• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.1-10
• /
• 2002

Tencel fabric cationized with chitosan can be effectively dyed with anionic dyes. To investigate the change of dyeing properties of cationized Tencel fabric, some experiments were performed under the several dyeing conditions with acid and reactive dyes. Whiteness index decreased with the increment of crosslinking agent concentration. The cationized Tencel fabric was dyed well by anionic dye such as acid dye, the dyeability of reactive dye was improved by addition of a little salt without alkali. The dye fixation on the cationized Tencel fabric was increased with chitosan concentration without electrolyte and alkali. The dyeability of Tencel treated with chitosan was better than controlled Tencel, especially under the acidic conditions. According to the number and the types of functional group of reactive dyes, dye affinity of the modified Tencel fabric varied and wash fastness of acid dye was better than reactive dye.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.18-28
• /
• 1998

in order to overcome disadvantage of the conventional two bath dyeing method of polyester/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish sayings in time, energy and water usage. Also, when dyeing polyester/cotton blends by the one bath dyeing method, the high salt concentrations needed for the reactive dye can cause particles of disperse dye, used for the polyester component, to aggregate. A supplementary problem that can occasionally be happened is the change of hue that occurs on dyed polyester in an alkaline dyebath. To improve dyeing property of polyester/cotton blends, cotton component was pretreated with epichlolohydrine-trimethylamine hydrochloride in aqueous solution of sodium hydroxide to produce a cationized cotton that can be dyed under neutral conditions with reactive dye in a non-electrolytic or il little electrolytic dyebath. The one bath dyeing method of polyester/cationized cotton blends with disperse dye/reactive dye mixture resulted in a satisfactory dyeing property and color yield in comparison with ordinary two bath dyeing method.

• 한국물환경학회지
• /
• 제23권1호
• /
• pp.27-32
• /
• 2007

This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

• 공업화학
• /
• 제17권4호
• /
• pp.426-431
• /
• 2006

Poly(methyl methacrylate) (PMMA)의 착색을 위하여 아크릴 그리고 비닐설폰기를 가지는 청색 및 오렌지 아조 염료들을 6-bromo-2-cyano-4-nitroaniline과 2,5-dimethoxy-4-(vinylsulfonyl)benzenamine을 3-acrylamido-(N,N-diethylamino) benzene과 3-methyl-(N,N-diethylamino)benzene의 아조 짝지음 반응을 이용하여 각각 합성하였다. 또한 알릴기를 가지는 염료는 비닐설폰과 allylamine과의 반응에 의하여 제조하였다. PMMA의 착색은 아크릴, 비닐설폰 그리고 알릴 작용기를 가지는 염료를 직접 methyl methacrylate (MMA)와 공중합하거나, MMA와 공중합한 고분자염료 및 반응성기가 없는 염료 2를 직접 MMA에 용해하여 중합과 동시에 착색하였다. 3가지로 착색한 PMMA의 염색 견뢰도를 여러 환경 조건에서 염료의 용해도를 비교하여 평가하였다.

• KSBB Journal
• /
• 제8권2호
• /
• pp.150-155
• /
• 1993

난분해성인 색소를 대사분해할 수 있는 미생물을 분리하여, 색소분해의 최적조건을 조사하였다. 미생물은 폐수처리공장의 폭기조에서 채취한 폐수로부터 agar media에서 순수분리하였다. 이 균주들을 glu­c cose, peptone, $Na_2HPO_45, KCI, MgSO_4, KH_2PO_4, NaCI, CaCI_2$와 dye(azo계, reactive red계 ) lOppm 을 함유한 액체 배지에서 dye의 분해력이 강하였으 며, 이때의 최적 pH는 중성 또는 약알칼리성이고, 최적 온도는 $30^{\circ}C$ 전후이다. 이 조건에서 10ppm의 m mono-azo(Lot No. 180), di-azo(Lot No. 138), re­a active red(Lot No.2)는 약 2일에 거의 분해되었고, di-azo(Lot No. 151), reactive red(Lot No. 34, L Lot No. 00166)는 약 5일에 거의 분해되었고, 최적 배지조건하에서 산소의 영향은 D.O를 50%로 유지 시켰을 경우보다 혐기성 배양의 경우가 reactive d dye(Lot No.2)의 분해도가 훨씬 높았다.

