• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.51-56
• /
• 1995

Cotton fabric was treated with acrylonitrile in t-butyl alcohol and then aminized by reduction of the resultant cyanoethyl cellulose with LiAIH4, under various temperatures and times. Aminized cotton fabric toras dyed with acid and reactive dye. Dyeability as to temperatures, pH, and color fastness were compared to the amiRe group content of treated cotton fabrics. The results of this study were as follow: 1. D.S of cyanoethyl cellulose has been increased by increasing treating temperatures and times. Maximum D.S of cyanoethyl cellulose was 1.45. By SEM and the tensile strength, the damage of the treated cotton was not observed. 2. Since aminized cotton has greater affinity on acid dye than untreated cotton, dyeability increased with the increase of amino group content, and the lower pH, $60^{\circ}C$. 3. Since amino group in aminized cotton changes surface charge of cotton, dyeability for reactive dye increased by increasing the amino group content. Optimum dyeability was obtained at pH 5-7, $40^{\circ}C$. And dyeability of the amine treated cotton increased with the NaCl conc. 4. Color fastness to washing & light of the amine treated cotton was very low except for the wash fastness of the reactive dye.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.40-46
• /
• 1985

The equilibrium sorptions of C.I. Reactive Blue 19 and C.I. Reactive Blue 19 and C.I. Acid Blue 138 on Silk fibroin were investigated in the range of 50$^{\circ}C$, 70$^{\circ}C$, 90$^{\circ}C$ and to the pH range from 2.0 to 10.5. The results obtained are summarized as follows: 1) The amount of sorption of reactive dye was increased with the decrease of pH in dyeing solution and temperature. The amount of fixation showed the maximum value to pH 8.5 and 70$^{\circ}C$. 2) In acidic region, the sorption behavior of acid dye was similar to that of reactive dye, and Langmuir adsorption constant was increased with the decrease of pH. 3) Langmuir constant of both dyes was decreased with the increase of temperature, while standard affinity was increased. 4) The reaction of both dyes was exothermic and the values of $\Delta$S$^{\circ}$ were positive. 5) It was found that the sorption behavior of dyes against Silk fibroin could be described as Langmuir adsorption and Nernst distribution in lower pH region.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.232-238
• /
• 2019

Polyethylenimine-crosslinked chitin (PEI-chitin) was developed as a biosorbent to effectively remove dyestuffs from dye-containing wastewater. A representative reactive dye, Reactive Orange 16 (RO16) was used as a model dye. The effect of pH, isotherm, kinetic and desorption experiments were performed to evaluate the adsorption/desorption ability of PEI-chitin for RO16. As a result, the maximum adsorption capacity calculated by the Langmuir model was 266.3 mg/g at pH 2, and the time needed for adsorption equilibrium was evaluated to be about 20, 60, and 240 min for 50, 100, and 200 mg/L, respectively. The desorption experiments were carried out using various eluents such as ammonia/ethanol mixture, NaOH, $NaHCO_3$, and $Na_2CO_3$, and the highest desorption rate was 75.24% in the ammonia/ethanol mixture.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.619-627
• /
• 2000

Biodegradation of the C. I. Reactive Blue 114 was investigated in an upflow anaerobic sludge blanket (UASB) reactor. Important parameters studied include dye concentration, the kind and concentration of carbon source, hydraulic retention time (HRT), and influent pH. Glucose was found to be a better co-substrate than the mixture of volatile fatty acids (VFAs), although its concentration did not affect dye removal efficiency in the range of $1000{\sim}3000mg/{\ell}$. When HRT increased from 6 hr to 24 hr, dye removal efficiency increased up to 12 hr and remained almost constant thereafter at about 40%. When influent pH was varied in the range of 6.0~8.0, the effluent pH was varied in the range of 6.8~7.5 with maximum efficiency at pH 7.0. The highest dye removal rate obtained was $52mg/{\ell}{\cdot}day$, while the maximum dye load to meet the discharge limit of color intensity was estimated to be $46mg/{\ell}{\cdot}day$ at HRT of 12 hr and an influent glucose concentration of $2200mg/{\ell}$.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.332-340
• /
• 2010

