• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.485-488
• /
• 2013

A SiC-$CeO_2$ composite membrane was successfully fabricated using an ally-hydridopolycarbosilane (AHPCS) binder and treated by dip-coating at 60 times with a $CeO_2$ sol solution. The dip-coated SiC membrane was calcined at 773 K and then sintered at 1173 K under an air atmosphere. The coated membrane was characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and a BET surface analysis. The difference in permeation performance between $H_2$ and CO gases was measured by varying the temperature. The permeation flux of $H_2$ on the SiC membrane with layered $CeO_2$ was obtained as $8.45{\times}10^{-6}\;mol/m^2sPa$ at room temperature. The CO permeation flux was $2.64{\times}10^{-6}\;mol/m^2sPa$ at room temperature. The reaction enthalpy (${\Delta}H^{\circ}$) for the hydrogen permeation process was calculated as -7.82 J/mol by Arrhenius plots.

• Bulletin of the Korean Chemical Society
• /
• 제11권4호
• /
• pp.309-313
• /
• 1990

The rates of solvolysis of trans-$[Co(N-eten)_2Cl_2)$+ (N-eten; N-ethylethylenediamine) have been investigated using spectrophotometric method in binary aqueous mixtures containing methyl alcohol, isopropyl alcohol, t-butyl alcohol, ethylene glycol and glycerol. The values of ${\Delta}H^{\neq}$ and ${\Delta}S^{\neq}$ obtained from temperature effect on the rate constants were $80{\sim}84 kJmol^{-1}$ and $- 28{\sim} - 45 JK^{-1}mol^{-1}.$ Extrema found in the variation of the enthalpy and entropy of activation with solvent composition correlated very well with extrema in the variation of the physical properties of mixture which relate to sharp change in the solvent structure. The reaction mechanism was discussed in terms of correlation diagrams involving the exess molar Gibbs function of mixing for the binary mixtures. The behavior of this cobalt(Ⅲ) complex was compared with that of t-butyl chloride. The application of free energy cycle to the process initial state to transition state in water and in the mixture showed that the solvation of transition state had dominant effect on the rates in the mixtures. It was found that $S_N1$ character was increased with increasing the content of co-solvent in the mixture.

• 대한화학회지
• /
• 제25권4호
• /
• pp.283-290
• /
• 1981

N,N-디메틸포름아미드용매내 반응온도 50∼$90^{\circ}C$범위에서 과량의 슈크로오스와 라우르산, 미리스트산, 팔미트산, 스테아르산 그리고 올레산등 5종의 지방산 메틸에스테르와의 에스테르 교환반응에서 반응속도를 측정하여 반응속도정수, 활성화파라미터등을 구하여 고찰하였다. 이 반응은 본 실험범위내에서 유사 1차반응으로 진행하고 반응의 순서는 주로 메틸에스테르의 지방산기의 구조변화에 의존하면 라우르산메틸, 미리스트산메틸, 팔미트산메틸 올레산메틸 그리고 스테아르산 메틸의 순으로 반응되기 힘들어지는 엔탈피조절반응이라 생각된다. 한편 이들 각각의 활성화에너지는 9.3, 9.9, 10.3, 10.9 그리고 11.1 kcal/mole이 얻어졌다.

• KSBB Journal
• /
• 제10권2호
• /
• pp.149-158
• /
• 1995

각종 CD와 여러 종류의 화합물, pH indicator, biostain, 아미노산, 천연배당체, 그리고 fatty acid 간의 inclusion complex 형성능을 비교하였다. Fatty acid가 각종 CD에 대한 포접형성능과 선택성 이 높아 CD 분리용 ligand로 적합함을 알았다. Fatty acid의 포접능과 선택성은 탄소쇄의 길이와 밀접한 상관관계를 나타내어 capric acid는 ${\alpha}$- CD와 palmitic acid는 ${\beta}$-CD와 높은 선택성을 보였다. Complex형성에 미치는 반융조건인 흔합 농도비, pH, ionic strength, 그리고 온도의 영향을 검토하였다. 적정 혼합 농도비는 CD가 50mM 그리고 lig and 인 fatty acid가 50mM 일 때 였으며 , 온도가 중 요한 형성조건으로 작용하였다. 포접되지 않은 CD 와 fatty acid가 포접 된 CD의 분자구조를 X-ray diffraction과 IR spectrum을 사용하여 비교 검토하였으며, DSC로 inclusion complex 형성반응의 en­t thalpy의 변화값(${\gamma}H$)을 측정하여 발열반응임을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2267-2273
• /
• 2011

