• 제목/요약/키워드: Re-bar

검색결과 173건 처리시간 0.024초

폭압에 의한 방폭문의 구조적 안정성에 대한 연구 (A Study On Structural Stability Of Blast Door by Blast Pressure)

  • 김남혁;박관진;이근오
    • 한국안전학회지
    • /
    • 제31권3호
    • /
    • pp.8-15
    • /
    • 2016
  • The purpose of this study is to design a model with the structural stability so as not to lose the operational function due to structural plastic or fail of a sliding blast door by blast pressure to this aim, a numerical simulation was performed using full-size experiments and M&S (Modeling & Simulation) of the sliding blast door. The sliding blast door ($W3,000{\times}H2,500mm$) under the blast load is in the form of a sliding type 2-way metal grill, which was applied by a design blast pressure (reflected pressure $P_r$) of 17 bar. According to the experimental results of a real sliding blast door under blast load, the blast pressure reached the sliding blast door approximately 4.3 ms after the explosion and lasted about 4.0 ms thereafter. The maximum blast pressure($P_r$) was 347.7 psi (2,397.3 kPa), it is similar to the UFC 3-340-02 of Parameter(91 %). In addition, operation inspection that was conducted for the sliding blast door after real test showed a problem of losing the door opening function, which was because of the fail of the Reversal Bolt that was installed to prevent the shock due to rebound of the blast door from the blast pressure. According to the reproduction of the experiment through M&S by applying the blast pressure measurement value of the full-size experiments, the sliding blast door showed a similar result to the full-size experiment in that the reversal bolt part failed to lose the function. In addition, as the pressure is concentrated on the failed reversal bolt, the Principal Tensile Failure Stress was exceeded in only 1.25 ms after the explosion, and the reversal bolt completely failed after 5.4 ms. Based on the result of the failed reversal bolt through the full-size experiment and M&S, the shape and size of the bolts were changed to re-design the M&S and re-analyze the sliding blast door. According to the M&S re-analysis result when the reversal bolt was designed in a square of 25 mm ($625mm^2$), the maximum pressure that the reversal bolt receives showed 81% of the principal tensile failure stress of the material, in plastic stage before fail.

핵의학 검체검사 정도관리의 개선을 위한 Westgard Multi-Rules의 적용 (Application of Westgard Multi-Rules for Improving Nuclear Medicine Blood Test Quality Control)

  • 정흥수;배진수;신용환;김지영;석재동
    • 핵의학기술
    • /
    • 제16권1호
    • /
    • pp.115-118
    • /
    • 2012
  • Levey-Jennings 정도관리는 측정치가 관리 허용치(평균 ${\pm}2SD$ 또는 ${\pm}3SD$)를 벗어나는 우연오차만 관리를 했었다면, Westgard Multi-Rules 정도관리는 우연오차와 계통오차의 분리분석을 할 수 있고 복합적용이 가능해 병원 인증 내부정도관리에서도 적극 권장하고 있다. 하지만 검체검사 정도관리에서는 kit 내 같은 기질의 정도관리 물질을 사용해 계통오차의 인지가 쉽지 않고 잦은 농도 변경으로 목표치 설정이 어려워 Westgard Multi-Rules의 적용이 힘들었다. 따라서 본 연구는 정도관리 물질을 상용화된 제 3의 물질을 사용해 신뢰성 있는 목표치를 산출하고 Westgard Multi-Rules을 적용함으로써 정도관리를 개선하고자 한다. 갑상선 검사인 Total T3를 대상으로 정도관리 물질을 B사의 Immunoassay Plus Control Level 1, 2, 3를 사용하여 ${\pm}2SD$를 벗어난 값을 제외한 1개월 동안 295회 데이터의 평균값으로 목표치를 설정하였다. 그리고 20일간 총 194회 실험의 정도관리 물질 측정치를 표준편차 지수를 이용하여 하나의 관리도상에 놓고 Westgard Multi-Rules 중 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T의 규칙들을 적용하여 우연오차와 계통오차를 분리하여 분석하였다. Total T3의 목표치는 정도관리 물질 1, 2, 3번이 각각 84.2 ng/dl, 156.7 ng/dl, 242.4 ng/dl로 설정되었고 표준편차는 각각 11.22 ng/dl, 14.52 ng/dl, 14.52 ng/dl로 설정되었다. 설정된 목표치를 기준으로 Westgard Multi-Rules을 적용한 뒤 유형을 분석한 결과 우연오차인 12s가 48회, 13s가 13회, R4s가 6회로 분석되었고 계통오차인 22s는 10회, 41s가 11회, 2 of 32s가 17회, $10\bar{x}$가 10회로 분석되었으며 7T는 적용되어지지 않았다. 통제 불가능한 우연오차의 유형들은 전체실험과정을 재확인하고 재검사 비중을 높이는 등의 조치를 취하였으며 통제 가능한 계통오차의 유형들은 원인을 찾아 조치사항 양식에 기록하고 필요 시 내부정도관리 위원회에 보고하였다. 상용화된 제 3의 물질을 정도관리 물질로 사용하고 목표치를 설정함에 따라 하나의 관리도 상에서 3가지 정도관리 물질에 대한 Westgard Multi-Rules의 적용이 가능하게 되었고, 그 결과 12s, 22s, 13s, 2 of 32s, R4s, 41s, $10\bar{x}$, 7T 규칙들의 분석으로 우연오차와 계통오차의 정밀분석이 가능해 졌다. 또한 ${\pm}3SD$ 내의 모든 데이터를 분석 할 수 있어 Error 검출을 최대화 할 수 있게 되었다. 이와 같이 체계적으로 Westgard Multi-Rules을 적용한 정도관리는 검체검사의 정도관리에 질적 향상을 가져다 줄 것이다.

