• Journal of Pharmaceutical Investigation
• /
• v.5 no.2
• /
• pp.57-62
• /
• 1975

It was many differances to evaluate of the effect of excipients on colour fading in FD & C Yellow No.5 by use Tintometer and nearly is not effective in FD & C Red No. 2. When we observed colour fading in suger coating formulations by tintometer, FD & C Red No.2 was appeared to follow zero order reaction and FD & C Yellow No. 5 was not follow zero order reaction or first order reaction. Also, we could know the tendency of colour fading by visible spectrum, but it was net suitable method for this experiment more than by tintometer. The relative colour fading effect of the surfactants(Polysorbate) was as follows: Tween 60> Tween 80> Tween 20. In addition to, Benzalkonium chloride was reacted with FD & C Yellow No.5, so the stronger colour was appeared. On the other hand, the weaker colour was appeared in FD & C Red No.2. While, the sunscreening agents was not almost effective in colour fading of FD & Yellow No. 5 and FD & C Red No. 2.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.261-267
• /
• 2006

Understanding the mechanism of carbon oxidation is important for the successful modeling of diesel particulate filter regeneration. Carbon oxidation characteristics were investigated by temperature programmed oxidation(TPO) method as well as constant temperature oxidation(CTO) with a flow reactor including porous bed. The activation energy of carbon oxidation was increasing with temperature and had two different constant values in the early and the later stage of the oxidation process respectively in TPO experiment. Kinetic constants were derived and the reaction mechanisms were assumed from the experimental results and a simple reaction scheme was proposed, which approximately predicted the overall oxidation process in TPO as well as CTO.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.10-13
• /
• 2021

The method of removing micro-plastics from sea water has been developed using electro-magnetic force. Plastics are difficult to decompose and put a great load on the marine environment. Especially a plastic with a size of 5 mm or less is defined as micro-plastic and are carried by ocean currents over long distances, causing global pollution. These are not easily decomposed in the natural environment. The Lorentz force was generated in simulated sea water and its reaction force was applied to the micro-plastic to control their motion. Lorentz force was generated downward and the reaction force to the plastics was upward. The plastic used in the experiment was polystyrene with a diameter of 6 mm, and the density was 1.07 g/cm³. The polystyrene sphere levitated at the current density of 0.83 A/cm² and the external field of 0.87T. The particle trajectory calculation was also made to design separation system using superconducting magnet.

• Korean Journal of Animal Reproduction
• /
• v.10 no.2
• /
• pp.192-203
• /
• 1986

