• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.149-158
• /
• 2005

This paper describes design, fabrication, and application of the silicon based temperature controllable micro reactor. In order to achieve fast temperature variation and low energy consumption, reaction chamber of the micro reactor was thermally isolated by etching the highly conductive silicon around the reaction chamber. Compared with the model not having thermally isolated structure, the thermally isolated micro reactor showed enhanced thermal performances such as fast temperature variation and low energy consumption. The performance enhancements of the micro reactor due to etched holes were verified by thermal experiment and numerical analysis. Regarding to 42 percents reduction of the thermal mass achieved by the etched holes, approximately 4 times faster thermal variation and 5 times smaller energy consumption were acquired. The total size of the fabricated micro reactor was $37{\times}30{\times}1mm^{3}$. Microchannel and reaction chamber were formed on the silicon substrate. The openings of channel and chamber were covered by the glass substrate. The Pt electrodes for heater and sensor are fabricated on the backside of silicon substrate below the reaction chamber. The dimension of channel cross section was $200{\times}100{\mu}m^{2}$. The volume of reaction chamber was $4{\mu}l$. The temperature of the micro reactor was controlled and measured simultaneously with NI DAQ PCI-MIO-16E-l board and LabVIEW program. Finally, the fabricated micro reactor and the temperature control system were applied to the thermal denaturation and the trypsin digestion of protein. BSA(bovine serum albumin) was chosen for the test sample. It was successfully shown that BSA was successfully denatured at $75^{\circ}C$ for 1 min and digested by trypsin at $37^{\circ}C$ for 10 min.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.49-55
• /
• 2008

The disadvantage of PMM's (polymer-modified mortars) that are currently on the market is the utilization of expensive polymer additives and also the cost of the other components. One of the possibilities how to decrease this price is the effective utilization of waste materials which are very inexpensive in spite of their good properties. The combinations of different degree in polymer adhesiveness and waste secondary raw materials - fly ash - are experimentally verified in the paper. The use of fly ash in adhesive materials for ceramic tiles is limited by unsatisfactory initial adhesiveness to sintered ceramic sherd as a result of a running pozzolanic reaction that lowers the efficiency of polymer additives. On the other hand, the use of adhesive and backfill coating materials for gluing ETICS board insulation materials has brought very good results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1748-1751
• /
• 1991

Generally, we can't acquire clear boundary or area from an image having obscure boundary like allergy image by using Sobel or Lapalace operator. Also, when the image not uniform in some part of a image in brightness, there are difficulties to use the global operator such as histogram, for the contour line doesn't have the same grey level. In this paper, we will propose an algorithm to improve those difficulties. The main idea of the algorithm is that we divide the image into many rectangular parts like a chess board, calculate the average of each part, and decide the local threshold for each pixel on the calculated value. In experiment, we can get the contour and area by this algorithm which is much like to the contour and area measured by a doctor. Also, This algorithm has many advantages such as short processing time and little influences of noises and can be used in the robot vision, etc..

• 대한의용생체공학회:의공학회지
• /
• 제28권3호
• /
• pp.392-396
• /
• 2007

In this paper, we develop a new system to visualize the blood flow map in skin tissue, using the technique of Laser Speckle Flowgraphy (LSFG). The measuring unit consists of the laser diode, imaging system, line sensor, scanning mirror, and one-board microcomputer. The speckle signal is analyzed and sent to a PC, where the blood flow in a tissue area of $14mm{\times}26 mm$ is evaluated and displayed in a 2-D color map. It is demonstrated that the new LSFG instrument is useful to evaluate the degree of allergic reaction in patch test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.375-376
• /
• 2010

본 연구는 WCP 대체율 및 오토클레이브 양생시간 변화에 따른 경량기포콘크리트의 미세구조 및 광물분석을 통한 화학적 특성을 검토하였다. 경화체의 미세구조 분석으로부터 수열 반응 후 WCP 대체율 및 양생시간에 관계없이 반응하여 판상형, 섬유형의 결정 구조물의 수화물을 형성한 것을 확인하였다. 또한 Tobermorite(C5S6H5)는 WCP의 구성성분인 결정질 Quartz의 반응에 의한 것으로 추정된다.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.879-884
• /
• 2012

