• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.134-139
• /
• 2009

Various modules are generally combined with one another in order to perform rotorcraft preliminary design and its optimization. At the stage of the preliminary design, analysis fidelity is less important than the rapid assessment of a design is. Most of the previous researchers attempted to implement sophisticated applications in order to increase the fidelity of analysis, but the present paper focuses on a rapid assessment while keeping the similar level of fidelity. Each small-sized module will be controlled by an externally-operated global optimization module. Results from each module are automatically handled from one discipline to another which reduces the amount of computational effort and time greatly when compared with manual execution. Automatically handled process decreases computational cycle and time by factor of approximately two. Previous researchers and the rotorcraft industries developed their own integrated analysis for rotorcraft design task, such as HESCOMP, VASCOMP, and RWSIZE. When a specific mission profile is given to these programs, those will estimate the aircraft size, performance, rotor performance, component weight, and other aspects. Such results can become good sources for the supplemental analysis in terms of stability, handling qualities, and cost. If the results do not satisfy the stability criteria or other constraints, additional sizing processes may be used to re-evaluate rotorcraft size based on the result from stability analysis. Trade-off study can be conducted by connecting disciplines, and it is an important advantage in a preliminary design study. In this paper among the existing rotorcraft design programs, an adequate program is selected for a baseline of the design framework, and modularization strategy will be applied and further improvements for each module be pursued.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.117-121
• /
• 2006

Virgin bleached kraft pulp, CPO (computer printout) and white ledgers are main raw materials used in tissue mills. The utilization rate of recycled fibers and virgin pulp in South Korea tissue industry are 90% and 10%, respectively. To improve brightness of printing grades the use of 'fluorescent whitening agents (FWAs)' or 'optical brightening agents (OBAs)' has been increased. When recycling these papers for tissue production, it is unavoidable that FWAs contained in recycled papers flow into tissue production lines and remain in the products. And this draws great attention from the public. This study was carried out to develop a technology for the removal of fluorescent whitening agents from recycled fibers. Enzymatic removal of FWAs was evaluated as a method to remove FWAs from the recycled fiber. The ${\alpha}-amylase$ that degrades starched used for surface sizing of fine papers and contained substantial condition is needed to prevent the re-adsorption of FWAs on fibers. The temperature of pulp suspension was another important factor affecting on FWA removal. The higher the temperature, the greater the efficiency of removing FWAs was obtained. Optimum pH and temperature for the effective removal of FWAs were suggested to be pH 8.5 and $65^{\circ}C$, respectively. The enzymatic removal of FWAs showed a great synergistic effect when proper control in pH and temperature was made.

• 수산해양기술연구
• /
• 제37권3호
• /
• pp.196-213
• /
• 2001

체장어군탐지기(fish sizing echo sounder) 의송.수파기로서 사용하기 위한 split beam 음향 변환기를 개발하기 위한 시도로서, Dolph Chebyshev배열 기법을 이용하여 36개의 압전 진동소자에 진폭 가중치를 부여한 평면배열 음향 변환기를 설계.제작하고, 이 변환기의 수중음향방사 특성에 대해 분석.고찰한 결과를 요약하면 다음과 같다. 1. split beam 음향 변환기의 4 개의 독립적인 진동자 블록에 대한 수중에서의 평균적인 공진 및 반공진 주파수는 각각 69.8 kHz. 83.0 kHz이었고, 이들 공진과 반공진 주파수에서의 임피던스는 49.2$\omaga$. 704.7$\omaga$이었다. 음향변환기의 4 개의 모든 진동자 블록 (sum beam)에 대한 수중에서의 공진 및 반공진 주파수는 각각 71.4 kHz, 82.1kHz이었고. 이들 공진과 반공진 주파수에서의 임피던스는 15.2$\omaga$, 17.3$\omaga$이었다. 2 split beam 음향 변환기의 4 개의 독립적인 진동자 블록에 대한 최대 송파전압감도(TVR)는 공통적으로 70.0 kHz에서 165.5 dB이었고, -3 dB 점에 대한 송신 주파수 대역폭은 10.0 kHz이었다. 또한. split beam 음향 변환기의 4 개의 조합된 진동자 블록에 대한 최대 수파감도(SRT)는 공통적으로 75.0 kHz에서 -177.5 dB이었고, -3 dB 점에 대한 수신 주파수 대역폭은 10.0 kHz이었다. 3.split beam 음향 변환기의 모든 진동자 블록에 대한 송신 지향성패턴은 원형이었고, -3 dB점에 대한 수평 및 수직방향에 대한 반감각(half beam angle)은 공통적으로 $9.0^\circ$이었다. 또한. 수평방향에 대한 제 1차 부엽 준위는 $22^\circ$및 $-26^\circ$에서 각각 -19.7 dB. -19.4 dB이었고. 수직방향에 대한 제1차 부엽 준위는 $22^\circ$및 $-26^\circ$에서 각각 -20.1 dB, -22.0 dB로서 설계 목표치 -20 dB과 매우 유사한 값을 나타내었다. 4.split beam 음향 변환기의 송파응답파형과 수파응답파형은 각각 송신 및 수신 공진주파수 부근인 70.0 kHz와 75.0 kHz에서 전기 입력펄스파형과 가장 유사한 특성을 나타내었다. 5. 본 연구에서 설계, 개발한 split beam 음향 변환기의 성능을 분석하기 위해 반사강도 보정을 위한 지향성손실과 물표의 위치각을 추정하기 위한 실험을 행한 결과 실험적으로 추정한 위치각은 실제적인 위치각과 잘 일치하였다.