• Applied Biological Chemistry
• /
• 제37권4호
• /
• pp.303-309
• /
• 1994

광합성세균을 이용한 농축산가의 소규모 가축 폐수처리공정 개발을 위한 연구의 일환으로 고농도에서 유기산의 자화율이 높은 Rhodopseudomonas palustris KK14를 사용하여 돈분폐수처리공정의 최적화를 flask-scale 및 laboratory-scale에서 실시하였다. 반연속식으로 실시한 flask-scale에서 광합성세균 반응조는 HRT 6일, 광합성세균오니량 5%(v/v), 반송오니량 10%(v/v)로 했을 때 안정된 83%의 COD 제거율 및 적절한 $4{\sim}5\;g/l$의 MLSS가 유지되었다. 산생성 반응조와 광합성세균 반응조의 working volume을 각각 5.2 l와 15 l로 scale-up한 실험실적 실험에서는 원폐수 대비 COD와 BOD의 제거율이 각각 95%와 96%를 나타냈으며 광합성세균 반응조의 COD 용적부하율 및 오니부하율은 각각 $3kg\;COD/m^3/day$와 1.1kg COD/kg MLSS/day를 유지함으로써 적당한 MLSS농도가 유지되었고 부가적으로 폐수처리가 진행되면서 악취가 제거되는 효과를 나타내었다.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.340-344
• /
• 2008

Electro-flotation (EF) was applied to a sequencing batch reactor process (SBR) in order to enhance solids-liquid separation. Solids-liquid separation was good enough in the SBR coupled with EF (EF-SBR) and it was possible to maintain the concentration of mixed liquor suspended solids (MLSS) high in the EF-SBR. Under moderate organic loading condition (COD loading rate: 6 g/day), control SBR (C-SBR) showed similar treatment efficiencies with the EF-SBR. Under high organic loading condition (COD loading rate: 9.6 g/day), the solids-liquid separation in the C-SBR was deteriorated due to proliferation of filamentous bulking organisms at high F/M ratio. However, the EF-SBR was operated stably and with the high MLSS concentration (above 4,000 mg/L) regardless of the organic loading conditions during overall operating period leading to the satisfactory effluent quality. Gas production rate of the electrodes was gradually decreased because of anodic corrosion and scale build-up at the surface of cathode. However it could be partially overcome by use of corrosion-proof electrode material (SUS-316 L) and by periodic current switching between the electrodes.

• 한국전산유체공학회지
• /
• 제2권1호
• /
• pp.93-108
• /
• 1997

This paper describes several computational results on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, buoyancy-driven flow in a lake, primary clarifier for water and waste water treatment, hood ventilation in workplace. cyclone combustor and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or RNG κ-ε models. A nonequilibrium turbulent reaction model is developed for the application of the chlorination process in the Dow thermal reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal operating condition of various environmental engineering system of interest.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.465-473
• /
• 2011

To find the optimum mixing ratio of WGS catalyst with $CO_2$ absorbent for SEWGS process, water gas shift reaction tests were carried out in a fluidized bed reactor using commercial WGS catalyst and sand (as a substitute for $CO_2$ absorbent). WGS catalyst content, gas velocity, and steam/CO ratio were considered as experimental variables. CO conversion increased as the catalyst content increased during water gas shift reaction. Variations of the CO conversion with the catalyst content were small at low gas velocity. However, those variations increased at higher gas velocity. Within experimental range of this study, the optimum operating condition(steam/CO ratio=3, gas velocity = 0.03 m/s, catalyst content=10 wt.%) to get high CO conversion and $CO_2$ capture efficiency was confirmed. Moreover, long time water gas shift reaction tests up to 20 hours were carried out for two cases (catalyst content = 10 and 20 wt.%) and we could conclude that the WGS reactivity at those conditions was maintained up to 20 hours.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.466-473
• /
• 2021

Fire protection is one of important issues to ensure safety and reduce risks of nuclear power plants (NPPs). While robust programs to shut down commercial reactors in any fires have been successfully maintained, the concept and associated regulatory requirements are constantly changing or strengthening by lessons learned from operating experiences and information all over the world. As part of this context, it is necessary not only to establish specific fire hazard assessment methods reflecting the characteristics of research reactors and educational reactors but also to make decisions based on advancement encompassing numerical analyses and experiments. The objectives of this study are to address fire simulation in the control room of an educational reactor and to discuss integrity of digital console in charge of main operation as well as analysis results through comparison. Three electrical fire scenarios were postulated and twenty-four thermal analyses were carried out taking into account two turbulence models, two cable materials and two ventilation conditions. Twelve supplementary thermal analyses and six subsequent structural analyses were also conducted for further examination on the temperature and heat flux of cable and von Mises stress of digital console, respectively. As consequences, effects of each parameter were quantified in detail and future applicability was briefly discussed. On the whole, higher profiles were obtained when Deardorff turbulence model was employed or polyvinyl chloride material and larger ventilation condition were considered. All the maximum values considered in this study met the allowable criteria so that safety action seems available by sustained integrity of the cable linked to digital console within operators' reaction time of 300 s.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.24-30
• /
• 1989