Photoacoustic Tomography (PAT) is a promising medical imaging modality by reason of its particularity. It combines optical imaging contrast of optical imaging with the spatial resolution of ultrasound imaging and can demonstrate change of biological feature in an image. For that reason, many studies are in progress to apply this technic for diagnosis. But, real-time PAT system is necessary to confirm a biological reaction induced by external stimulation immediately. Thus, we developed a real-time PAT system using linear array transducer and self-developed Data acquisition board (DAQ) resources, To evaluate the feasibility and performance of our proposed system, two type of phantom test were also performed. As a result of those experiments, the proposed system shows enough performance and confirm its usefulness.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.178-182
• /
• 2003

The thermal decomposition of phthalate alone and with poly(vinyl chloride) (PVC) was carried out under a nitrogen atmosphere in a 4-necked separable flask. The thermal decomposition of phthalate in the presence of PVC began at 150$^{\circ}$, about 10$0^{\circ}C$ lower than the decomposition of phthalate alone. The formation of octyl chloride indicated an interaction reaction between phthalate and PVC. From the analysis of the composition of commercially plasticized PVC sheet (film and board), the phthalates (dibutyl phthalate, dihexyl phthalate) and di(2-ethylhexyl) phthalate), 2-ethyl-1-hexanol, phthalic anhydride, and 2-ethylhexyl hydrogen phthalate were identified. The mutage-nicities of these decomposition products were higher than those of phthalic diesters (phthalates).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 추계 학술논문 발표대회
• /
• pp.64-65
• /
• 2016

This study that prevent cancer using absorbent to inflow Radon gas in the room existing soil and rock is making board to absorb the Radon gas as a fundamental study. So, we use bentonite as a absorbent. So, we use bentonite as a absorbent. Bentonite is a 'clay mineral' composed to montmorillonite of main component that volcanic ash denatured to a clay mineral. Bentonite has fine microparticle of nano level, abundant mineral 66 of kinds, adsorbability, swelling, a positive ion(heavy metal adsorption reaction) as a bentonite's property. Using magnesia cement for oxide of magnesiuma and magnesium chloride as a main binder, we measure Radon gas absorbent efficiency and thermal conductivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.283-286
• /
• 2000

In this paper, generation form of displacement current was compared and measured induce monolayers which 8A5H with Pure azobenzene. Light response of two monolayers which compared and measured though they are the same isomer. The experimental results are as following; In case of ultraviolet($\lambda_1$) and visible($\lambda_2$) irradiation on 8A5H induce monolayers depositioned on board the peak of current was detected about 10[fA]. but light irradiation on pure azobenzene any particular reaction for detailed. This is the reason of hydrophobicity construct in molecule structures its molecule dynamic behaviour in cis and trans was not due to activated.

• Nuclear Engineering and Technology
• /
• 제25권2호
• /
• pp.265-275
• /
• 1993

증기폭발이 발생하면 파괴적인 동력에너지가 방출될 가능성이 있으므로. 이 현상은 원자력 발전소 안전성 연구 분야에서 중요한 현상으로 지목되어 왔다. 따라서 증기폭발이 미치는 영향을 분석하기 위해서는 폭발시 수반되는 열에너지가 동력에너지로 전환되는 비율을 정확히 해석할 수 있어야 한다. 그러나, 정확한 해석 방법의 개발이 이루어지지 않은 현 상황에서는 순수히 이론에 근거한 열역학적 해석 방법 등을 이용할 수 있으며 이러만 접근 방식은 그 결과가 보수적이라는데 그 의미가 있다. 본 논문에서는 현재까지 알려진 열역학적 해석 방법들을 정리하였고. 이론적으로 모순된 부분을 수정하여 비교하였다. 지금까지 알려진 바와는 달리. Hicks-Menzies 모델과 Board-Hall 모델은 에너지 전환율에서 동일한 결과를 나타냄을 보였다. 또한 증기폭발에서 냉각수 포기 기공율의 영향을 계산, 검토하였으며, 금속의 발열반응의 영향을 분석할 수 있는 열역학적 모델을 제시하였다.