• Fibers and Polymers
• /
• 제6권3호
• /
• pp.224-228
• /
• 2005

This paper focuses on the application of a novel mathematical limit approach derived for K/S values in reactive dyeing of cotton fabrics. The relation obtained from Kubelka-Munk equation is used because the Kubelka-Munk equation is the basic relationship among fabric reflectance, fabric dye content and dyestuff characteristics. The limit approach derived in a former paper is applied to the laboratory dyeings and the dyeing behavior of some reactive dyes on cotton knitted fabric has been obtained. The results of the laboratory experiments are discussed using the new mathematical approach. When the actual K/S values obtained from the dyeings and the calculated K/S values derived by the limit approach are considered independently, it is observed that the limit relation is val id for low dye concentration applications. When the K/S values are calculated taking the K/S value of the initial dyeing concentration $(0.1\;\%\;owf)$ as the starting concentration by applying the result of the derived limit approach, the calculated K/S values fit with the ones obtained in actual dyeings. It is concluded that the novel approach presented in the paper can be used in calculating the K/S values when the initial dyeings at low dye concentrations are carefully carried out.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.11-20
• /
• 2011

UV-induced surface copolymerization has been widely applied as a simple, useful and versatile approach to improve the surface properties of textiles. C.I. Reactive Black 5 and acrylic acid (AA) were continuously grafted onto cotton by UV irradiation. The photografting may occur by the copolymerization of AA with the vinylsulfone reactive dye which photochemically converted from the bissulfatoethylsulfone reactive group. The graft yield and color yield were influenced by UV energy, the dye and photoinitiator concentrations, a mole ratio of AA to dye, and pH. The coloration of cotton fabrics having a K/S of 7.0 can be obtained under a UV irradiation energy of 15$J/cm^2$ by the photografting of an aqueous alkaline formulation of 6% dye concentration containing 3% photoinitiator concentration on the weight of monomers, and a 3:1 mole ratio addition of AA to the dye. Furthermore, the photochemically dyed cotton fabrics showed comparable washing (staining) and rubbing fastness to conventional reactive dyeing method except shade change in the wash fastness and light fastness.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.42-49
• /
• 1997

In order to study the dyeability of reactive dyes fixable at neutral pH, three reactive dyes(DYE-NC, DYE-PC, and DYE-LC) were prepared by the reaction of Cibacron Brilliant Red 3B-A with nicotinic acid, pyridine, and lutidine, respectively. FT-IR and UV/Vis spectrophometry were used to identify the dyes prepared. While the maximum absorption wavelength (&{\lambda}_{max}&) of Cibacron Brilliant Red 3B-A was 515nm, the &{\lambda}_{max}& of DYE-NC, DYE-PC, and DYE-LC were 522nm, 525nm, and 536nm, respectively. The &{\lambda}_{max}& was shifted to the longer wavelength by introducing the electron donating groups to the pyridine ring of Cibacron Brilliant Red 3B-A. All of the reactive dyes synthesized showed good exhaustion and fixation property to cotton fabric at higher temperature and neutral pH condition. It was regarded that the quaternary pyridinium ion functionated as the leaving group instead of the chloride ion. Among them, DYE-NC showed the best dyeability at the above condition. It was considered that the electron withdrawing carboxylic acid group in nicotinic acid enhanced the cationic property of nitrogn in pyridine ring, resulting the good reactivity with OH group in cellulose.

• 한국의류학회지
• /
• 제24권3호
• /
• pp.385-392
• /
• 2000

The adsorption ability of dyes on chitin, a natural polymer was investigated for decolorization of dye wastewater. Chitin was manufactured in lab by decalcification in dilute aqueous HCI solution and deproteination in dilute aqueous NaOH solution with shrimp shells. Absorbance of residue solution of dyebaths after dye adsorptions of chitin were measured in varieties of dye concentration and dipping periods. Four kinds of dyestuffs were used, C.I.Acid Blue 29. C.I.Direct Blue 6, C.I.Reactive Orange 12 and C.I.Basic Red 18. When chtin 1g was dipped in 0.05% of dyebath with stirring, maximum adsorption ratio of each kind of dyes was exhibited as 91.6% for C.I.Acid Blue 29, 95% for C.I.Direct Blue 6, 58.2% for C.I.Reactive Orange 13 and 75.8% for C.I.Basic Red 19. It shows that chitin has better adsorption abilities of ionic dyes of acid, direct and basic dye than non-ionic reactive dye. And chitin has better adsorption abilities of anionic acid direct dyes than cationic basic dye because of the presence of nitrogen atoms. All kinds of dyestuffs used showed speedy absorption effects by chitin, so chitin can absorb much amount of dyes in 5 mimutes reach to equilibrium of adsorption in 2 hours after dipping. Basic dye was absorbed the most speedily in 5 minutes, although maximum adsorption ratio is not high. That reason can be thought that chitin surface is essentially negatively charged due to polar funtional groups.