• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.313-320
• /
• 2008

A typical software development life cycle consists of a series of phases, each of which has some ability to insert and detect defects. To achieve desired quality, we should progress the defect removal with the all phases of the software development. The well-known model of phase-based defect profile is Gaffney model. This model assumes that the defect removal profile follows Rayleigh curve and uses the parameters as the phase index number. However, these is a problem that the location parameter cannot present the peak point of removed defects when you apply Gaffney model to the actual situation. Therefore, Gaffney model failed to represent the actual defect profile. This paper suggests two different models: One is modified Gaffney model that introduce the parameter of Putnam's SLIM model to replace of the location parameter, the other is the growth function model because the cumulative defect profile shows S-shaped. Suggested model is analyzed and verified by the defect profile sets that are obtained from 5 different software projects. We could see from the experiment, the suggested model performed better result than Gaffney model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.8
• /
• pp.1136-1145
• /
• 1993

The channel capacities of various lading channels are calculated and compared with that of Gaussian noise channel to find out the decrements of channel capacity according to each fading environment. As a result, it is confirmed that the channel capacities in Rician and m-distribution fading channels approach to that of Gaussian noise channel as direct-to-indirect power ratio in Rician fading channel and fading index m in m-distribution fading channel increases respectively. And the difference between two channel capacities of Gaussian noise channel and each fading channel which is dependent on carrier-to-noise power ratio (CNR) is found. Also the improvement of channel capacity of Rayleigh fading channel by introducing two-branch diversities is obtained. For diversity reception, predetection maximal-ratio and postdetection selective combining techniques are adopted. The results show that the improvement of channel capacity by predetection maximal-ratio combining diversity is superior to the postdetection selective combining diversitiy regardless of correlation coefficient between two diversity branches in Raylelgh fading channel. The best improvement is achieved when two branches are noncorrelative in both two diversify techniques and as correlation coefficient of two diversity branches is smaller, the improvement of channel capacity is greater.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.267-274
• /
• 2009

Breakup and spray formation of pressure-swirl liquid jets injected into a low-speed convective-flow are experimentally investigated. Effects of the cross-flows on the macroscopic and microscopic spray parameters are optically measured in terms of jet Weber number and liquid-to-gas momentum ratio. The liquid stream undergoes Rayleigh jet breakup at lower jet Weber numbers and a liquid sheet isn't formed because of the weak radial velocity in the swirl jet. At higher jet Weber numbers, the macroscopic spray parameter is a very weak function of the momentum ratio but the effect of the convection on the microscopic spray parameter is significant through the secondary breakup with increasing in the liquid-to-gas momentum ratio. The convective-flow promotes bag/plume breakup and the spray formation, and its effect is more distinct at higher momentum ratio.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.61-70
• /
• 2006

3-D S-wave velocity model in the southern Korean Peninsula is investigated by using the joint inversion of receiver functions and surface-wave dispersion. A peninsula average Rayleigh-wave phase velocity in the 10-150 seconds range and tomographic estimates of the Rayleigh and Love wave group velocities in the 0.5-20 seconds period range determined using a $12.5{\times}12.5\;km$ grid for the southern part of the peninsula are used for the inversion. Receiver functions were determined from broadband (STS-2), short-period (SS-1) and acceleration (Episensor) channels of 95 stations. The dense distribution of the stations in the Peninsula permits us to examine the 3-D crustal structure in detail. The inversion result shows the variation and characteristics of S-wave velocity in the crust and upper mantle of the southern Korean Peninsula very well.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.40-47
• /
• 2012

In dual-hop relaying systems, the conventional partial relay selection is based on the channel information only for the first hop. On the other hand, the efficient partial relay selection is based on the channel information for the hop with the minimum of the average channel powers for the first and second hops at each end-to-end link since the correlation coefficient between the end-to-end link quality and the link quality of the hop with the minimum of the average channel powers for the first and second hops is larger than that between the end-to-end link quality and the link quality of the other hop. In this paper, the outage probability of the conventional partial relay selection and the efficient partial relay selection in dual-hop decode-and-forward relaying systems is analyzed for non-identically distributed Rayleigh fading channels. Through numerical investigation, the outage performance of the efficient partial relay selection is compared with the outage performances of the conventional partial relay selection and the best relay selection based on all the channel information for the first and second hops.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1462-1470
• /
• 1999