Two experiments in this study were designed to compare the potential for in vitro capacitation and in vitro fertilization of ejaculated sperm among individual rabbit bucks. In experiment 1, for in vitro capacitation, the ejaculated sperm were preincubated in DM for 12 hr or 18 hr after HIS treatment, then 12 hr -or 18 hr- preincubated sperm were incubated with superovulated rabbit ova in a 5% CO2 incubator for 36 hr at 38$^{\circ}C$, and a part of cleaved ova was transferred to the recipient does for implantation of embryo. In experiment 2, effect of lysolecithin addition to preincubation medium on induction of accelerated in vitro capacitation and in vitro fertilization of individual rabbit sperm was studied. Experiment 1; 1. Percent acrosome reaction of sperm, noted after staining, after 12 hr or 18 hr preincubation ranged from 52.5 to 76.0% and from 67.5 to 90.0%, respectively and sperm motility index of these sperm ranged from 20.0 to 47.5 for 12 hr-preincubated sperm and from 15.0 to 37.5 for 18 hr- preincubated sperm. There was no a certain relation between percent acrosome reaction and sperm motility index. 2. In vitro fertilization rate (cleavage rate) of in vitro capacitated sperm varied widely among individual bucks, ranging from 0 to 47.8% for 12 hr - preincubated sperm and from 0 to 60.9% for 18 hr -prein- cubated sperm. Cleavage rate of 18 hr - preincubated sperm was higher and faster than that of 12 hr - preincubated sperm. 3. Eight of 44 in vitro fertilized embryos transferred into 6 recipients were implanted in 4 recipients (66.7%) up to day 15 and implnatation rate was 18.2%. Experiment 2; 1. The percent acrosome reaction of sperm before and after 4 hr preincubation in DM without lysolecithin varied significantly among individual bucks, ranging from 0.4 to 18.4% and from 1.7 to 37.4%, respectively and percent acrosome reaction of sperm at 30 min after addition of 60${\mu}$g/ml lysolecithin also was significantly different among bucks, ranging from 19.2 to 67.1%. 2. Effect of accelerated acrosome reaction following lysolecithin addition was more considerable in the individuals showed less percent acrosome reaction before and after 4 hr preincubation. Percentage of motile sperm and motility score showed a trendency towards a decrease with increase of preincubation time and time after lysolecithin addition. 3. In vitro fertilization rate (cleavage rate) at 24 hr postinesmination with pooled sperm were treated to 60 $\mu\textrm{g}$/ml lysolecithin for 30 min after 4 hr preincubation was 24.6%, a higher rate than 13.2% for control. While 80 $\mu\textrm{g}$/ml lysolecithin-added sperm showed a lower cleavage than control and 60$\mu\textrm{g}$/ml-added sperm at both 24 hr and 48 hr postinsemination. These results from 2 experiments suggest that more useful preincubation time for the in vitro capacitation of ejaculated rabbit sperm is 18 hr in DM after HIS treatment, although there is wide variation in vitro capacitation and in vitro fertilization rate among individual bucks, and lysolecithin addition to at least 4 hr - preincubated sperm in DM can result in almost same in vitro fertilization rate as that of 18 hr - preincubated sperm in the experiment 1.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.857-863
• /
• 1998

A simple and new experimental method for determination of lysozyme-M. lysodeikticus cell lysis reaction and lysozyme activity was suggested using Beer's law. The UV transmittance of the solution changed with the concentration of M. lysodeikticus and the relationship between the UV transmittance and M. lysodeikticus cell concentration followed Beer's Law. In addition, it was experimentally proven that the UV transmittance of the solution was not influenced by the lysozyme concentration and product of the lysis reaction. During the lysozyme-M. lysodeikticus cell lysis reaction, thus, M. lysodeikticus cell concentration in the solution could be measured in-situ by UV-spectrophotometer. By using these experimental data, kinetic Parameters of the Michaelis-Menten equation for the lysozyme-M. lysodeikticus cell 1ysis reaction was simply determined The maximum reaction rate constant ($k_3$) and Michaelis-Menten constants were $0.1734sec^{-1}$ and $9.83{\times}10^{-6}M$ respectively. The activity of the lysozyme could also be obtained with this experiment because the lysis reaction rate of the 1ysozyme depended on its activity.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1004-1010
• /
• 1998

Effects of reaction conditions such as power input and feeding time and feeding mode of reactants on the reaction crystallization of lanthanum oxalate in semi-batch reactor were investigated experimentally. Even though the crystal size distribution of lanthanum oxalate was always monomodal, its mean crystal size was significantly varied with the reaction conditions. As the power input and reactant feeding rate increased, the mean crystal size was reduced and the relative induction time was prolonged. The mean crystal size produced in oxalic acid feeding mode was smaller than that in lanthanum chloride feeding mode, but the trend of the relative induction time with the feeding mode was reverse to that of the mean crystal size. The crystal morphology of lanthanum oxalate, which was produced within the ranges of the reaction conditions in our experiment, was maintained as a needle shape.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1989.05a
• /
• pp.58-59
• /
• 1989

