• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.471-472
• /
• 2007

현재 다양한 전압보상설비들이 전력계통에 적용됨에 따라 각 기기의 특성을 이용한 설비간 상호 작용을 통해 전력공급의 유연성을 확보하고 설비들의 효율적인 활용이 요구된다. 따라서 본 논문에서는 전압보상설비들[UPFC(Unified Power Flow Controller Shunt elements(Sh. Capacitor & Sh. Reactor) ULTC(Under Load Tap Changing)] 간의 협조제어 모델링 및 시뮬레이션을 통해 각 부하모선별전압 요구치를 만족하도록 계통의 전압을 제어 및 유지하는 방안을 제안하였다. 이는 기기의 성능향상과 급변하는 전력계통 상황에 능동적인 대처가 가능할 것으로 기대되고, 수용가에 양질의 전력 공급이 가능하게 될 것이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.267-268
• /
• 2019

제안하는 모듈을 기반한 고승압 및 고용량 DC/DC 컨버터는 직류 탭리액터를 인터리브드 형태와 결합한 승압형 컨버터를 모듈화하여 변압기 턴비를 작게 할 수 있고 스택을 통해 고승압에 유리하다. 연료전지 응용분야에 적용가능하며 추후 양방향제어를 통하여 전기자동차와 같은 견인구동 응용분야에도 적용할 수 있는 장점이 있다.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.748-757
• /
• 2007

본 논문은 대용량 유도전동기가 기동할 때 발생하는 큰 돌입전류로 인해 PCC(Point of Common Coupling)에 심한 전압 강하가 발생하게 되어 기동에 실패하는 문제를 해결하기 위해 대상 유도전동기의 기동 특성과 배전계통을 모델링하고 시뮬레이션을 수행함으로써 유도기 기동시에 전압저하 현상을 해석하였다. 문제가 되는 유도전동기는 2500KVA 용량의 펌프용 농형 유도전동기로 리액터 기동법을 채용하고 있다. 2500KVA 유도전동기 한대의 기동에는 문제가 없으나 기동 완료 후 PCC 전압이 다소 떨어진다. 하지만 추가로 동일 용량의 유도전동기가 기동하게 되면 PCC의 심한 전압강하로 기동에 실패하게 되는 문제가 발생하였다. 이러한 문제 해결을 위해 본 논문에서는 실제 기기의 기동시 토크-속도 곡선을 이용한 유도전동기의 기동 특성을 정확히 모델링하고 시뮬레이션을 수행하여 두 대의 대용량 유도전동기가 순차적으로 기동에 성공할 수 있는 적절한 전압보상 방안을 제안하였다. 본 논문에서 논의되는 대용량 유도전동기는 한국수자원공사의 취수장에서 운전되고 있으며 대상 유도전동기 및 배전계통은 PSCAD/EMTDC 소프트웨어를 사용하여 모델링 및 시뮬레이션을 수행하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.364-369
• /
• 2012

The development of solar thermal energy used adsorption desalination technology have been examined as a viable option for supplying clean energy. In this study, the modelling of the main devices for solar thermal energy used and adsorption desalination system was introduced. Silica gel type adsorption desalination system is considered to be a promising low-temperature heat utilization system. The design is divided into three parts. First, the evaporator for the vaporization of the tap water is designed, and then the reactor for the adsorption and release of the steam is designed, followed by the condenser for the condensation of the fresh water is designed. In addition, new features based on the energy balance are also included to design absorption desalination system. In this basic research, One-bed(reactor) adsorption desalination plant that employ a low-temperature solar thermal energy was proposed and experimentally studied. The specific water yield is measured experimentally with respect to the time controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times. Desalination is processes that permeate our daily lives, but It requires substantial energy input, powered either from electricity or from thermal input. From the environmental and sustainability perspecives, innovative thermodynamic cycles are needed to produce the above-mentioned useful effects at a lower specific energy input. This article describes the development of adsorption cycles for the production of desalting effects. We want that this adsorption system can be driven by low temperature heat sources at 60 to $80^{\circ}C$, such as renewable, solar thermal energy.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.689-697
• /
• 2012

