• Journal of the Korean Wood Science and Technology
• /
• 제21권3호
• /
• pp.74-81
• /
• 1993

This experiment was carried out to investigate the reaction of hydration of paper sludge during the setting of portland cement in a paper sludge, wood-cement-water mixturte. The percentage of paper sludge per cement is 7.5%, 15%, 30% respectively. The result indicated that the sludge of 7.5% had the most effect on reaction of hydration, and the sludge of 15% had moderately inhibitory effect but there is still possibility to make sludge-cement board. Paper sludge of 30%, Pinus koraiensis Sieb. et Zucc and Populus euramericana Guinier were proved to have the worst inhibitory effect on cement hydration, so pretreatment will be needed before making board with paper sludge-cement mixture.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.746-754
• /
• 2019

Vitrification of radioactive liquid waste (RLW) provides a feasible solution for isolating radionuclides from the biosphere for an extended period. In vitrification, base glass and radioactive waste are added simultaneously into the melter. Determination of heat and mass transfer rates is necessary for rational design and sizing of melter. For obtaining an assured product quality, knowledge of reaction kinetics associated with the thermal decomposition of waste constituents is essential. In this study Thermogravimetry (TG) - Differential Thermogravimetry (DTG) of eight kinds of nitrates and two oxides, which are major components of RLW, is investigated in the temperature range of 298-1273 K in the presence of base glasses of five component (5C) and seven component (7C). Studies on thermal behavior of constituents in RLW were carried out at heating rates ranging from 10 to $40\;K\;min^{-1}$ using TG - DTG. Thermal behavior and related kinetic parameters of waste constituents, in the presence of 5C and 7C base glass compositions were also investigated. The activation energy, pre-exponential factor and order of the reaction for the thermal decomposition of 24% waste oxide loaded glasses were estimated using Kissinger method.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1996년도 춘계학술대회논문집
• /
• pp.291-300
• /
• 1996

This study is to determine the biomechanical characteristics of Korean. Male 58 and Female 54 were participated for the measurement which was performed by immersion method and reaction board method. Body parts were head with neck, trunk, upper arm, forearm, hand, thigh, leg, and foot. Their volumes were measures by immersion method. Their weight were determined by using Dempster(1995), Drills and Contini(1969) density data. Each center of body part weight were determined by specific posture on the reaction board. The postures were asked to the subject forearm- lifted posture, total let- lifted posture, foot-lifted posture. According to each posture, the center of each part were calculated.

• 한국항공우주학회지
• /
• 제48권7호
• /
• pp.529-536
• /
• 2020

한국형발사체 3단은 추력기 자세제어시스템에 의해 3단 엔진 점화 시점부터 위성 분리, 위성과 충돌을 막기 위한 회피기동까지 롤 및 3축 자세제어가 수행된다. 추력기 자세제어시스템은 추력기를 작동시킬 때 추진제를 소모하므로, 적정 추진제 충전은 임무 성공에 있어 중요하다. 그러므로 한국형발사체의 비행 중 추력기 자세제어시스템의 추진제 소모량이 얼마인지 추정할 수 있는 수단이 필요하다. 본 연구에서는 추력기 자세제어시스템에서 획득할 수 있는 압력, 온도 데이터를 바탕으로 추진제 소모량을 추정할 수 있는 에너지 관계식을 개발하였다. 개발된 관계식을 검증하기 위해 On-board 시스템과 유사한 시스템을 구성하여 시험을 했고, 추진제 소모량 추정식과 증류수를 사용한 시험 결과를 비교분석하였다. 또한 오차 분석을 통해 예측 결과의 신뢰성을 판단하였다. 마지막으로 시스템 수준 운용시험의 추진제 소모 결과도 나타내었다.

• 대한물리의학회지
• /
• 제11권4호
• /
• pp.85-92
• /
• 2016

PURPOSE: A good, valid, and feasible tool for evaluating sit to stand (STS) is needed to help clinicians quantify the STS ability of stroke patients and people with balance disorders. The purpose of this study was to evaluate the concurrent validity of the Nintendo Wii Balance Board (WBB) and a force plate during STS and gait. METHODS: Seventeen healthy adults performed five trials of STS and gait on the WBB placed on the force plate. The force plate and the WBB were compared in regard to center of pressure (COP) and ground reaction force (GRF) data that were collected simultaneously. The variables used for analysis were time (s), integral summation (%), COP path length (mm), COP x range, and COP y range, all of which were measured for both tasks. Counter (%), peak (%), and rebound (%) were analyzed for STS, and $1^{st}$ peak (%), min peak (%), and 2nd peak (%) were analyzed for gait. The concurrent validity was analyzed using an intraclass correlation coefficient (ICC) and a standard error of measurement (SEM) with a 95% confidence interval. RESULTS: The concurrent validity of the WBB for STS ranged from fair to good (ICC=.701~.994, SEM=.029~3.815). The concurrent validity for gait was good (ICC=.869 ~.989, SEM=.007~2.052) aside from path length and x and y ranges of COP (ICC=-.150~.371, SEM=3.635~4.142). CONCLUSION: The GRF of the WBB has a good validity for STS and gait analysis. The WBB is remarkably portable, easy to use, and convenient for clinically assessing STS and gait.

