• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.751-762
• /
• 2015

This study was performed to investigate the stability of soil moisture in controlling air ventilation rate within a horizontal biofilter, and to compare removal efficiency (RE) of indoor air pollutants including fine dust, volatile organic compounds (VOCs), and formaldehyde (HCHO), depending on whether dieffenbachias (Diffenbachia amoena) were planted in the biofilter. The relative humidity, air temperature, and soil moisture contents showed stable values, regardless of the presence of D. amoena, and the plants grew normally in the biofilter. REs for number of fine dust particles (PM10 and PM2.5) within the biofilter filled with only soil were at least 30% and 2%, respectively. REs for number of fine dust particles (PM10 and PM2.5) within the biofilter including the plants were above 40% and 4%, respectively. RE for fine dust (PM10) weight was above 4% and 20%, respectively, in the biofilter containing only soil or soil together with plants. In the case of the biofilter filled with only soil, REs for xylene, ethylbenzene, toluene or total VOC (T-VOC) were each more than 63%; however, REs for benzene and formaldehyde (HCHO) were above 22% and 38%, respectively. In the biofilter with the plants, REs for xylene, ethylbenzene, toluene, and T-VOC were each above 72%, and REs for benzene and HCHO were above 39%. Thus, RE of the biofilter integrated with plants was found to be higher for volatile organic compounds than for fine dust. Hence, the biofilter was very effective for indoor air quality improvement and the effect was higher when integrated with plants.

• Korean Journal of Poultry Science
• /
• v.33 no.3
• /
• pp.233-238
• /
• 2006

In order to study the effect of feeding rare earth(RE) on growth of broiler chicks, feed conversion ratio, and probable harmfulness of feeding high levels of RE, two feeding trials with broiler chicks were conducted; one using a commercial broiler compound feed and the other using a self mixed feed excluding any growth stimulating feed additives. The the first trial used three hundred sixty of one day old Cobb broiler chicks for six levels of dietary supplementation of RE : 0, 100, 200, 400, 800 and 1,600 mg/kg. There were significant effect of RE stimulating broiler chick growth and improving feed conversion ratio, The dietary supplementation of RE at a level of 100 mg/kg was the best of all and increased body weight gain by 8.9% (p<0.05). Chicks fed RE at a level of 1,600 mg/kg grew as good as chicks fed feeds without RE and did not show my abnormalities. The second feeding trial was conducted in the same manner as the first trial using Ross broiler chicks and self-mixed experimental diets supplemented with RE at levels of 0, 50, 100 and 150 mg/kg. Differently from Results of the first trial, body weight gain and feed conversion ratio of were the best at the level of 50 mg/kg RE supplementation(p<0.05). In this trial all the birds fed RE showed significantly lower ratio of abdominal fat against live weight than those of the control group birds. Overall, it can be said that dietary supplementation of RE will improve broiler growth and feed conversion ratio and the proper dietary level would be $50\sim100mg/kg$. These results suggested that the proper level of RE for broiler chicks would be 50 to 100 mg/kg and its effectiveness is varied depending upon RE mixture. There appears abdominal fat of broiler chicks is decreased by feeding RE but further investigation is in need.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1660-1663
• /
• 2003

This paper present the characteristics of radiation pattern of microstrip slot antenna on the ground plane fed by microstrip line. It is proposed for resonance frequency at 10 GHz. We will analysis two shape of slot antenna; double L-shape slot antenna and U-shape slot antenna. In this case, we will compare far-field radiation pattern of two shape slot antenna. Far-field radiation pattern of double L-shape slot antenna is bi-directional nevertheless U-shape slot antenna is uni-directional. The microstrip slot antenna is propose to analyze far-field radiation pattern for use in the wireless communication systems

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.466-469
• /
• 2004

In this paper, we improve the matching impedance of antennas by inserting parasitic slots on the ground plane of right-angle triangular slot antennas. The designed antennas characteristics are analyzed by using Finite Different Time Domain (FDTD) method, the specific design frequency is 10 GHz and match impedance is 50 ohms. Simulation results show that the efficient of return loss and radiation patterns are improved and enhance. In this case, the right-angle triangular slot antennas with parasitic slots have matching impedance better than antennas without parasitic slots.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1672-1675
• /
• 2003

Microstrip antennas have many applications in wireless communication system. This paper propose a analytical far-field pattern of radiation for application of the wireless communication. The triangular slot antenna fed by micorstrip line is proposed at resonance frequency 10 GHz. The simulation results of the electromagnetic field radiation pattern, S parameter, characteristic of input impedance are obtain by using the finite difference time domain (FDTD) method. The analytical space in FDTD analysis are $50{\times}171{\times}120$ cells with the cell dimension ${\Delta}x=0.152\;mm$, ${\Delta}y={\Delta}z=0.15\;mm$.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.5
• /
• pp.243-249
• /
• 2007

The age hardening behavior and mechanical properties of an extruded Al-Zn-Mg-(Cu)-0.1 wt.%Sc alloy were investigated with the Sc addition and ageing temperature. The results showed that the $Al_3Sc$ compounds were formed by Sc addition and distributed preferentially along the extrusion direction. The age hardening of Al-Zn-Mg-Cu-0.1 wt.%Sc alloy which was treated by T6 process was more significant than that of Al-Zn-Mg-0.1 wt.%Sc alloy. The tensile property of Al-Zn-Mg-Cu+0.1 wt.%Sc alloy was also higher than that of Al-Zn-Mg-0.1 wt.%Sc alloy, which is 691 MPa and 584 MPa in strength and 9% and 11% in elongation, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.299-302
• /
• 2009

The objective of the present study is to analyze the transient flow through theejector system with the help of a computational fluid dynamics (CFD) method. An attempt is made to investigate the interesting and conflicting phenomenon of the infinite entrainment into the primary stream without an infinite mass supply from the secondary chamber. The results obtained show that the one and only condition in which an infinite mass entrainment can be possible in such types of ejectors is the generation of a re-circulation zone near the primary nozzle exit. The flow in the secondary chamber attains a state of dynamic equilibrium of pressures at the onset of the recirculation zone. A steady flow in the ejector system is valid only after this point.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.936-939
• /
• 2002

FPCA is the necessary device to design of hardware at present, it is researched on many ways of applying to design caused by expansion of capacity in recent years. One of these applying ways is SoC (System on a Chip) that is proposed for realizing the basic function of a system. For realizing SoC efficiently, IP (Intellectual property) is very important and developed for re-use of hardware. A MPU for built-in exists as an IP. But almost of MPUs at present as an IPs are lengthy and large-scale for using embedded-application. Furthermore, the function of executing specific treatment critically is required to embedded MPU. We propose a flexible and small scale MPU and its design method.

• The Korean Journal of Emergency Medical Services
• /
• v.5 no.1
• /
• pp.73-88
• /
• 2001

Post these safety tips in any swimming area for all swimmers to read. 1. Always swim with companions. Swim only in area well supervised by lifeguards. 2. Never drink alcohol or use drugs when you're swimming or boating. 3. Always check the water depth. Walk in from shore or ease in from the dock or the edge of the pool. 4. Know the limits of your own swimming abilities. If you're a good swimmer, don't tempt nonswimmers or beginner swimmers to try to keep up with you. 5. Keep any eye on younger swimmers at all times. 6. Learn the proper way to dive in the water safely. Follow guidelines for safe diving. 7. Follow the lifeguards instructions and respect their judgment. Never fake an Emergency. Obey all swimming rules.