Nowadays natural textile materials should cope with the global warming. Soft, thin and light angora fibers which have two components. One is spiky hair and the other is soft hair. The spiky hairs have a disadvantage of pilling out. The soft hairs have promising properties comparable to cashmere goat hairs, which is cheap compared to very expensive cashmere goat hairs. In this study, we investigated the dyeing properties of angora/PET, Nylon blend fabrics to acid dyes and reactive dyes including various series of acid dyes and reactive dyes for the dyeing of the blended super soft angora fabrics and their potential for deep shade dyeing effects. Our focus is to get a relation between various kind of blend and their dyeability.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.66-72
• /
• 2008

The photocatalytic degradation of a textile diazo dye in aqueous solution has been investigated under Solar and UV-A light. The effect of various parameters such as concentration of dye, amount of catalyst and pH on the degradation of dye has been studied. Addition of hydrogen peroxide, ammonium persulphate and isopropanol strongly influences the degradation rate. Kinetic analysis of photodegradation reveals that the degradation follows approximately pseudo first order kinetics according to the Langmuir-Hinshelwood model. Carbon dioxide, nitrate and sulphate ions have been identified as mineralisation products. The photocatalyst ZnO was found to be more efficient in UV-A light than in Solar light.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.425-432
• /
• 1984

We obtained fast dyed polypropylene fiber, which has no functional group to be dyed, by producing a carbene on the dye molecule by the pyrolysis of lithium salt of dye molecule-tosylhydrazone, then the carbene simultaneously inserted into a C-H bond of polypropylene. To investigate the possibility of actual use in the industry, a variety of reactive azo dyes were prepared from aldehyde, acetophenone and benzophenone derivatives by changing reactive site of precursors which greatly affected properties of dyes. Reactive dyes of the benzophenone derivatives were excellent in the reaction with polypropylene, especially, a dye prepared from chloroaminobenzophenone with N,N-dimethyl aniline was found most excellent.

• Journal of Sericultural and Entomological Science
• /
• v.25 no.2
• /
• pp.58-64
• /
• 1984

Silk fabric was printed with the reactive dyes (mono and di-chlorotriazinyl type) in order to investigate the change of adsorption and fixation by steaming time, viscosity of dyeing paste, and alkali concentration. It was found that the amount of adsorption and fixation of mono-chlorotriazinyl type dye increased with the increase of steaming time, while di-chlorotriazinyl type dye showed the maximum uptake at 20 minutes. The amount of dye uptake of each dye showed the maximum value at 340 cp of dyeing paste. The light fastness of each dye was poor but the washing fastness was excellent.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.174-183
• /
• 2023

The dye wastewater discharge from the textile industries mainly affects the aquatic environment. Hence, the treatment of this wastewater is essential for a pollutant-free environment. The purpose of this research is to optimize the dye removal efficiency for process influencing independent variables such as pH, electrolysis time (ET), and current density (CD) by using Box-Behnken design (BBD) optimization and Genetic Algorithm (GA) modelling. The electrocoagulation treatment technique was used to treat the synthetically prepared Reactive Black dye solution under batch mode potentiometric operations. The percentage of error for the BBD optimization was significantly greater than for the GA modelling results. The optimum factors determined by GA modelling were CD-59.11 mA/cm², ET-24.17 minutes, and pH-8.4. At this moment, the experimental and predicted dye removal efficiencies were found to be 96.25% and 98.26%, respectively. The most and least predominant factors found by the beta coefficient were ET and pH respectively. The outcome of this research shows GA modeling is a better tool for predicting dye removal efficiencies as well as process influencing factors.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2135-2139
• /
• 2000

The coagulation of anionic colloidal particles by the cyanoguanidine(CG)-formaldehyde resin has been reported to be caused by an electrostatic interaction of the diaminomethylene urea (DU) cation with an anionic surface charge of particles. In this research, 100~500 nm sized cationic cyanoguanidine-formaldehyde resin was synthesized to coagulate anionic dye wastewater, and the results showed that the less pH of aqueous cyanoguanidine-formaldehyde resin solution was, the higher Zeta potential of that was. In case of coagulating 0.4 g/L reactive dye by cyanoguanidine-formaldehyde resin at pH 3, 5, 7, 9, and 11, COD removal and the percent decolorization of synthetic dye wastewater at pH 3 are higher than those of other pH conditions. The COD removal and the percent decolorization of synthetic dye wastewater were 74% and 90% at 400 ppm, pH 3.