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.76-82
• /
• 2006

Fenton's reaction are difficult to apply in the field due to the low pH requirements for the reaction and the loss of reactivity caused by the precipitation of iron (II) at neutral pH. Moreover, Fenton-like reactions using iron mineral instead of injection of iron ion as a catalyst are operated to get high removal result at low pH. Because hydroxyl radical can generate at the surface of iron mineral, there are competition with a lot of hydroxide at around neutral pH. On the other side, to operate Fenton's reaction series at neutral pH, modified Fenton reaction is suggested. The complexes, composed by iron ions (ferrous ion or ferric ion)-chelating agent, could be acted as a catalyst and presented in the solution at neutral pH. However, modified Fenton reaction requires a lot of hydrogen peroxide. Accordingly, the purpose of this experiment was to effectively combine Fenton-like reaction and modified Fenton reaction for extending application of Fenton's reaction. i.e., injecting chelating agents in Fenton-like reaction at around neutral pH is increasing the concentration of dissolved iron ion and highly promoting the oxidation effect. 2,4,6-trinitrotoluene (TNT) was used as a probe compound for comparing reaction efficiencies in this study. If the concentration of dissolved iron ion in combined Fenton process were existed more than 0.1 mM, the total TNT removal were increased. Magnetite-NTA system showed the best TNT removal (76%) and Magnetite-EDTA system indicated about 56% of TNT removal. The results of these experiments proved more promoted 40-60% of TNT removal than Fenton-like reaction's.

• Journal of The Korean Society of Integrative Medicine
• /
• v.3 no.4
• /
• pp.37-42
• /
• 2015

Purpose: This study was conducted to test the impact of The Dynamic Visual-Motor integration training has effect on the visual perception reaction velocity. Dynavision were used to measure data from the participating 24 students(K college). Method : The participants were the 24 students of 'K' College in Busan in there twenties. They were divided into the The Dynamic Visual-Motor integration training group and the control group. To know if the Dynamic Visual-Motor integration training has effect on the visual perception reaction velocity, the Dynamic Visual-Motor integration training was implemented triweekly for 4 weeks. In Dynamic Visual-Motor integration training the ball should be grasped with one hand and threw by an arm. Only the balls threw beyond the objective point were counted. The visual perception reaction velocity and the number of response were measured before and after experiment by Dynavision. Result : Firstly, the visual perception reaction velocity was increased in Dynamic Visual-Motor integration training group compared with control group. Secondly, the number of response was also increased in Dynamic Visual-Motor integration training group compared with control group. Conclusion : As a result of The Dynamic Visual-Motor integration training has an effect on the visual perception reaction velocity and the number of response. The Dynamic Visual-Motor integration training seems to be effective for cerebral apoplexy patient who has visual perceptional disability or cerebral palsy child in training for visual perceptional development or daily living activities development. Study participated by more detailed and practical patients in hospital is needed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.276-282
• /
• 2008

The effects of hydrogen enrichment to methane have been investigated with swirl-stabilized premixed hydrogen-enriched methane flame in a laboratory-scale pre-mixed combustor. The hydrogen-enriched methane fuel and air were mixed in a pre-mixer and introduced to the combustor through different degrees of swirl vanes. The flame characteristics were examined for different amount of hydrogen addition to the methane fuel and different swirl strengths. The hydrogen addition effects and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using micro-thermocouple, particle image velocity meter (PIV) and chemiluminescence techniques to provide information about flow field. The results show that the flame area increases at upstream of reaction zone because of increase in ignition energy from recirculation flow for increase in swirl intensity. The flame area is also increased at the downstream zone by recirculation flow because of increase in swirl intensity which results in higher centrifugal force. The higher combustibility of hydrogen makes reaction faster, raises the temperature of reaction zone and expands the reaction zone, consequently recirculation flow to reaction zone is reduced. The temperature of reaction zone increases with hydrogen addition even though the adiabatic flame temperature of the mixture gas decreases with increase in the amount of hydrogen addition in this experiment condition because the higher combustibility of hydrogen reduces the cooler recirculation flow to the reaction zone.