  • PDF

한국, 중국, 미국 소비자들의 에너지 바에 대한 인식 및 소비 행동 비교 연구 (A Comparative Study on the Perception and Consumption Behaviors of Korean, Chinese, and US Consumers for Energy bars)

  • 오지은;윤혜려
    • 한국식생활문화학회지
    • /
    • 제35권4호
    • /
    • pp.333-341
    • /
    • 2020
  • This study evaluated the perception, consumption behavior, and optional attributes of Korean, Chinese, and U.S. consumers of energy bar products. Data were compared and analyzed by surveying 300 consumers in each country. Significant differences were observed in preference for energy bars according to their nationality, in the order China, the U.S., and Korea. Perception of taste, types and dietary suitability of the products ranked lower for Korean consumers, as compared to consumers of the United States and China. The order dietary fiber, protein, and calcium were the sought-after nutritional requirements of the products. The demand for protein was significantly higher in the U.S. Calcium demand was low in the United States and China, but was very high in Korea, which could be attributed to the low calcium intake of Koreans. Other optional attributes which were closely associated with the purchase and re-purchase decision, included price, taste and delivery period. All three factors were recognized as important options in Korea, whereas awareness of packaging/appearance and brand was not. The taste, nutrients and price in the U.S. ranked high as important optional attributes, while the packaging, external and expiration dates were recognized as low. Unlike Korea and the U.S., important optional attributes for Chinese consumers were determined in the order expiration date, taste, and nutrients, and showed low perception for packaging, appearance, weight, counts, and prices. Evaluating the preference for the main and secondary ingredients, Koreans preferred nuts over grains, Americans preferred dried fruits over nuts, and Chinese preferred nuts and grains; both Korean and American consumers had low preference for dried vegetables. The preference for chocolate was low in Korea and China, whereas preference for jelly was high in China as compared to Korea and the U.S. The intention of purchasing energy bars was significantly lower in Korea than in the U.S. and China. A variety of nutritious functional bars have recently been distributed and sold in Korea, but they are mostly produced in the U.S., which is the largest producer and consumer worldwide. Taken together, results of this study indicate that the demand for nutritional enhancement and preferred materials vary according to the nationality. Hence, it is necessary to develop products that reflect these criteria. Further research is required to analyze the relationship between preference and consumption behavior for each material product developed in the future.

콘크리트피복충전 각형강관 기둥-보 접합부의 주기하중 실험 (Cyclic Loading Test for Beam-to-Column Connections of Concrete Encased CFT Column)

  • 박홍근;이호준;박성순;김성배
    • 한국강구조학회 논문집
    • /
    • 제26권1호
    • /
    • pp.55-68
    • /
    • 2014
  • 본 논문에서는 콘크리트충전 각형강관에 구조용 피복콘크리트를 적용한 합성기둥 접합부의 내진 성능을 평가하였다. 이를 위하여 두 개의 강재 보와 두 개의 프리캐스트 콘크리트 보에 대한 접합부 실험체를 제작하고 반복주기하중실험을 실시하였다. 2/3 축소모델인 기둥 단면은 670mm이고 보춤은 강재보의 경우 488mm, 588mm, PC보의 경우 700mm이다. 강재 보는 보의 춤을 실험 변수로 하였으며 PC보는 보의 휨철근비를 실험 변수로 하였다. 프리캐스트 콘크리트 보의 상부 휨철근비는 1.1%, 1.5%이다. 플랜지는 연속강판을 사용하여 강관과 연결하였으며 휨철근의 정착 및 이음을 위해서는 커플러를 적용한 특수 상세가 사용되었다. 실험결과, 하나의 강재보 실험체를 제외한 모든 실험체는 특수모멘트골조 기준인 4% 이상의 회전각을 발휘하였다. 특히 PC보 실험체는 강도와 변형능력, 에너지 소산에 있어서 우수한 성능을 보였다.

