• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.872-878
• /
• 2003

In this paper, we developed a simulator which can generate the polarization waves for the indoor wireless communications based on three dimensional ray tracing technique and verified the simulation results comparing with the measured data in indoor wireless propagation environments. Using the developed simulator, we analyzed the channel characteristic and polarization diversity reception characteristic for the vertical, horizontal and circularly polarized waves. From the analysis results, in the case of using circularly polarized wave it can be clearly seen that the multipath fading is markedly reduced compared to the vertical and horizontal polarized waves due to the reception characteristic of removing the odd time reflected waves.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.5
• /
• pp.57-61
• /
• 2001

This study introduces an algorithm for determination of hypocentral parameters using phase analysis and two-point ray tracing to enhance accuracy and stability of computations. When the magnitude of earthquake is relatively small(usually $m_{b}$<3.2), the PmP phase which looks like the first arrival phase may be observed without observing the Pn phase. In this case, the hypocentral parameters calculated by the existing method using the first arrival of P and S phases and by the method developed in this study using PmP and SmS phases show large differences. The computational results of determination of hypocentral parameters for actual earthquake events show that this method gives much smaller rms errors than the existing methods do.o.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.301-306
• /
• 2010

In this paper, a SIT(Source Independent Tree) method for ray tracing is proposed to enhance the efficiency of tree construction with reuse of sub tree in urban environment, As the SIT method is applied, the decrease of the number of nodes for picocell and microcell simulations is 100 times. And 88~98 % of the total nodes are reused with change of location of signal source from an analysis of node reuse efficiency. Therefore the proposed SIT method is useful in performance enhancement of ray tracing, especially, for multiple antenna simulation like as MIMO system and cell planning.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.187-198
• /
• 2009

In this work, we calculate drop in antenna gain, aperture phase distribution, and antenna pointing shift of KVN(Korean VLBI Network) 21m shaped Cassegrain antenna due to misalignments of antenna optics using ray-tracing method. The misalignments we considered are axial displacement of feed, axial displacement of sub-reflector, lateral displacement of feed, lateral displacement of sub-reflector, and sub-reflector tilt. Calculations are performed not only when these misalignments exist separately, but also when they exist at the same time. Although ray-tracing method is based on geometric optics which does not consider electromagnetic effects, we expect that this work enables us to align antenna optics which give the maximum gain.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.157-160
• /
• 2001

본 논문은 근거리에서의 차량간 통신에 밀리미터나 광전파를 분석하는데 효과적인 Ray Tracing방법을 도입하여 오율특성을 분석하였다. 분석환경으로는 간섭신호에 강한 장점을 지니며 산소흡수에 의한 감쇠가 크며 주파수 재사용효율이 좋은 60GHz 대역에서의 비트오율을 분석하였다. 전파모델로 지면반사파, 콘크리트벽에 의한 반사와 옆 도로를 달리는 차량에 의한 반사를 고려한 Two-Ray 라이시안 채널에서의 다중접속자에 의한 DS/CDMA 시스템의 비트오율특성을 분석하여 검토하였다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.105-108
• /
• 2004

The effect of thermal deformation of optical pick-up due to laser diode(LD) and LD driving integrated circuit on the optical performance of digital versatile disk(DVD) optical system was analyzed using the finite element analysis with initial surface residual stress conditions, and results were compared with the measured results with holographic interferometry. Ray tracing was performed using the deformed configuration of optical system.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.772-776
• /
• 2014

We report a numerical analysis of the light-extraction efficiency (LEE) of light-emitting diodes (LEDs) on patterned sapphire substrates (PSSs). We considered various n-sided, regular convex pyramids, where n is an integer and $n{\geq}3$. We then considered four cross sections: extruded, subtracted, truncated-extruded, and truncated-subtracted. Ray-tracing simulations were carried out with these polygonal pyramid patterns, and the dimensions of the patterns were systematically varied. Optimized pattern shapes were determined for large LEE. An extruded circular pyramid with a slant angle of $45^{\circ}$ was found to be the optimal patterned shape.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.942-946
• /
• 2010

As the major sources of interior noise of train at running condition are the wheel/rail contact noise, the traction motor's noise and the driving gear's noise and these noise sources are transmitted through the car body, the noises of HVAC and air duct can be ignored. But the interior noise of train at standstill condition is decided by HVAC's noise and noise from the diffuser through the air duct. the interior noise prediction of train at standstill condition should be performed considering the shape of air duct, the air velocity and noise reduction property inside the air duct. But it is hard to estimate the interior noise level by the numerical method. Therefore train maker predict the interior noise level using The commercial noise prediction program. This paper introduce the noise prediction method of the train at standstill condition using the commercial program appling the ray tracing method and statistical energy analysis.

• Laser Solutions
• /
• v.17 no.1
• /
• pp.17-21
• /
• 2014

Head up display is in increasing demand for advanced devices in the modern luxury vehicles. It helps drivers focus on driving environment on the road. While HUD technology with LED has advanced, the brightness in daylight can be still an issue to be resolved. Laser light source is a possible solution to overcome the brightness problem and optimal optics design is required for the best performance. Sample design of optics is proposed and detail procedure of lens design evaluation is presented in this paper. The results were characterized by using a ray tracing method and qualitative analysis for spot and DEE is also presented. The overall error or image distortion remained in the target range of $25{\mu}m$ and the simulated image demonstrated possible use in the automotive applications.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.575-576
• /
• 2006

It was analyzed qualitatively the light extraction in GaN-on-sapphire LEDs based on a simple model. The light extraction efficiency in the LEDs is simulated numerically by using ray tracing method. In the present study, the extraction efficiency was simulated on three different types of LEDs, which a have a different pattered sapphire substrate. And, the role of the patterned sapphire substrate are analyzed and discussed. Based on the analysis, the improvements of extraction efficiency in the LED structures were discussed and these analyses are helpful in the design of high brightness GaN LEDs.