• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2515-2517
• /
• 1998

The micro fresnel lens(MFL) was modeled and fabricated on a XY-stage electrostatically driven by comb actuator. The modeled MFL was approximated as a step shape with 4-phase and 4-zone plate. The focal length and diameter of the MFL is 20mm and 912${\mu}m$, respectively. The XY-stage suspending the MFL is designed to generate a large static displacement up to about 20${\mu}m$. On SOI substrates, we first fabricated MFL using the RIE(reactive Ion etching) technology and then patterned and etched bulk silicon to make XY-stage. After the fabrication of all structures on top side of the SOI substrates. $Si_3N_4$ was deposited for passivation of all structures using PECVD(plasma enhanced chemical vapor deposition). All the MFL systems width comb drive actuator were released by KOH etching from the bottom side of the SOI wafer using double-sided alignment technique. In fabrication of MFL, a dry etching conditions is established in order to improve surface roughness and to control the etched depth.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.215-218
• /
• 2007

In this paper, amorphous semiconductor and insulator thin film are etched using reactive ion etcher. At that time, we experiment in various RIE conditions (chamber pressure, gas flow rate, rf power, temperature) that have effects on quality of thin film. The using gases are $CF_4,\;CF_4+O_2,\;CCl_2F_2,\;CHF_3$ gases. The etching of a-Si:H thin film use $CF_4,\;CF_4+O_2$ gases and the etching of $a-SiO_2,\;a-SiN_x$ thin film use $CCl_2F_2,\;CHF_3$ gases. The $CCl_2F_2$ gas is particularly excellent because the selectivity of between a-Si:H thin film and $a-SiN_x$ thin film is 6:1. We made precise condition on dry etching with uniformity of 5%. If this dry etching condition is used, that process can acquire high yield and can cut down process cost.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.60-63
• /
• 1999

Ta-Al 합금 박막의 건식식각에 대하여 조사하였다. $CF_{4}$ 기체를 이용한 반응성 이온 식각(Reactive Ion Etching, RIE)이 1:1 조성의 Ta-Al 합금 박막의 식각에 적용될 수 있음을 확인하였으며, 식각속도는 $67{\AA}/min$으로 측정되었다. 그리고 $CF_{4}$ 기체는 Ta-Al 합금 박막과 $SiO_{2}$ 층간에 선택성이 없다는 것이 확인되었으며, $SiO_{2}$ 층의 식각속도는 Ta-Al 박막의 경우보다 약 12배 빠른 $800{\AA}/min$으로 측정되었다. 그 외에 $CF_{4}$ 기체를 이용한 반응성 이온 식각에서는 Shiepley 1400-27 Photo Resist 보다 AZ 5214 Photo Resist가 더 안정적이라는 것이 조사되었다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.130-133
• /
• 2010

Although many structures based on $SnO_2$ nanowires have been demonstrated, there is a limitation towards practical application due to the unwanted contact potential between the metal electrode and the $SnO_2$ nanowire. This is mostly due to the presence of the native oxide layer that acts as an insulator between the metal contact and the nanowire. In this study the contact properties between Ti/Au contacts and a single $SnO_2$ nanowire was compared to the electrical properties of a contact without the oxide layer. RIE(Reactive Ion Etching) is used to selectively remove the oxide layer from the contact area. The $SnO_2$ nanowires were synthesized by chemical vapor deposition (CVD) and dispersed on a $Si/Si_3N_4$ substrate. The Ti/Au (20nm/100nm) electrodes were formed bye-beam lithography, e-beam evaporation and a lift-off process.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.516-521
• /
• 2001

Dry etching of Si wafer and $SiO_2$ layers was performed using He/Cl$_2$ mixture plasma by diode-type reactive ion etcher (RIE) system. For Si etching, the Cl molecules react with the Si molecules on the surface and become chemically stable, indicating that the reactants need energetic ion bombardment. During the ion assisted desorption, energetic ions would damage the photoresist (PR) and produce the bad etch Si-profile. Moreover, we have examined the characteristics of the Cl-Si reaction system, and developed the new fabrication procedures with a $Cl_2$/He mixture for Si and $SiO_2$-etching. The developed novel fabrication procedure allows the RIE to be unexpensive and useful a Si deep etching system. Since the etch rate was proved to increase linearly with fHe and the selectivity of Si to $SiO_2$ etch rate was observed to be inversely proportional to fHe.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.85-90
• /
• 1998