This paper proposes a new coordinated voltage control scheme between STATCOM (Static Synchronous Compensator) and reactive power compensation devices, such as shunt elements(shunt capacitor and shunt reactor) and ULTC(Under-Load Tap Changer) transformer in a local substation. If STATCOM and reactive power compensators are cooperatively used with well designed control algorithm, the target of the voltage control can be achieved in a suddenly changed power system. Also, keeping reactive power reserve in a STATCOM during steady-state operation is always needed to provide reactive power requirements during emergencies. This paper describes the coordinative voltage control method to keep or control the voltage of power system in an allowable range of steady-state and securing method of momentary reactive power reserve using PSS/E with Python. In the proposed method of this paper, the voltage reference of STATCOM is adjusted to keep the voltage of the most sensitive bus to the change of loads and other reactive power compensators also are settled to supply the reactive power shortage in out range of STATCOM to cope with the change of loads. As the result of simulation, it is possible to keep the load bus voltage in limited range and secure the momentary reactive power reserve in spite of broad load range condition.

• 한국분말재료학회지
• /
• 제2권2호
• /
• pp.135-141
• /
• 1995

As the first step of study on fabrication of ceramic powders from phytoliths in rice, especially in rice husks, pulverization method of rice husks and the properties of milled rice husks were investigated. Impact methods, such as ball milling, were not meaningful for pulverizing elastic and thin fabric structure of rice husks. The most effective one was cutting method. In the present work, a rotating knife cutting method was applied to pulverizing rice husks. A 40-mesh screen was inserted under the rotating knives. The most portion of the milled powder was found in -50/+100 mesh section. Morphology of the milled rice husks revealed that the husks larger than 70 mesh were flake-like shape, at -70/+100 mesh section relatively equi-axed shape, at -170/+325 mesh section rod-like shape, and below 325 mesh section dust-like shape. Tap density of raw rice husks was about 0.1 $g/cm^3$, while those of milled rice husks were over $0.4 g/cm^3$. This meant that, for a given volume of reactor, raw material charge can be increased more that 4 times when using milled rice husks than unmilled one. True densities of unmilled and milled rice husks were higher than $1.4 g/cm^3$, and increased with decreasing milled sizes.

• 대한전기학회논문지
• /
• 제39권8호
• /
• pp.779-791
• /
• 1990

This paper presents a knowledge based system to solve reactive power/voltage control problem in a power system. A need is recognized for new methods to alleviate a bus voltage limit violation more quickly when a power system becomes an emergency state due to contingency. To cope with this object, a set of indices concept which is used to make bus order list of reactive power injection priority is introduced. A set of indices, based on the overall system conditions, consists of steady state stability index, reactive power transmittance indes, voltage severity index and generator fuel cost index. This scheme and empirical rules of the knowledge on the basis of the human expert result in fast decision-making of the reactive power compensation devices since only the amount of devices is determined by the inference in the knowledge based system when the voltage violation is detected. In this approach, control devices such as shunt capacitor (reactor), transformer tap settings and generator voltages are utilized. Also the developed system herein can be used to minimize control action taken or generator fuel cost according to the user's option on the weighting factor. The results of a case study are also presented.

• 경영과정보연구
• /
• 제2권
• /
• pp.47-73
• /
• 1998

According to the structural contingency theories, organizational structures are determined by such a contingency variables as organizational environment, technology, size, power and strategy. Therefore, many scholor believed that organizational effectiveness will be maximized in the condition of the fit between organizational structure and its contingency variables. But contingency theories have limitations in explaining of the manager's discretion by way of environmental determinism. In 1972, Child introduced strategic choice theory, and this perspective spurred significant, systematic studies of the influence of the managerial voluntary will on the organizational performance. Especially, the question of whether tap managers have an impact on business performance has been addressed by the strategic leadership theory that demonstrates strong associations between the characteristics of top managers, strategic orientation. Therefore, this study has investigated a theoretical literature and an empirical survey that explains the impact of top manger characteristics and organizational characteristics about strategic orientation. In order tn do that, this study develops a research model on the subjects, designed manager's characteristics, strategic typology. Managerial characteristics could be operationalized in terms of demographic measures. In this study, strategic orientation was classified using the Miles & Snow typology. This research model provides hypotheses. Hypotheses H1: The demographic characteristics of the tap manager will differ according to the types of strategic types. H2: The organizational characteristics of the firm will differ according to the types of strategic types. To test these hypotheses, this study conducted questionaire surveys on 108 firms in the Korea national wide. This study has utilized ANOVA, Chi-square analysis, cluster analysis, discriminant analysis for testing the hypotheses. The major findings of this study are summarized as follows. First, this study builds on the central tenent of cotingency theory in provide a comprehensive explanation of the process by which top manager's influence. Second, Manager's characteristics(demographics) are different from each other according to 4 strategic types(Prospector, Defender, Analyzer, Reactor). Third, Organizational characteristics are different from each other according to 4 strategic types. In conclusion, the major contributions of this study are to examine the development of a more comprehensive theoretical framework in the strategic leadership theory and to analyze their contingent relationships among managerial characteristics, organizational characteristics and strategic types in the context of Korea's industry.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.43-50
• /
• 1986