기존 임플란트 보철물의 불량한 유지관리를 개선하기 위해 임플란트 피개의치로의 상부 보철물 전환 증례 (Rehabilitation of a patient by converting poorly maintained fixed implant prosthesis into implant overdenture: a case report)

  • 김영규;정창모;윤미정;이소현;허중보
    • 대한치과보철학회지
    • /
    • 제60권1호
    • /
    • pp.127-134
    • /
    • 2022
  • 임플란트 실패의 경우에서 과도한 하중 및 염증이 실패율을 높이는 대표적인 원인이 된다. 특히, 임플란트 주변의 불량한 구강위생은 임플란트 실패의 가장 흔한 원인 중 하나이다. 임플란트 상부보철물의 실패가 발생할 경우, 임상의는 남은 고정체를 사용하여 재진단하고 평가하여 치료계획을 수립해야 한다. 임플란트를 추가 식립하여 새로운 보철물을 만들거나 남은 임플란트를 이용하여 임플란트 융합 가철성 의치 및 임플란트 피개의치로 치료를 시행할 수 있다. 본 증례의 환자는 상악 무치악부를 고정성 임플란트 보철물로 수복한 후 구강위생관리가 불가하여 임플란트 보철물 실패한 환자에서 잔존 임플란트의 지대주 및 부가적인 유지 장치를 장착한 milled bar를 이용하여 가철성 임플란트 피개의치로 전환하여 치료하였고 심미성과 저작기능, 지속적인 유지관리 면에서 장기적으로 만족할 만한 결과를 얻었기에 보고하는 바이다.

마이크로 강섬유 콘크리트를 적용한 연속 합성슬래브의 휨 및 균열 저항성능 (Flexural Performance and Cracking Resistance of Continuous Composite Slab using Micro Steel Fibers)

  • 황현종;박홍근;홍건호;김갑득;최세진
    • 콘크리트학회논문집
    • /
    • 제27권4호
    • /
    • pp.387-397
    • /
    • 2015
  • 본 연구에서는 시공성 향상을 위해 데크플레이트와 비정질강섬유 콘크리트를 적용하여 현장 무배근 슬래브 시스템을 연구하였다. 제안한 슬래브에서는 온도철근을 강섬유로 대체하였다. 본 연구는 연속슬래브에서 상부 철근이 연속되지 않는 경우 슬래브의 상부 균열 제어를 주로 고려하였다. 실험변수로 비정질강섬유 혼입량, 강섬유 종류, 데크플레이트 종류, 연속구간의 철근 이음을 고려하였으며, 수직하중을 받는 2경간 슬래브를 실험하였다. 슬래브의 균열저항성능을 평가하기 위하여 연속슬래브의 하중에 따른 균열폭을 계측하였다. 실험결과, 상부 이음철근을 사용하지 않더라도 합성슬래브의 높은 휨강성으로 인하여 균열을 억제할 수 있는 것으로 나타났다.

Finite element analysis of elastic solid/Stokes flow interaction problem

  • Myung, Jin-Suk;Hwang, Wook-Ryol;Won, Ho-Youn;Ahn, Kyung-Hyun;Lee, Seung-Jong
    • Korea-Australia Rheology Journal
    • /
    • 제19권4호
    • /
    • pp.233-242
    • /
    • 2007
  • We performed a numerical investigation to find out the optimal choice of the spatial discretization in the distributed-Lagrangian-multiplier/fictitious-domain (DLM/FD) method for the solid/fluid interaction problem. The elastic solid bar attached on the bottom in a pressure-driven channel flow of a Newtonian fluid was selected as a model problem. Our formulation is based on the scheme of Yu (2005) for the interaction between flexible bodies and fluid. A fixed regular rectangular discretization was applied for the description of solid and fluid domain by using the fictitious domain concept. The hydrodynamic interaction between solid and fluid was treated implicitly by the distributed Lagrangian multiplier method. Considering a simplified problem of the Stokes flow and the linearized elasticity, two numerical factors were investigated to clarify their effects and to find the optimum condition: the distribution of Lagrangian multipliers and the solid/fluid interfacial condition. The robustness of this method was verified through the mesh convergence and a pseudo-time step test. We found that the fluid stress in a fictitious solid domain can be neglected and that the Lagrangian multipliers are better to be applied on the entire solid domain. These results will be used to extend our study to systems of elastic particle in the Stokes flow, and of particles in the viscoelastic fluid.