Reactive ion etching (RIE) of Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the could be used effectively to etch the Ta-Al alloy thin film. The etching rate of the thin film at a Ta content of 50 mol% was about 67$\AA$/min. No selectivity between the Ta-Al alloy thin film and SiO2 thin films was observed during the etching with the CF4 gas and the etching rate of the SiO2 layer was 12 times faster than that of the Ta-Al alloy thin film. In addition, it was observed that photoresist of AZ5214 was more useful than Shiepley 1400-2 in RIE with the CF4 gas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.600-602
• /
• 1995

Using the $O_2$ RIE process, 20{\mu}m$-height polyimide microstructures are fabricated. In LIGA-like process, metal microstructure can be formed by the electroplating using these polyimide microstructures as a plating mould. Reactive ion Etching technique using oxygen gas is used for the patterning of polyimide. The etching rate of the polyimide is increased with increased pressure and RF power. The anisotropic vertical sidewall can be obtained at low pressure, but the etched surface state is not so good yet. "Micrograss", which is formed during the RIE and disturbs uniform electroplating, can be removed effectively by the wet itching of the chromium sacrificial layer. More studies about the improvement of an etched surface state and the removal of microsgrass are needed.

• Transactions on Electrical and Electronic Materials
• /
• 제14권1호
• /
• pp.32-35
• /
• 2013

In this paper, a manufacturing process was developed for fabricating high-quality AlGaN/GaN high electron mobility transistors (HEMTs) on silicon carbide (SiC) substrates. Various conditions and processing methods regarding the ohmic contact and pre-metal-deposition $BCl_3$ etching processes were evaluated in terms of the device performance. In order to obtain a good ohmic contact performance, we tested a Ti/Al/Ta/Au ohmic contact metallization scheme under different rapid thermal annealing (RTA) temperature and time. A $BCl_3$-based reactive-ion etching (RIE) method was performed before the ohmic metallization, since this approach was shown to produce a better ohmic contact compared to the as-fabricated HEMTs. A HEMT with a 0.5 ${\mu}m$ gate length was fabricated using this novel manufacturing process, which exhibits a maximum drain current density of 720 mA/mm and a peak transconductance of 235 mS/mm. The X-band output power density was 6.4 W/mm with a 53% power added efficiency (PAE).

• 한국전기전자재료학회논문지
• /
• 제26권2호
• /
• pp.140-143
• /
• 2013

Lowering surface reflectance of silicon wafer by texturization is one of the most important processes to improve the efficiency of silicon solar cells. Generally, the texturing of crystalline silicon was carried out using alkaline solution. The average reflectance of this method was 11% at the wavelength between 400 and 1,000 nm. In this study, the wafers were first texturing by NaOH solution at $80^{\circ}C$ for 35 min. Then the wafers were texturing by $SF_6$ and $O_2$ plasma in RIE (Reactive Ion Etching). The average reflectance of two step texturing was reduced to below 5% at the wavelength between 400 and 1,000 nm.

• 센서학회지
• /
• 제6권6호
• /
• pp.430-436
• /
• 1997

SDB웨이퍼를 사용한 압저항 형태의 50 G용 가속도 센서를 실리콘 마이크로머시닝을 사용하여 제조하였다. 이 형태의 가속도 센서는 진동하는 사각형의 매스와 4개의 빔으로 구성되어 있다. 이 구조는 RIE를 이용한 건식식각과 KOH 용액을 이용한 습식식각을 이용하여 제조되었다. 정사각형의 보상구조가 매스 가장자리의 언더에칭에 기인하는 변형을 보상하기 위해 사용되었다. 제조된 센서는 인가된 가속도에 대하여 선형적인 출력전압특성을 보여주고 감도는 0에서 10 G까지 약 $88{\mu}V/V{\cdot}g$이었다.