 strains of Enterobacteriaceae suspended in milk using a modified Tri reagent method. SYBR Green Master Mix was added to the RNA and the mixture was subjected to the real time RT-PCR. The Cts of eleven type strains of the Enterobacteriaceae in milk ($10^7$ cells) in the real time RT-PCR ranged from 21.5 to 24.6. However, the Cts of Pseudomonas fluorescens, Acinetobacter calcoaceticus, and three gram-positive bacteria were more than 40. The real time RT-PCR detected as low as $10^3$ cells in agarose gel electrophoresis. The Cts increased from 22.0 to 34.2 when milk samples contaminated with Escherichia coli ($10^7$ cells/mL) were heated at $65^{\circ}C$ for 30 min. In addition, subsequent incubation at $37^{\circ}C$ for 6 and 24 h increased the Cts further up to 36.2 and 37.2, respectively. Addition of RNase A to the bacterial suspension obtained from the heated milk and subsequent incubation at $37^{\circ}C$ for 1 h increased the Cts to more than 40. The results of this study suggests that pretreatment of bacterial cells heated in milk with RNase A before RNA extraction might enhance the ability to differentiate between viable and dead bacteria using real time RT-PCR.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.114.1-114.1
• /
• 2011

Bioenergy production from lignocellulosic biomass and agriculture wastes have been attracted because of its sustainable and non-edible source. Especially, canola is considered as one of the best feedstock for renewable fuel production. Oil extracted canola and its agriculture residues are reuseable for bioethanol production. However, a pretreatment step is required before enzymatic hydrolysis to disrupt recalcitrant lignocellulosic matrix. To increase the sugar conversion, more efficient pretreatment process was necessary for removal of saccharification barriers such as lignin. Alkaline pretreatment makes the lignocellulose swollen through solvation and induces more porous structure for enzyme access. In our previous work, aqueous ammonia (1~20%) was utilized for alkaline reagent to increase the crystallinity of canola residues pretreatment. In this study, significant factors for efficient soaking in aqueous ammonia pretreatment on canola residues was optimized by using the response surface method (RSM). Based on the fundamental experiments, the real values of factors at the center (0) were determined as follows; $70^{\circ}C$ of temperature, 17.5% of ammonia concentration and 18 h of reaction time in the experiment design using central composition design (CCD). A statistical model predicted that the highest removal yield of lignin was 54% at the following optimized reaction conditions: $72.68^{\circ}C$ of temperature, 18.30% of ammonia concentration and 18.30 h of reaction time. Finally, maximum theoretical yields of soaking in aqueous ammonia pretreatment were 42.23% of glucose and 22.68% of xylose.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.499-503
• /
• 2001

A new simple, rapid and sensitive gas chromatographic technique for the determination of bisphenol-A in can materials, which is the major material of epoxy resin and polycarbonate polymer, is proposed. This method is characterised by derivatization of the bisphenol-A with a acylating reagent forming the acetate derivative to optimize the chromatographic property. The detection of bisphenol-A is performed based on GC/MS (gas chromatography/mass spectrometry). Several beverages were analyzed by the proposed method for the determination of bisphenol-A Bisphenol-A was assayed the range of $0.11{\sim}11.40{\mu}g/can$ from the can materials.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.426-432
• /
• 2007

We have developed a sensitive, one-step, homogeneous open sandwich fluoroimmunoassay (OsFIA) based on fluorescence resonance energy transfer (FRET) and luminescent semiconductor quantum dots (QDs). In this FRET assay, estrogen receptor-$\beta$ (ER-$\beta$) antigen was incubated with QD-labeled anti-ER-$\beta$ monoclonal antibody and AF (Alexa Fluoro)-labeled anti-ER polyclonal antibody for 30 minutes, followed by FRET measurement. The dye separation distance was estimated to be between $80\sim90\;{\AA}$. The present method is rapid, simple and highly sensitive, and did not require the bound/free reagent separation steps and solid-phase carriers. A concentration as low as 0.05 nM (2.65 ng/ml) receptor was detected with linearity ($R^2$ > 0.990). In addition, the assay was performed with commercial antibodies. This assay provides a convenient alternative to conventional, laborious sandwich immunoassays.