In this paper, the performance of packet radio networks using the ALOHA protocol in Rayleigh fading channels is analyzed in terms of the capture probability and the throughput. We consider capture effect in order to increase the probability of the channel access and to include cellular environment we assume that the traffic is a truncated bell-shaped distribution. The packet proposed in this paper consists of a competition part and a data part to decrease the probability of collision in the channel access. In the competition part, DS system with common spreading code is used and in the data, hybrid DS/FH system is used. We consider the linear correlation receiver and the hard-limiting correlation receiver as the receiver model. BPSK modulation is also employed. Because hybrid DS/FH systems are not sensitive to variation of the interference power, as we choose a proper chip number N and a frequency hopping number q, we can obtain a steady system performance even though the variation of interference power is severe fading channels such as Rayleigh fading.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.3
• /
• pp.56-65
• /
• 1996

Recently, with development of mechanics of materials, as pursuing the high speed of the ships, there has been an increasing demand on the composite construction which satisfies high strength and low weight at the same time. A sandwich element is a type of composite construction, which is composed of thin, strong, stiff and relatively high density faces and a thick, light, and weaker core material. As the second moment is increased by faces separated from the neutral axis farther, a sandwich element is most effective light structural form. In this study, Rayleigh-Ritz Energy Method is adopted, which can analyze sandwich plate relatively simply and exactly. Stresses and buckling loads are analyzed exactly, when uniform lateral pressure load, inplane compression and inplane shear are acting at the sandwich plate. Including a wrinkling stress, this study can be applied to the initial design and minimum weight design of sandwich plates.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.8-16
• /
• 2010

An orthogonal frequency division multiplexing (OFDM) system is a special case of multicarrier transmission, where a single data stream is transmitted over a number of lower-rate subcarriers. One of the main reasons to use OFDM is to increase robustness against frequency-selective fading or narrowband interference. However, in the radio systems the distortion introduced by high power amplifiers (HPA's) such as traveling wave tube amplifier (TWTA) considered in this paper, is also critical. Since the signal amplitude of the OFDM system is Rayleigh-distributed, the performance of the OFDM system is significantly degraded by the nonlinearity of the HPA in the OFDM transmitter. In this paper, we propose a simplicial canonical piecewise-linear (SCPWL) model based digital predistorter to compensate for nonlinear distortion introduced by an HPA in an OFDM system. Computer simulation is carried on an OFDM system under additive white Gaussian noise (AWGN) channels with 16-QAM and 64-QAM modulation schemes and modulator/demodulator implemented with 1024-point FFT/IFFT. The simulation results demonstrate that the proposed predistorter achieves significant performance improvement by effectively compensating for the nonlinearity introduced by the HPA.

• The KIPS Transactions:PartD
• /
• v.9D no.1
• /
• pp.75-80
• /
• 2002

Putnam develops SLIM (Software LIfecycle Management) model based upon the assumption that the manpower utilization during software project development is followed by a Rayleigh distribution. To obtain the manpower distribution, we have to be estimate the total development effort and difficulty ratio parameter. We need a way to accurately estimate these parameters early in the requirements and specification phase before investment decisions have to be made. Statistical tests show that system attributes are highly correlation (redundant) so that Putnam discards one and get a parameter estimator from the other attributes. But, different statistical method has different system attributes and presents different performance. To select the principle system attributes, this paper uses the principle component analysis (PCA) instead of Putnam's method. The PCA's results improve a 9.85 percent performance more than the Putnam's result. Also, this model seems to be simple and easily realize.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.1-10
• /
• 2001

The 3-step cell search has been considered for fast acquisition of the scrambling code unique to a cell in the W -CDMA system. In this paper, the performance of the cell search scheme is analyzed in Rayleigh fading channels. And the system parameters for cell search scheme and the design parameters for the receivers are examined. The probabilities of detection, miss and false alarm for each step are derived in closed forms based on the statistics of CDMA noncoherent demodulator output. Through the analysis, the effect of threshold setting and post detection integration for each step is investigated, and the optimal values of the power allocation for the synchronization channels are also considered. The number of post-detection integrations for each step is a design parameter for the receiver, and the optimum values may depend on not only the power allocation for each channel related to the cell search, but the false alarm penalty time. It is shown that optimal values could be determined through the analysis. Also, the cumulative probability distribution of the average cell search time is obtained.