서열환경에서 근적외선 조사의복 착용시의 온열생리반응 (The Study of Thermo-physiological Responses with Near Infrared Lighted Garment at a Hot Environment)

  • 김성숙;김우종;김희은
    • 한국의류산업학회지
    • /
    • 제7권6호
    • /
    • pp.665-672
    • /
    • 2005
  • The purpose of this study was to assess the feasibility and the effects of near infrared lighted garments on thermo-physiological responses in human body. Seven healthy adult men were recruited for this study. All subjects were informed the contents and purpose of this study. The experiment was carried out in a climate chamber of $32^{\circ}C$, 60%RH with 'Rest', 'Exercise' and 'Recovery' period. The experimental garments consisted of briefs, undershirts(sleeveless), nightclothes, T-shirts, knee-trousers and socks. Subjects participated in two experiments, one was wearing near infrared lighted garments(NIR-O), the other was wearing regular garments(NIR-X). The order of experiment was randomized, and subjects wore experimental garments before 24 hours in order to benefit by near infrared light. Measurement items included rectal temperature ($T_{re}$), mean skin temperature ($\bar{T}_{sk}$), sweat rate, heart rate, oxygen uptake and subjective sensation. The results are as follows: As to the variation of rectal temperature and mean skin temperature, value of wearing NIR-X was higher than value of wearing NIR-O, indicating a significant level of difference (p<.001). Sweat rate under NIR-O and NIR-X condition were 575.35 g and 535.75 g, respectively. Heart rate value of NIR-X condition was higher than NIR-O. Oxygen uptake measured during experiment was the higher in NIR-X condition with significant difference (p<.001). In the subjective sensation, the value of NIR-O condition was higher than NIR-X condition without significantly difference.

BIM 저작도구를 활용한 도로공사 수량산출 자동화 활용성 분석 (Analysis for the Applicability of Automated Quantity Take-off Technique Using BIM Authoring Tools on Road Construction)

  • 문진석;원지선;최원식
    • 한국산학기술학회논문지
    • /
    • 제14권10호
    • /
    • pp.5184-5191
    • /
    • 2013
  • 최근 BIM저작도구를 활용한 자동수량산출에 대한 관심이 많아지고 있으며, 단순한 부피, 개수, 면적 등의 단위계산 뿐만 아니라, BIM 기술을 이용한 물량산출의 정확성과 효율성에 대한 연구가 수행되고 있다. BIM 저작도구를 통한 자동수량산출은 매우 유용한 기능이나, 내역서 항목별 수량산출을 위해서는 모델링의 상세 수준을 높이는 등 많은 시간과 비용이 투입되어야 한다. 이에 본 연구에서는 2D 기반으로 설계된 도로건설공사 도면을 바탕으로 BIM 저작도구 이용하여 토공 및 도로공과 구조물을 3D 모델링 하고 BIM 저작도구에서 제공하는 자동물량산출기능을 통해 활용성을 살펴본다. 그 결과 토공 및 도로공이나 구조물공에 대하여 산출되는 자동수량산출의 항목들은 매우 제한적이나, 철근 모델은 수량산출서 항목의 대부분을 지원함을 알 수 있다.

부착식 앵커의 인발강도에 관한 연구 (A Study on the Pull-out Strength of Bond Type Anchors)

  • 서성연
    • 한국강구조학회 논문집
    • /
    • 제30권2호
    • /
    • pp.105-114
    • /
    • 2018
  • 최근 건축물의 보수, 보강 및 리모델링시 중량물 및 구조부재를 부착시키거나 고정하는데 있어서 시공의 유연성 및 용이성으로 후설치 부착식 케미컬 앵커의 사용량이 점점 증가하고 있는 실정이다. 외국에서는 1980년대 초부터 후설치 부착식 케미컬 앵커에 대한 다양한 해석 및 실험을 통한 설계식을 제시하여 실제 설계에 사용하고 있으나, 현재 우리나라에서는 설계자와 시공자가 신뢰할 수 있는 명확한 설계기준이 없는 상태로서 외국의 설계기준에 의존하고 있는 실정이다. 따라서 본 연구에서는 비균열 무근콘크리트에 매입된 후시공 앵커를 대상으로 앵커간격, 묻힘깊이 그리고 연단거리를 변수로 한 인발실험을 통하여 케미컬앵커의 인발강도에 미치는 제요소를 평가하고자한다.