• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.12
• /
• pp.3026-3032
• /
• 2000

To enhance the effective data transfer rate the multi-beam optical disk drive is presented. The Beam rotating actuator is necessary for putting multi-beam on more than one track. Ray tracing was also executed for real system set-up. The beam Rotating Actuator is made up of piezoelectric material, high stiffness wire hinge and dove prism. The actuator has about 1kHz natural frequency and suitable operational range. The dynamic equation for the actuator is derived for the control real system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.51-51
• /
• 2004

렌즈는 광학제품의 성능에 직접적인 영향을 미치는 주요 부품으로서, 고정도의 형상 및 안정된 내부물성을 요구하는 정밀 부품이다. 광학 렌즈는 특정 광학계 내에서 입사광이 원하는 위치에 초점을 맺을 수 있도록 굴절시켜주는 역할을 하며, 이를 위해 초점거리, 배율, 렌즈의 성능 등을 종합적으로 고려하여 렌즈의 형상을 설계해야 한다. 이러한 설계과정은 기하광학에 기반한 광선추적(Ray tracing) 기법을 통해 이루어지며, 주로 CodeV, OSLO 등의 상용 광학계설계 소프트웨어를 사용하여 수행되고 있다.(중략)

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.204.1-204.1
• /
• 2012

We present SCOTS test simulation for on axis segment of the GMT secondary mirror that is ellipsoidal shape surface of 1.064m in diameter, 4.166747m in radius of curvature, -0.7154 in conic constant and $18.023{\mu}m$ P-V in asphericity. SCOTS test comprises a screen(diffusing sinusoidal fringe source), test surface(GMT secondary mirror), and a camera(CCD detector). We report ray tracing simulation result that is distorted sinusoidal fringe pattern detected at the camera. This simulation is to be used for analysis of experimental design, sensitivity from uncertainty, errors on fabrication and design.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.93-102
• /
• 2003

One of the promising optical daylighting systems is light shelf type daylighting system, Two types of lighting performance analysis methods are 1) Ray-Tracing method and 2) Radiosity method. The purpose of this paper is to compare two methods in terms of advantages and disadvantages by further looking at the detail algorithm. Also. model verification with Lightscape simulations has been conducted. Effectiveness of light penetration factor in terms of daylighting factor has been investigated and quantified. In summer time. the performance of the light shelf was twice better than the case without it.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.116-119
• /
• 2002

A performance of a new positron polarimeter is investigated by simulation using a charged-particle trajectory program. The results of the ray tracing are presented along with the details of the design parameters and projected system performance. A ray tracing analysis indicates that this design is capable of effectively transmitting positrons at beam energies varying from 0.1 to 30 keV within the beam diameter of 2-6mm. However, the observed reflection of the positrons(lower than 2 keV) at 12 kGauss indicated that further refinement of beam design is needed to produce a better positron polarimeter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.989-996
• /
• 2011

An understanding of the concentrated solar flux is critical for the analysis and design of solar-energy-utilization systems. The current work focuses on the development of an algorithm that uses the Monte Carlo ray-tracing method with excellent flexibility and expandability; this method considers both solar limb darkening and the surface slope error of reflectors, thereby analyzing the solar flux. A comparison of the modeling results with measurements at the solar furnace in Korea Institute of Energy Research (KIER) show good agreement within a measurement uncertainty of 10%. The model evaluates the concentration performance of the KIER solar furnace with a tracking accuracy of 2 mrad and a maximum attainable concentration ratio of 4400 sun. Flux variations according to measurement position and flux distributions depending on acceptance angles provide detailed information for the design of chemical reactors or secondary concentrators.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1017-1024
• /
• 2002

In this paper, we present the analysis of radio wave propagation characteristics in curved tunnels. Tunnel propagation models are performed in two cases which are using ray-tracing method for straight tunnels and geometrical optics extension to the standard hybrid waveguide model for curved ones. By regression analysis for measured power based on distance between the transmitter and the received antenna in tunnels that have 3.5 m $\times$ 6 m cross section and limited wall depth path loss are 0.19 dB/m for straight section and 0.68 dB/m for curved ones. By comparing model analysis with measurement in tunnels, it has been shown that the simulated results of tunnel propagation models are similar to the measured values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.688-697
• /
• 2008

In this paper, an analysis method for indoor optical wireless channel properties based on photon model is presented for characterization of communication environment. In contrast to radio waves, optical waves have very short wave-lengths and very high frequencies, so that material properties become important. Channel models including diffuse reflections and absorption effects due to material surface textures make conventional electromagnetic wave analysis methods based on ray tracing consume enormous time. To overcome these problems, an analysis method using photon model is presented that approximates light intensity by a density of photons. The photon model ensures that simulation time is within a predictable limit.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.625-630
• /
• 2009

In this paper, we introduce the analysis and counter-measure of signal distortion of search radar equipped on the ship. Using ShipEDF program, the search radar's main antenna and ship structures are modeled in the view of electromagnetism. Ray tracing method is used for analysis of the search radar's radiation patterns in free space and ship condition. From analyzed radiation patterns, we can conclude that the search radar's signal distortion is due to radiation pattern distortion. We also analyze the surface current distribution of the mast to propose the counter-measure to reduce electro-magnetic field reflection of mast.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.127-128
• /
• 2007