오염(汚染)된 원수내(原水內)의 biodegradable 한 유기물(有機物)의 제거(除去)를 위한 호기성(好氣性) 고정미생물막공법(固定微生物膜工法)의 적용가능성(適用可能性)을 확인하기 위하여 본(本) 연구(硏究)가 실시(實施)되었는데, 실험(實驗)은 파쇄(破碎)된 연탄재 또는 화강암을 매질(媒質)로 채운 충전상(充塡床)에 phenol과 무기성(無記性) 영양물질(榮養物質)을 용해(溶解)시켜 만든 합성원수(合成原水)를 주입(注入)함으로써 진행(進行)되었다. 실험결과(實驗結果)에 의하면 유입수(流入水)의 BOD 농도(濃度)가 50 mg/l 이하(以下)이고 체류시간(滯留時間)이 2.7 시간(時間)이었을 때 처리수(處理水)의 TBOD는 6 mg/l 이하(以下)로 유지되었으며, 처리수내(處理水內)의 SS가 응집(凝集)이나 여과(濾過) 등(等)의 재래식(在來式) 정수공법(淨水工法)에 의하여 제거(除去)될 수 있다는 점을 감안한다면 처리수(處理水)의 SBOD는 5 mg/l 이하로 유지될 수 있다. 처리수내(處理水內)의 SS가 낮은 BOD를 나타내었으므로 이들 SS가 대부분 부식질(腐植質)로 구성되었음을 알 수 있다. 이는 반응조내(反應槽內)의 미생물막(微生物膜)이 낮은 F/M 비 때문에 내호흡단계(內呼吸段階)에 있음을 뜻한다. 연구결과(硏究結果)에 따라, biodegradable한 유기물(有機物)로 오염(汚染)된 원수(原水)는 먼저 2~3시간의 체류기간을 가지는 호기성(好氣性) 고정미생물막반응조(固定微生物膜反應槽)로 전처리(前處理)함이 바람직스럽다.

• 한국식품과학회지
• /
• 제30권4호
• /
• pp.902-907
• /
• 1998

본 연구에서는 세포 고정화를 위해 기존의 고정화 방법의 단점을 보완하기 위하여 새롭게 개발된 GFM 시스템에 Paracoccus denitrificans를 고정화하여 물속의 nitrate를 분해하는데 적용하였다. 고정화 조건으로써 스폰지 구멍의 크기 20 P.P.I. (pore per inch)와 겔로서 alginate가 이미 최적의 조건으로서 선택되었다. 고정화 세포의 연속 nitrate 분해능력을 air-lift reactor내에서 측정한 결과, 물속의 nitrate함량이 증가함에 따라 분해능력이 증가함을 나타내었다. 또한 연속운전에서 본 시스템은 기존의 고정화시스템인 bead 겔포괄법과 비교할 때 $1.2{\sim}2.1$배 정도 분해능력이 향상되었다. 최고 nitrate 분해속도는 buffer를 함유한 medium에 있어서 177 mg/L h이었으나 buffer를 첨가하지 않은 경우에 있어서는 33 mg/L h이었다. 또한 저장안정성을 측정한 결과, $5^{\circ}C$에 저장하였을 때 분해능력은 16주간 거의 변화가 없었으며 고정화하지 않은 자유세포나 bead에 고정화된 세포에 비하여 저장안정성이 두드러지게 뛰어났음을 알 수 있었다.