• Macromolecular Research
• /
• 제11권5호
• /
• pp.311-316
• /
• 2003

The kinetics of photoinitiated polymerization of dimethacrylate macromonomers have been studied to determine the diffusion-controlled reaction parameters using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). A predicted kinetic rate expression with a diffusion control factor was employed to estimate an effective rate constant and to define the reaction-controlled and diffusion-controlled regimes in the photopolymerization. An effective rate constant, k$_{e}$, can be obtained from the predicted kinetic rate expression. At the earlier stages of polymerization, the average values of kinetic rate constants do not vary during the reaction time. As the reaction conversion, $\alpha$, reaches the critical conversion, $\alpha$$_{c}$, in the predicted kinetic expression, the reaction becomes to be controlled by diffusion due to the restricted mobility of dimethacrylate macromonomers. A drop in value of effective rate constant causes a drastic decrease of reaction rate at the later stages of polymerization. By determining the effective rate constants, the reaction-controlled and diffusion-controlled regimes were properly defined even in the photopolymerization reaction system.m.m.

• Journal of Ginseng Research
• /
• 제7권1호
• /
• pp.88-93
• /
• 1983

Studies were carried out to elucidate the protein stabilizing effect of ginseng. Malate dehydrogenase (EC 1.1.1.37) was used as a protein and the rate constant of the enzyme inactivation was determined under the heat denaturation condition. There was an optimum pH for the enzyme stability, the rate constant of the enzyme inactivation was minimum at BH 8.8. The rate constant was increased at lower and higher pH regions than the optimum pH. The inactivation reaction followed the Arrehnius law and the activation energy was measured as 36.8kcal/mole. The reaction rate was not affected by the enzyme concentration and thus it was assumed to be unimolecular first order reaction. The water extract of red ginseng decreased the rate constant of Malate dehydrogenate under heat inactivation condition to stabilize the enzyme activity. Purified ginseng saponin also stabilized the enzyme against heat inactivation.

• 대한화학회지
• /
• 제52권3호
• /
• pp.217-222
• /
• 2008

본 논문에서는 반응 매질의 부피가 촉매 반응 속도에 미치는 영향을 조사하였다. 단순하지만 정확한 모델에 대한 연구로부터 촉매 반응의 반응 속도 계수는 매질의 부피가 줄어들 수록 증가함을 알게 되었다. 평균 반응속도 상수(average reaction rate constant)는 Collins-Kimball 속도 상수의 일반화 된 형태로 얻어졌는데, 속도 상수는 부피의 효과를 보정해주는 인자를 포함하고 있다. 조사한 모델의 반응물 농도는 전통적 화학 반응론에서 예측되는 지수함수적 감소와는 상당한 차이를 보이는데 이는 기존 화학 반응속도론에서는 무시되는 반응분자 공간 분포의 비평형 확산운동(non-equilibrium diffusive dynamics)의 효과 때문이다. 반응 매질의 부피 가 유한한 점을 고려하면, 반응 시간이 충분히 오래 지났을 때, 기존의 확산지배 반응에서는 예측 되는 않는 지수 함수적 농도 감소가 얻어지는데, 그 속도 상수 역시 반응매질 크기에 의존한다.

• 환경위생공학
• /
• 제17권1호
• /
• pp.69-74
• /
• 2002

This study explored for treatment processes by investigating the treatment efficiency and reaction mechanism through oxidation reaction using UV and $O_3$ as oxidant in compensate the wastewater containing nitrobenzene that is non biodegradable organic. Also by modeling these reactions, we try to step explanation of optimum reaction rate and reaction mechanism as the development of the computer program predictable the reaction rate by modeling the reaction. By using this model, after kinetic constant for each reaction from an experimental data is made an optimization and for hardly contribute to reaction rate in reaction kinetic equation is made an ignorance and suppose the simplified reaction mechanism, examined the propriety of computer simulation model and simplified reaction mechanism by comparing and inspecting the reaction kinetic constant and masstransfer coefficient. An investigation results for destructional treatment of nitrobenzene in the wastewater as non-biddegradable organic using UV, $O_3{\;}O_2{\;}H_2O_2-UV$ as oxidant.