• 한국항공우주학회지
• /
• 제40권9호
• /
• pp.827-832
• /
• 2012

본 논문에서는 저궤도 위성의 반작용 휠 속도 측정을 위해 M-방식과 T-방식 모두 검출가능한 보드를 설계하여 두 방식의 장점을 이용할 수 있도록 하고, 실제 위성탑재컴퓨터에 장착하여 시험을 수행하고 이를 통하여 그 설계의 유용성을 검증한다. 위성에서 반작용 휠은 위성의 자세를 변화시킬 수 있는 대표적인 구동기의 하나로 반작용 휠 구동모터의 회전에 의해 발생하는 회전관성에 의해 자세 제어를 수행하게 된다. 반작용 휠의 회전속도를 검출하는 방법으로는 일정한 주기 T 동안 발생된 반작용 휠 내부 타코 펄스를 세어 휠의 속도를 검출하는 M-방식과 휠에서 발생되는 타코 펄스들 간의 시간을 측정해서 속도를 검출하는 T-방식으로 나눌 수 있다. M-방식은 구현이 간단하고 측정 시간이 일정하다는 장점이 있으나, 저속에서는 속도 측정 분해능이 떨어진다는 단점이 있다. 그에 반해, 타코 펄스간의 시간을 측정하는 T-방식은 저속에서 정밀한 속도를 측정할 수 있으며 측정에 따른 시간 지연이 작다는 장점이 있다. 그러나 이 방법 역시 실제 구현에 있어서 연산이 복잡하고 속도에 따라 연산 속도가 달라진다는 단점이 있다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.96-97
• /
• 2003

• 펄프종이기술
• /
• 제38권2호
• /
• pp.43-51
• /
• 2006

Starch is widely used as an adhesive material in the paper and corrugated board industry. The adhesion problem of corrugated board is categorized by two main parts called zipper board and white glue line. The object of this research is to investigate the factors affecting the adhesion problem by the gelatinization of various starch solutions and dynamic penetration properties measurements of various commercial base paper and handsheets. Flow property of starch solution is affected by sodium hydroxide addition and reaction level. Absorption property of commercial base papers and handsheets is affected by sizing and stock composition. Optimum bonding between top/bottom liners and corrugated medium is accomplished by acceptable flow viscosity of mixed starch solution and proper adsorption characteristic of base paper.

• 한국전문물리치료학회지
• /
• 제23권3호
• /
• pp.40-47
• /
• 2016

Background: Assessments of Sit-to-Stand (STS) and gait functions are essential procedures in evaluating level of independence for the patients after stroke. In a previous study, we developed the software to analyze center of pressure (COP) in standing position on Wii Balance Board (WBB). Objects: This purpose of this study is to measure test-retest reliability of ground reaction forces, COP and time using WBB on STS and gait in healthy adults. Methods: Fifteen healthy participants performed three trials of STS and gait on WBB. The time (s), vertical peak (%) and COP path-length (cm) were measured on both tasks. Additionally, counter (%), different peak (%), symmetry ratio, COP x-range and COP y-range were analyzed on STS, 1st peak (%), 2nd peak (%) of weight were analyzed on gait. Intra-class correlation coefficient (ICC), standard error measurement (SEM) and smallest real difference (SRD) were analyzed for test-retest reliability. Results: ICC of all variables except COP path-length appeared to .676~.946 on STS, and to .723~.901 on gait. SEM and SRD of all variables excepting COP path-length appeared .227~8.886, .033~24.575 on STS. SEM and SRD excepting COP path-length appeared about .019~3.933, .054~11.879 on gait. Conclusion: WBB is not only cheaper than force plate, but also easier to use clinically. WBB is considered as an adequate equipment for measuring changes of weight bearing during balance, STS and gait test which are normally used for functional assessment in patients with neurological problems and elderly. The further study is needed concurrent validity on neurological patients, elderly patients using force plate and WBB.

• 사상체질의학회지
• /
• 제10권1호
• /
• pp.143-160
• /
• 1998

연구목적 한국인 성인남녀를 대상으로한 신체분절에 관한 사상의학적 연구이다. 생체를 8-10분절로 분획하고 인체계측 및 침수법(Immersion Method) 및 평형측정판법(Reaction Board Method)을 이용하여 각 신체분절의 생체역학적 특성을 사상체질별로 객관화한다. 연구대상 연구대상자는 한국인 성인으로 남자 49명 여자 23명으로 총72명이며, 평균연령은 $29.4{\pm}8.54$세이고 태음인 30명, 소양인 17명, 소음인 25명이었다. 연구방법 인체계측항목중 신체분절길이 및 둘레와 골폭 및 스킨폴드 두께는 Lohman 등(1988)의 인체계측 부위 및 방법에 따라 42개 항목과 사초부위의 9항목으로 총 51개 항목을 측정하였다. 사지의 측정은 우측을 선택하였다. 침수법에 의하여 부피를 측정하고 밀도공식에 의하여 질량을 산출하였고, 평형측정판법에 의하여 무게중심을 구하였다. 연구결과 1. 인체계측항목에서 살펴보면 남자의 경우 둘레에서 체질별로 유의한 차이가 있었다. 2. 체적에서 살펴보면 남자의 경우 태음인과 소음인에서 유의한 차이가 있었고, 특히 두경부, 손, 발의 경우 태음인이 가장 작은 비율을 나타냈고 소음인이 가장 컸다. 3. 무게중심은 남자의 경우 소양인이 다른체질에 비하여 위에 있었다.