A novel energetic material, 1-amino-1-(2,4-dinitrophenylhydrazinyl)-2,2-dinitroethylene (APHDNE), was synthesized by the reaction of 1,1-diamino-2,2-dinitroethylene (FOX-7) and 2,4-dinitrophenylhydrazine in N-methyl pyrrolidone (NMP) at 110 $^{\circ}C$. The theoretical investigation on APHDNE was curried out by B3LYP/6-311+$G^*$ method. The IR frequencies analysis and NMR chemical shifts were performed and compared with the experimental results. The thermal behavior of APHDNE was studied by DSC and TG/DTG methods, and can be divided into two crystal phase transition processes and three exothermic decomposition processes. The enthalpy, apparent activation energy and pre-exponential factor of the first exothermic decomposition reaction were obtained as -525.3 kJ $mol^{-1}$, 276.85 kJ $mol^{-1}$ and $10^{26.22}s^{-1}$, respectively. The critical temperature of thermal explosion of APHDNE is 237.7 $^{\circ}C$. The specific heat capacity of APHDNE was determined with micro-DSC method and theoretical calculation method, and the molar heat capacity is 363.67 J $mol^{-1}K^{-1}$ at 298.15 K. The adiabatic time-to-explosion of APHDNE was also calculated to be a certain value between 253.2-309.4 s. APHDNE has higher thermal stability than FOX-7.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2523-2528
• /
• 2014

In the present study, at first, azo Schiff base ligand of (N,N'-bis(5-phenylazosalicylaldehyde)-ethylenediamine) ($H_2L$) has been synthesized by condensation reaction of 5-phenylazosalicylaldehyde and ethylenediamine in 2:1 molar ratio, respectively. Then, its cobalt complex (CoL) was synthesized by reaction of $Co(OAc)_2{\cdot}4H_2O$ with ligand ($H_2L$) in 1:1 molar ratio in ethanol solvent. This ligand and its cobalt complex containing azo functional groups were characterized using elemental analysis, $^1H$-NMR, UV-vis and IR spectroscopies. Subsequently, the interaction between native calf thymus deoxyribonucleic acid (ct-DNA) and CoL complex was investigated in 10 mM Tris/HCl buffer solution, pH = 7 using UV-vis absorption, thermal denaturation technique and viscosity measurements. From spectrophotometric titration experiments, the binding constant of CoL complex with ct-DNA was found to be $(2.4{\pm}0.2){\times}10^4M^{-1}$. The thermodynamic parameters were calculated by van't Hoff equation.The enthalpy and entropy changes were $5753.94{\pm}172.66kcal/mol$ and $43.93{\pm}1.18cal/mol{\cdot}K$ at $25^{\circ}C$, respectively. Thermal denaturation experiments represent the increasing of melting temperature of ct-DNA (about $0.93^{\circ}C$) due to binding of CoL complex. The results indicate that the process is entropy-driven and suggest that hydrophobic interactions are the main driving force for the complex formation.

• 공업화학
• /
• 제27권6호
• /
• pp.590-598
• /
• 2016

본 연구는 흡착제로 야자각계 수증기 활성화 입상 활성탄을 사용하여 Acid Black 1 수용액에서의 흡착 거동과 동역학적, 열역학적 파라미터에 대해 회분식 반응을 통해 조사하였다. 흡착변수로는 pH, 초기농도, 접촉시간, 온도를 사용하였다. pH에 대한 영향을 조사하기 위해 pHpzc 값을 분석한 뒤 pH 3-11 범위에서 제거율을 조사하였다. 흡착평형자료로부터 Langmuir, Freundlich, Temkin, Dubinin-Radushkevich 등온 흡착식에 대한 적합성을 평가하였다. 흡착공정에 대한 동역학적 해석을 통해 유사 1차반응식과 유사 2차반응식에 대한 흡착반응의 일치도를 평가하였다. 열역학적 해석을 통해 엔탈피 변화 값과 활성화에너지 값을 조사하여 이를 통해 흡착공정이 흡열반응인지를 확인하였으며, 엔트로피 변화 값과 자유에너지 값을 통해 흡착공정의 자발성을 확인하였다.