Prototype metal hydride chemical heat pump was constructed using $LaNi_{4.7}Al_{0.3}$ for high temperature hydride and $MmNi_{4.15}Fe_{0.65}Al_{0.2}$ for low temperature hydride, and the effects of operating conditions on the performace of heat pump were investigaed to find out the optimum operating condition. Operating variables considered in this work were cycling time, temperature of hot air blown to the high temperature reactor, the amount of hydrogen gas with which the system was charged initially, and the flow rate of air at both reactors. Power of heat pump increases monotonically as $T_h$ increases, and shows maxima at 4.8H/M and 15-25 min in $H_2$ charged and cycling time respectively. Power of heat pump increases as air flow rate increases at low flow rate, but saturates to some value confined by heat flow rate through the hydride bed, These all phenomena can be explained by the modified power equation.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.562-570
• /
• 1995

근래의 ABB/CE형 가압경수로들은, 정상운전 및 예상운전과도상태 중에 허용핵연료설계제한치가 위배되는 것을 방지하기 위하여, 노심 운전상태를 감시하는 디지탈노심감시계통, COLSS(Core Oper-ating Limit Supervisory System)를 보유하고있다. COLSS의 주요 기능 중 하나는. 측정되는 운전조건에 대한 최소 핵비등이탈률을 계산하여, 핵비등이탈에 대한 과출력여유도를 감시하는 것이다. COL-SS에서 최소 핵비등이탈률을 계산하는데 사용되는 CETOP-D 모델은 상세부수로분석코드인 TORC 모델에 대해 보수적으로 벤치마킹되며, 보정상수로서 고온집 합체의 입구유량인자를 사용하고 있다. 본 연구에서는 CETOP-D 입구유량인자를 가장 제한적인 운전조건에서 보수적인 단일 값으로 결정하는 ABB/CE 방법을 배제하고, 운전조건에 따른 CETOP-D 입구유량인자 변화를 상관식형태로 결정하는 “CETOP-D 입구유량인자 최적화기법”을 개발하였다. 개발된 방법을 영광 3,4호기 초기노심의 노심운전영역에 적용한 결과, 기존의 ABB/CE 방법에 비하여 정상운전영역에서 핵비등이탈에 대한 과출력여유도가 2% 가량 증가하였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.462-466
• /
• 2003

This study was conducted to examine the potential of biosparging process in removing diesel contaminated soil and groundwater. The experiment was carried out lab-scale biosparging reactor and the biodegradation rate of diesel was evaluated as function of air injection rate and pattern. When renter was operated as air injection rate of 1000$m\ell$/min and pulsed air injection(15min pulse, 15min downtime), DO concentration in the renter was higher than another operating condition. The evidence for biodegradation of diesel was the $O_2$ utilization and $CO_2$ product following the cessation of sparging. Especially, air injection rate of 2000$m\ell$/min and pulsed air injection(15min pulse, 15min downtime) enhanced the diesel biodegradation during the operating. After 120day, the biodegradation rate of diesel was decreased as the lack of carbon source.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.151-156
• /
• 2001

Experimental frictional and wear characteristics of silicon graphite materials is studied in this paper. Those specimens are lubricated with high temperature and highly pressurized water to simulate the same operating condition for the journal bearing and the thrust bearing on the main coolant pump bearing in the newly developing nuclear reactor named SMART(System-integrated Modular Advanced ReacTor). Operating condition of the bearings is realized by the tribometer and the autoclave. Friction coefficient and wear loss are analyzed to choose the best silicon graphite material. Pin on plate test specimens are used and coned disk springs are used to control the applied force on the specimens. Wear loss ana wear width are measured by a precision balance and a micrometer. The friction force is measured by the strain gauge which can be used under high temperature and high pressure. Three kinds of silicon graphite materials are examined and compared with each other, and each material shows similar but different results on frictional and wear characteristics.

• 대한지하수환경학회지
• /
• 제4권3호
• /
• pp.116-121
• /
• 1997

정화 효율과 운영상의 문제점을 파악하였다. 반응조 유입수 및 방류수에 대하여 현장에서 pH 및 Eh(산화환원전위)를 측정하였고 Cd, Pb, As, Zn, Cu, Fe, Al 및 Mn 등을 실험실에서 분석 하였다. 반응조 방류수에 대한 수질분석 결과 우분 및 석회석이 섞인 볏짚 반응조의 Cu, Zn, Fe, Cd, Al, Mn및 Pb의 정화효율(최대)은 98%, 100%, 99%, 100%, 97%, 61% 및 100%였고 이때 반응조의 수질환경은 pH 6 그리고 Eh 값이 -300 mV부근의 환원환경이었다. 그러나 시간이 경과함에 따라 Eh 값은 상승하였고 Al을 제외한 금속성분의 정화효율도 낮아져 반응조의 혐기환경유지는 금속성분의 정화에 매우 중요하였다. 반응조 시설을 운영한 결과 배관내의 산화물 Scale 및 기질물질의 부피 변화는 광산배수의 흐름을 방해하는 요소로 나타났다.