• 한국응용과학기술학회지
• /
• 제3권2호
• /
• pp.41-47
• /
• 1986

The transesterification reaction between diethanolamine and methyl-methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The quantity of methylmethacrylate reacted in the reaction flask was measured by gas chromatography and liquid chromatography, and the reaction rate was investigated by measuring of the quantity of products and reactnts under various catalysts. The transesterification reaction was carried out in the first order reaction kinetics with respect to the concentration of diethanolamine and methylmethacrylate, respectively. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The linear relationship was shown between apparent rate constant and reciprocal absolute temperature, and by the Arrhenius plot, the activation energy has been calculated as 11.08 Kcal with zinc acetate catalyst, 17.99 Kcal without catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• Bulletin of the Korean Chemical Society
• /
• 제25권7호
• /
• pp.1081-1084
• /
• 2004

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권1호
• /
• pp.85-90
• /
• 1998

The reaction rate of $CO_2$ with 2-amino-2-methyl-1-propanol (AMP), MEA monoethanolamine(MEA) and diethanolamine (DEA) in aqueous solutions has been determined using a stirred vessel with a plane gas-liquid interface over a wide range of concentrations of amines at different temperatures. The results show that the overall reaction rate is first order with respect to both $CO_2$ and amine. The reaction rate constant varies with temperature according to the relationship which agrees with the experimental data. The proposed interpretation is that the kinetic rate determining step is a reaction of $CO_2$ with amine to form carbamic acid which is then totally and immediately ionized.

• 한국환경과학회지
• /
• 제2권1호
• /
• pp.85-90
• /
• 1993

The reaction rate of $CO_2$ with 2-amino-2-methyl-1-propanol (AMP), MEA monoethanolamine (MEA) and diethanolamine (DEA) in aqueous solutions has been determined using a stirred vessel with a plane gas-liquid interface over a wide range of concentrations of amines at different temperatures. The results show that the overall reaction rate is first order with respect to both $CO_2$ and amino. The reaction rate constant varies with temperature according to the relationship which agrees with the experimental data. The proposed interpretation is that the kinetic rate determining step is a reaction of $CO_2$ with amine to form carbamic acid which is then totally and immediately ionized.

• 자원리싸이클링
• /
• 제12권4호
• /
• pp.30-37
• /
• 2003

황산 용액에서 Zinc-ferrite의 용해에 대한 반응속도론을 황산 용액의 반응온도와 농도 변화에 대해 조사하였다. 반응율(R)과 겉보기 반응 속도상수(K)는 황산 용액의 온도와 농도가 클수록 증가한다. Zinc-ferrite의 반응속도는 반응초기에서 $1-(1-K)^{1/3}=Kt$와 같은 속도식을 적용할 수 있다. 용해에 대한 활성화 에너지는 황산 용액의 농도에 관계없이 약 16.3kcal/mole 이다. Zinc-ferrite가 황산 용액에서 용해할 때는 Zinc-ferrite의 화학 양론적 조성으로 용해되며, Fe 또는 Zn의 단독으로는 용해되지 않는다.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.274-280
• /
• 1998

가황반응에 대한 반응차수, 반응속도상수 및 활성화에너지, 가교결합에 의한 가교밀도 및 탄성상수를 동일한 가황시스템하에서 실리카와 카본블랙을 함유한 SBR/BR 블렌드에 대하여 조사하였다. 반응차수는 충전제 종류에 관계없이 1차 반응이었으며, 카본블랙이 첨가된 배합고무는 실리카가 첨가된 배합고무보다 반응속도가 빠르게 나타났다. 그러나 활성화에너지는 충전제 종류 및 고무 블렌드 조성에 관계없이 일정하게 나타났다. 가교밀도 및 탄성상수는 고무와 카본블랙간의 강한 상호작용으로 인해 카본블랙이 첨가된 조성물에서 높게 나타났다. 한편, 고무 블렌드중 부타디엔 고무 함량이 증가할수록 가교밀도 및 탄성상수는 감소하였다. 가황고무중 결합 황 함량 비교결과, 실리카가 첨가된 조성물중 일정한 결합 황 함량은 반응시작 후 20분 후에 나타났으나, 카본블랙이 첨가된 조성물은 10분 후에 나타났다. 또한 실리카가 첨가된 조성물은 카본블랙이 첨가된 조성물에 비해 반응 유도시간($t_2$) 및 최적 가황시간($t_{90}$)이 길게 나타났다.