• Journal of Nuclear Fuel Cycle and Waste Technology
• /
• 제1권1호
• /
• pp.65-73
• /
• 2013

Temperature-dependent hydrolysis behaviors of aqueous U(VI) species were investigated with time-resolved laser fluorescence spectroscopy (TRLFS) in the temperature range from 15 to $75^{\circ}C$. The formation of four different U(VI) hydrolysis species was measured at pHs from 1 to 7. The predominant presence of $UO{_2}^{2+}$, $(UO_2)_2(OH){_2}^{2+}$, $(UO_2)_3(OH){_5}^+$, and $(UO_2)_3(OH){_7}^-$ species were identified based on the spectroscopic properties such as fluorescence wavelengths and fluorescence lifetimes. With an increasing temperature, a remarkable decrement in the fluorescence lifetime for all U(VI) hydrolysis species was observed, representing the dynamic quenching behavior. Furthermore, the increase in the fluorescence intensity of the further hydrolyzed U(VI) species was clearly observed at an elevated temperature, showing stronger hydrolysis reactions with increasing temperatures. The formation constants of the U(VI) hydrolysis species were calculated to be $log\;K{^0}_{2,2}=-4.0{\pm}0.6$ for $(UO_2)_2(OH){_2}^{2+}$, $log\;K{^0}_{3,5}=-15.0{\pm}0.3$ for $(UO_2)_3(OH){_5}^+$, and $log\;K{^0}_{3,7}=-27.7{\pm}0.7$ for $(UO_2)_3(OH){_7}^-$ at $25^{\circ}C$ and I = 0 M. The specific ion interaction theory (SIT) was applied for the extrapolation of the formation constants to infinitely diluted solution. The results of temperature-dependent hydrolysis behavior in terms of the U(VI) fluorescence were compared and validated with those obtained using computational methods (DQUANT and constant enthalpy equation). Both results matched well with each other. The reaction enthalpies and entropies that are vital for the computational methods were determined by a combination of the van't Hoff equation and the Gibbs free energy equation. The temperature-dependent hydrolysis reaction of the U(VI) species indicates the transition of a major U(VI) species by means of geothermal gradient and decay heat from the radioactive isotopes, representing the necessity of deeper consideration in the safety assessment of geologic repository.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.297-302
• /
• 2007

With aids of square wave voltammetry (SWV) the redox behavior for various combination of polyvalent ions (Sb+Fe, Sb+Zn, Sb+Ce+Ti+Zn) was investigated in alkali-alkaline earth-silica CRT (Cathode Ray Tube) glass melts. The current-potential curve so called voltammogram was produced at temperature range of 1400 to $1000^{\circ}C$ under the scanned potential between 0 and -800 mV at 100 Hz. In the case of the Sb+Fe and Sb+Zn doped melts, peak for $Sb^{3+}/Sb^0$ shown voltammogram was shifted to negative direction comparing to the only Sb doped melts. However, according to voltammogram of Sb+Ce+Ti+Zn doped melt, Ti and Ce except Zn had hardly any influence on the redox reaction of Sb. Based on the temperature dependence of the peak potential, standard enthalpy (${\Delta}H^0$) and standard entropy (${\Delta}S^0$) for the reduction of $Fe^{3+}$ to $Fe^{2+}$, $Sb^{3+}$ to $Sb^0$, $Zn^{2+}$ to $Zn^0$ and $Ti^{2+}$ to $Ti^0$ in each polyvalent ion combination of CRT glass melts were calculated.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.758-762
• /
• 2007

A new alkyldithiocarbonate (xanthate), as sodium salts, C2H5OCS2Na, was synthesized by the reaction between CS2 with ethyl alcohol in the presence of NaOH. The new xanthate was characterized by 1H NMR, IR and elemental analysis. Then, the new synthesized compound was examined for functional study of cresolase activity of Mushroom Tyrosinase (MT) from a commercial source of Agricus bisporus in 10 mM phosphate buffer pH 6.8, at three temperatures of 10, 20 and 33℃ using UV spectrophotemetry. 4-[(4-methylphenyl)- azo]-phenol (MePAPh) was used as a synthetic substrate for the enzyme for cresolase reaction. The results show that ethyl xanthate can activate or inhibit the cresolase activity of mushroom tyrosinase depending to the concentration of ethyl xanthate. It was concluded that the enzyme has two distinct sites for ethyl xanthate. The first one is a high-affinity activation site and the other is a low-affinity inhibition site. Activation of the enzyme in the low concentration of ethyl xanthate arises from increasing the affinity of binding for the substrate as well as increasing the enzyme catalytic constant. The affinity of ligand binding in the activation site is decreased by increasing of the temperature, which is the opposite result for the inhibition site. Hence, the nature of the interaction of ethyl xanthate is different in two distinct sites. The binding process for cresolase inhibition is only entropy driven, meanwhile the binding process for cresolase activation is not only entropy driven but also enthalpy driven means that hydrophobic interaction is more important in the inhibition site.